Combustion synthesis of AlN doped with carbon and oxygen

Carbon-and-oxygen-doped AlN specimens were prepared by combustion synthesis using Al, graphite, and AlN. Graphite addition changed the product color from white to blue. By XRD, the lattice constant increased slightly with increasing carbon content. Blue AlN powder was synthesized with a molar ratio of the diluent AlN of 0.2-0.5 with a fixed graphite content of 0.05. At an AlN molar ratio exceeding 0.6, carbon was not successfully incorporated due to the lower reaction temperature. Calcination at 800°C in air removed residual graphite without changing the crystal structure or product color. Oxygen, nitrogen, and carbon analyses revealed that blue AlN powders contained 0.45-0.54 mass% carbon and 1.4-1.6 mass% oxygen, while the undoped AlN contained 0.021 mass% carbon and 0.94 mass% oxygen. The origin of the white-to-blue color change was investigated via reflection measurements. Blue AlN exhibits an absorption peak at 634 nm (1.96 eV). From first-principles electronic structure calculations, the C-doped AlN and carbon-and-oxygen-doped AlN with a 1:1 ratio could be classified as p-type, whereas the O-doped AlN and 1:3 carbon-and-oxygen-doped AlN were n-type. One reason for the absorption peak at 634 nm may be a transition from the conduction band to an upper unoccupied state. These results suggest the possible control of optical and electronic properties of AlN via carbon-and-oxygen doping.     

Temperature-responsive culture surfaces for insect cell sheets to fabricate a bioactuator

ABSTRACT

For the first time, we have fabricated insect-derived cell sheets by using temperature-responsive culture surfaces having a phase-transition temperature below 25°C. We prepared the temperature-responsive cell culture surfaces (tissue culture polystyrene, TCPS) by grafting a copolymeric gel consisting of hydrophobic N-tert-butylacrylamide (tBAAm) and N-isopropylacrylamide (IPAAm) units. First, to characterize the hydrophilic and hydrophobic properties of the copolymeric gel-grafted surfaces, static water contact angles of each surface were measured at various temperatures. By increasing the amount of tBAAm in the grafted copolymeric gel, the transition temperature of the gel was shifted to lower temperatures. At 25°C, the grafted copolymeric gel was dehydrated, and the insect-derived cells (AeAl2 cells) adhered on all the copolymeric gel-grafted surfaces. At 20°C, AeAl2 cells cannot adhere on the P(IPAAm-1.62tBAAm)-TCPS surface (the initial molar ratio of IPAAm and tBAAm (tBAAm?=?1.62 mol%)) better than on other surfaces (TCPS and tBAAm?=?4.88, 8.17 mol%). These two findings implied that the lower critical solution temperature of the copolymeric gel-grafted-TCPS existed from 20°C to 25°C. The laminin-coated P(IPAAm-1.62tBAAm)-TCPS surface showed temperature-dependent cell attachment and detachment properties, while AeAl2 cells were not detached from the extracellular matrix uncoated P(IPAAm-1.62tBAAm)-TCPS surface. AeAl2 cells and insect muscle cells were harvested as the respective sheets.     

Study of the Antioxidative Properties of Several Amino Acid-Type Surfactants and their Synergistic Effect in Mixed Micelle

Cysteine and methionine, two sulfur-containing amino acids (AA), were introduced in their surfactant forms as potential antioxidants. The antioxidative (AOX) properties of lauroyl methionine (C12-Met) and lauroyl cysteine (C12-Cys) was investigated by means of the oxygen radical absorbance capacity assay. Both the surfactants exhibited excellent AOX behavior at the premicellar state and micellar medium. The AOX behavior was found to be comparable for both the surfactants at their premicellar states. However, in micellar medium, C12-Met showed better AOX property than C12-Cys. The AOX power of the surfactants was compared with other previously developed AA-type surfactants. The order of the AOX power was found to be: C12-tryptophan > C12-tyrosine ≈ C12-methionine ≈ C12-cysteine > C12-histidine at the premicellar state and C12-tryptophan > C12-tyrosine > C12-methionine > C12-cysteine > C12-histidine at the micellar state. C12-Cys displayed lower AOX property in micellar medium due to its dimer formation tendency. Based on the HPLC and UPLC-Q-TOF-MS analysis, the dimer formation of C12-Cys was found to be accelerated due to the micellar environment and results into negative synergistic effect on other aromatic AA-type surfactants. However, the presence of C12-His in the micellar solution of C12-Cys resulted no synergistic effect due to stronger H-bonding between the surfactants and resulting less dimer formation.     

Pressureless all-solid-state sodium-ion battery consisting of sodium iron pyrophosphate glass-ceramic cathode and β″-alumina solid electrolyte composite

In recent years, the expansion of demand for lithium ion batteries has resulted in soaring prices of the constituent resources. From the viewpoint of safety, studies on all-solid-state batteries are actively being carried out. In this study, we succeeded in driving all-solid-state batteries derived from nontoxic oxide glasses at room temperature without requiring scarce resources such as lithium and cobalt. The main structure of the ceramic batteries with a simple structure in which Na₂FeP₂O₇ crystallized glass and β″-alumina solid solution are joined by pressureless cofiring at 550°C. During the crystallization of Na₂O-Fe₂O₃-P₂O₅ glass, fusion with the β″-alumina solid solution is achieved. Reversible charge and discharge of 80 mAh/g were achieved at room temperature. It is not necessary to apply pressure during cell preparation or the use of the batteries. Furthermore, the strong junction at the cathode and electrolyte interface does not peel off during charge and discharge over a long period of 623 cycles. Ex situ X-ray photoelectron spectroscopy revealed partial Fe⁴⁺ induction and a reversible charge and discharge reaction even after overcharging to 9 V. It was demonstrated that Na₂FeP₂O₇ is very stable against overcharging to 9 V.     

Generation mechanism and prevention method of secondary molybdate phase during vitrification of PUREX wastes in liquid-fed ceramic melter

ABSTRACT

In order to develop a glass production method that inhibits formation of the Mo-bearing secondary phase, the so-called yellow phase (YP), and also to clarify its formation behavior, vitrification tests using a small-scale liquid-fed ceramic melter (LFCM) were conducted. Chemically simulated PUREX liquid waste containing Na, Mo and other fission elements was fed into a molten glass pool in the melter together with several sizes of feed glass. When the glass beads with a diameter of around 2 mm were fed, some YP was contained in the vitrified glass products at 25 wt% waste loading. While, almost no YP was detected in the glass products when glass powder with a diameter of less than 63 μm was used. The microscopic analysis of the cold-cap samples revealed that powderization of the feed glass contributed to the facilitation of Na dissolution to the feed glass in the cold-cap. This quick intake of Na to the feed glass prevented the formation of liquid Na₂MoO₄ aggregation and provided homogeneous Mo dispersion in the cold-cap with forms of alkali earth and/or rare earth molybdates. The homogeneous dispersion of Mo resulted in the fast and complete dissolution of Mo in the glass melt.     

Identification of factors that accelerate hydrogen production by Clostridium butyricum RAK25832 using casamino acids as a nitrogen source

The ability of Clostridium butyricum RAK25832 to use casamino acids as a nitrogen source was investigated. Strain RAK25832 showed the capacity to utilize different types of carbon sources. With glucose as a carbon source (10 g/L), the preferred final concentration of casamino acids was 26.67 g/L, with a cumulative hydrogen production, production rate, and yield of 2505 mL H₂/L, 160 mL/h, and 1.81 mol H₂/mol glucose, respectively. Eighteen metal elements were screened to identify the most important metals for biohydrogen production, and four elements were optimized. The optimal medium composition was MgCl₂·6H₂O (0.1 g/L), K₂HPO₄·3H₂O (6.67 g/L), NaHCO₃ (2.6 g/L), and FeCl₂·4H₂O (0.002 g/L). Vitamin supplementation of the medium showed no significant effect on hydrogen production. Under the optimized conditions, cumulative hydrogen production reached 3074 mL H₂/L. This is the first study to demonstrate the use of casamino acids as a nitrogen source by C. butyricum.     

Motion control of underactuated linkage robot based on gymnastic skill

In this paper, a reproduction of a swing‐up and a giant swing motion of underactuated robots based on technique of the horizontal bar gymnast is discussed with focusing on an equivalent center of mass (ECM) of underactuated robots and the gymnast. At first, the behaviors of the ECM of the gymnast (ECMG) are analyzed by using a motion capturing technique and an efficient motion of the ECMG for the swing‐up and for the giant swing motion are identified from analysis results, respectively. Next, a partial linearization method, which can realize that the ECM of the Acrobot (ECMA) replicates this efficient motion, is designed and reproduces the underactuated robots the swing‐up and giant swing motion like the gymnast. Finally, an effectiveness of the proposed controller is shown by numerical simulations.     

ISHIGAKI Retrieval System Using 3D Shape Matching and Combinatorial Optimization

International Journal of Computer Vision - In April 2016, a massive earthquake with a magnitude of 7.3 struck Kumamoto region, Japan, causing major devastation. One of the structures that were...     

Absolute Configuration of β- and α-Asymmetric Carbons within β-O-4-Structures in Hardwood Lignin

In this study, we investigated the proportion of erythro- and threo-forms of β-O-4-ether structures and their enantiomeric compositions in hardwood lignin by applying the ozonation method to birch wood meal. Optical activity was not substantially observed in either the erythronic or threonic acids obtained as the ozonation products of β-O-4-structures in birch wood meal. The proportions of the four stereoisomeric forms {(αS,βR)-erythro, (αR,βR)-threo, (αS,βS)-threo, and (αR,βS)-erythro forms} were estimated to be 37-38%, 13-14%, 12-13%, and 36-37% based on the yields of erythronic and threonic acids, and on their optical activities. The proportions suggest that the entire components of β-O-4-ether structures in birch wood lignin have R- and S-configurations at the β-carbon in approximately the same quantities {(βR)-β-O-4-structure: (βS)-β-O-4-structure = 50–52:48–50}; i.e., that the β-ether structures are essentially racemic. This estimation implies that, during lignin biosynthesis, an equal number of enantiomeric forms of β-O-4-bonded quinone methides were formed by radical coupling reactions.