Technical review: Improvement of mechanical properties and suitability towards armor applications – Alumina composites

Ceramic Matrix Composites (CMCs) have many interesting properties, mainly light weight, cost efficiency, low density, high compressive strength, high hardness and durability. Hence, they emerged as a boon to the development of personnel armors in the past. The current work aims to review various new methodologies adapted for the reinforcement of Alumina (Al₂O₃) CMCs in recent times, including some of the interesting results obtained with respect to mechanical properties, suitability of the synthesized composites for armor applications, and the upcoming reinforcement trends. Finally, studies related to reinforcement in Al₂O₃ CMCs, specifically towards armor applications have been consolidated to arrive at some of the important inferences for concluding reasonably.     

Effect of heat treatment and zircon addition on the properties of low-cement castables based on recycled alumina grog

In this investigation, low-cement castables were prepared using 70% alumina grog aggregates obtained from crushed alumina brick waste. The aggregates were thermally treated at 1550 °C for 3 h. Four types of low-cement castables were prepared with various types of aggregates (alumina grog with or without thermal treatment) and fillers (with or without zircon addition), and they were evaluated in terms of their physical, thermal, and chemical properties. Microstructural analysis via scanning electron microscopy (SEM) was performed on the castables before and after slag attack. Compared to the other fabricated castables, the thermally treated alumina grog castables with zircon showed better physical properties, such as a higher bulk density, cold crushing strength, and modulus of rupture and a lower apparent porosity and water absorption. In addition, they had a higher positive linear thermal expansion, refractoriness under load, permanent linear change, and hot modulus of rupture. The results of the SEM with energy dispersive X-ray analysis of the prepared castables confirmed that the mullite and anorthite phases were predominant when zircon was not added and the zircon–mullite phase additionally appeared upon the incorporation of zircon. A quantitative elemental analysis via X-ray fluorescence spectroscopy was employed to determine the composition of the castables. X-ray diffraction analysis showed that the alumina grog castables had a high mullite and low anorthite content, and the thermally treated alumina grog had a high anorthite, low mullite, and high zircon content. The improvement in the mechanical and thermo-mechanical properties of the castables with thermally treated alumina grog and added zircon can be attributed to the formation of the zircon–mullite phase with a low mullite phase content.     

Dysprosium doped copper oxide (Cu1-xDyxO) nanoparticles enabled bifunctional electrode for overall water splitting

The production of hydrogen, a favourable alternative to an unsustainable fossil fuel remains as a significant hurdle with the pertaining challenge in the design of proficient, highly productive and sustainable electrocatalyst for both oxygen evolution reaction (OER) and hydrogen evolution reaction (HER). Herein, the dysprosium (Dy) doped copper oxide (Cu_1-xDy_xO) nanoparticles were synthesized via solution combustion technique and utilized as a non-noble metal based bi-functional electrocatalyst for overall water splitting. Due to the improved surface to volume ratio and conductivity, the optimized Cu_1-xDy_xO (x = 0.01, 0.02) electrocatalysts exhibited impressive HER and OER performance respectively in 1 M KOH delivering a current density of 10 mAcm^?2 at a potential of ?0.18 V vs RHE for HER and 1.53 V vs RHE for OER. Moreover, the Dy doped CuO electrocatalyst used as a bi-functional catalyst for overall water splitting achieved a potential of 1.56 V at a current density 10 mAcm^?2 and relatively high current density of 66 mAcm^?2 at a peak potential of 2 V. A long term stability of 24 h was achieved for a cell voltage of 2.2 V at a constant current density of 30 mAcm^?2 with only 10% of the initial current loss. This showcases the accumulative opportunity of dysprosium as a dopant in CuO nanoparticles for fabricating a highly effective and low-cost bi-functional electrocatalyst for overall water splitting.     

Enumeration of stereo,position and chiral isomers of polysubstituted giant fullerenes: applications to C180 and C240

Abstract

We have developed combinatorial generation function methods that combine M?bius inversion and character cycle indices for the enumeration of stereo, position and chiral isomers of icosahedral giant fullerenes C₁₈₀ and C₂₄₀. Techniques are also developed for the machine perception of symmetries of especially giant fullerenes. The techniques yield, symmetries, position, stereo and chiral isomers of giant fullerenes which we illustrate with applications to icosahedral C₁₈₀(I_h), and C₂₄₀(I_h). We have obtained combinatorial tables for the isomers of C₁₈₀X_k and C₂₄₀X_k. Our results point to errors in previous computations on C₂₄₀ permutations. We have also outlined applications to NMR and ESR spectroscopy.     

Traffic video‐based intelligent traffic control system for smart cities using modified ant colony optimizer

Road traffic congestion is a serious problem in today's world and it happens because of urbanization and population growth. The traffic reduces the transport efficiency in the city, increases the waiting time and travel time, and also increases the usage of fuel and air pollution. To overcome these issues this papers propose an intelligent traffic control system using the Internet of Vehicles (IoV). The vehicles or nodes present in the IoV can communicate between themselves. This technique helps in determining the traffic intensity and the best route to reach the destination. The area of study used in this paper is Vellore city in Tamilnadu, India. The city map is separated into many segments of equal size and Ant Colony Algorithm (AOC) is applied to the separated maps to find the optimal route to reach the destination. Further, Support Vector Machine (SVM) is used to calculate the traffic density and to model the heavy traffic. The proposed algorithm performs better in finding the optimal route when compared to that of the existing path selection algorithms. From the results, it is evident that the proposed IoV‐based route selection method provides better performance.     

Role of Zinc (Zn) in Human Reproduction: A Journey from Initial Spermatogenesis to Childbirth

Zinc (Zn), the second-most necessary trace element, is abundant in the human body. The human body lacks the capacity to store Zn; hence, the dietary intake of Zn is essential for various functions and metabolism. The uptake of Zn during its transport through the body is important for proper development of the three major accessory sex glands: the testis, epididymis, and prostate. It plays key roles in the initial stages of germ cell development and spermatogenesis, sperm cell development and maturation, ejaculation, liquefaction, the binding of spermatozoa and prostasomes, capacitation, and fertilization. The prostate releases more Zn into the seminal plasma during ejaculation, and it plays a significant role in sperm release and motility. During the maternal, labor, perinatal, and neonatal periods, the part of Zn is vital. The average dietary intake of Zn is in the range of 8–12 mg/day in developing countries during the maternal period. Globally, the dietary intake of Zn varies for pregnant and lactating mothers, but the average Zn intake is in the range of 9.6–11.2 mg/day. The absence of Zn and the consequences of this have been discussed using critical evidence. The events and functions of Zn related to successful fertilization have been summarized in detail. Briefly, our current review emphasizes the role of Zn at each stage of human reproduction, from the spermatogenesis process to childbirth. The role of Zn and its supplementation in in vitro fertilization (IVF) opens opportunities for future studies on reproductive biology.     

Self-activated ‘green’ carbon nanoparticles for symmetric solid-state supercapacitors

Tuning of porosity and surface properties of nanoparticles especially on carbon-based nanomaterials, adopting a ‘greener’ or self-activation synthesis technique for electrical charge storage, is progressing. Herein, we report the self-activation of Teak wood sawdust in a nitrogen atmosphere at different activation temperatures to synthesize carbon nanoparticles. The activated carbon nanoparticles synthesized at 900 °C exhibits a maximum?~?360 m² g^?1 surface area with?~?2 nm average pore size diameter. Five electrolytes viz. KOH, KCl, Na₂SO₄, NaCl, and H₃PO₄ are used for studying the supercapacitance nature of the activated carbon nanoparticles in a 3-electrode configuration. A maximum specific capacitance of?~?208 F g^?1 @ 0.25 A g^?1 is obtained in 1 M KOH as the electrolyte. Two symmetric supercapacitors, aqueous (1 M KOH) and solid-state (PVA/KOH), are fabricated, and their performance difference is compiled. The solid-state symmetric supercapacitor performs in a wider voltage window (1.7 V) with a superior energy density of 27.1 Wh kg^?1 at a power density of 178 W kg^?1.

Graphical abstract

     

Transport and solvent sensing characteristics of styrene butadiene rubber nanocomposites containing imidazolium ionic liquid modified carbon nanotubes

Obtaining strong interfacial interaction between filler and polymer matrix is very crucial for the fabrication of polymer nanocomposites with superior performance. Present study is aimed to fabricate high performance styrene butadiene rubber (SBR) nanocomposites with imidazolium type ionic liquid modified multiwalled carbon nanotube (MWCNT). Ionic liquid facilitates the dispersion of MWCNT in rubber matrix and it is obvious from transmission electron microscopy images. Diffusion of toluene through SBR nanocomposite membranes has been investigated as a function of surface modified MWCNT (f-MWCNT) content to analyze the chain dynamics and filler-polymer interactions. O₂ gas barrier effect of nanocomposites with special reference to the filler loading is explored. The substantial improvement in the barrier effect in presence of filler interpreted on the grounds of a theoretical model describing permeability of heterogeneous systems. Finally solvent sensing characteristics of prepared nanocomposites are also analyzed and it is observed that prepared nanocomposites can be used as a flexible solvent sensor.     

Solar hydrogen generation from organic substance using earth abundant CuS–NiO heterojunction semiconductor photocatalyst

This work explores the critical role of NiO co-catalyst assembled on the surface of a CuS primary photocatalyst which effectively improves interface properties and enhances solar-to-hydrogen production by prolonging lifetime of photo-excitons generated at the CuS surface. The nanoscale CuS/NiO heterojunction is formulated using hydrothermal and wet impregnation methods. The resultant CuS/NiO composite shows optical absorbance between 380 and 780 nm region. The type-II energetic structure formed at CuS/NiO heterojunction facilitates rapid charge separation and as a result, the CuS/NiO composite exhibits 13 folds higher photocatalytic water splitting performance than CuO and NiO. The champion CuO/NiO photocatalyst is first identified by screening the catalysts using a preliminary water splitting test reaction under natural Sunlight irradiation. After the optimization of the catalyst, it was further explored for enhanced photocatalytic hydrogen production using different organic substances dispersed in water (alcohols, amine and organic acids). The champion CuS/NiO catalyst (CPN-2) exhibited the photocatalytic hydrogen production rate of 52.3 mmol h^?1.g^?1_cat in the presence of lactic acid-based aqueous electrolyte and, it is superior than hydrogen production rate obtained in the presence of other organic substances (triethanolamine, glycerol, ethylene glycol, methanol) tested under identical experimental conditions. These results indicate that the energetic structure of CuS/NiO photocatalyst is favorable for photocatalytic oxidation or reforming of lactic acid. The oxidation of lactic acid contributes both protons and electrons for enhanced hydrogen generation as well as protects CuS from photocorrosion. The modification of surface property and energetic structure of CuS photocatalyst by the NiO co-catalyst improves photogenerated charge carrier separation and in turn enhances the solar-to-hydrogen generation efficiency. The recyclability tests showed the potential of CPN-2 photocatalyst for prolonged photocatalytic hydrogen production while continuous supply of lactic acid feedstock is available.