The suppression of dark current for achieving high-performance Ga2O3 nanorod array ultraviolet photodetector

Gallium oxide (Ga₂O₃) is a promising candidate for next-generation solar-blind photodetectors (PDs) because of its large bandgap of 4.9 eV. Its single-crystal nanorod structure improves its photoelectric performance, which promotes carrier transformation and separation. However, Ga₂O₃ nanorods fabricated by the hydrothermal method have many oxygen vacancies, which largely enhance the dark current and reduce the on/off ratio of PDs, restricting application of such devices. Therefore, in this paper, dual strategies are applied to reduce the dark current of a metal–semiconductor–metal-structured Ga₂O₃ nanorod PD fabricated by the hydrothermal method. Through these dual strategies, which include annealing treatment and the application of a polymethyl methacrylate (PMMA) coating, the dark current of the PD is reduced from 1.34 × 10^?7 to 2.04 × 10^?9 A at 1 V, resulting in the on/off ratio of the PD reaching as high as 3.24 × 10⁴. Besides, the responsivity and detectivity of the device reach 1.73 A/W and 2.53 × 10¹² Jones respectively, which represents better performance than those of other reported Ga₂O₃ nanorod array PDs. Results have shown that the new strategy adopted can greatly improve the performance of Ga₂O₃-based ultraviolet photodetectors.     

Hemocompatibility,cytotoxicity, and genotoxicity of poly(methylmethacrylate)/nanohydroxyapatite nanocomposites synthesized by melt blending method

The aim of this study was to show the hemocompatibility, cytotoxicity, and genotoxicity of nanocomposites that were synthesized with different molecular weights of poly(methyl methacrylate) (PMMA) and different concentrations of nanohydroxyapatite (nHAp). Different techniques to characterize the nanocomposites were used. The cytotoxicity and genotoxic effects of the polymers and nanocomposites on human lymphocytes were determined by acid phosphatase assay, viability test, and comet assay. Moreover, hemocompatibility test was performed. It was found that all of the PMMA/nHAp nanocomposites are highly hemocompatible and biocompatible, none of the nanocomposites showed a cytotoxic effect, and nHAp addition decreased the genotoxicity.     

Hydrolytic degradation of poly(l‐lactic acid)/poly(methyl methacrylate) blends

The hydrolytic degradation of poly(l ‐lactic acid)/poly(methyl methacrylate) (PLLA/PMMA) blends was carried out by the immersion of thin films in buffer solutions (pH = 7.24) in a shaking water bath at 60 °C for 38 days. The PLA/PMMA blends (0/100; 30/70; 50/50; 70/30; 100/0) were obtained by melt blending using a Brabender internal mixer and shaped into thin films of about 150 µm in thickness. Considering that PMMA does not undergo hydrolytic degradation, that of PLLA was followed via evolution of PLA molecular weight (recorded by size exclusion chromatography), thermal parameters (differential scanning calorimetry (DSC)) and morphology of the films (scanning transmission electron microscopy). The results reveal a completely different degradation pathway of the blends depending on the polymethacrylate/polyester weight ratio. DSC data suggest that, during hydrolysis at higher PMMA content, the polyester amorphous chains, more sensitive to water, are degraded before being able to crystallize, while at higher PLLA content, the crystallization is favoured leading to a sample more resistant to hydrolysis. In other words, and quite unexpectedly, increasing the content of water‐sensitive PLLA in the PLLA/PMMA blends does not mean de facto faster hydrolytic degradation of the resulting materials. © 2018 Society of Chemical Industry     

Biocompatible electrospun tactic poly(methyl methacrylate) blend fibers

Uniform and beads free fibers of pristine syndiotactic PMMA (s-PMMA), isotactic PMMA (i-PMMA), and their blends in the ratio of s:i = 3:1, 1:1 and 1:3 were successfully prepared using the electrospinning technique. The tactic PMMA blend fibers showed unique thermal stability and glass transition temperatures compared to their pristine counterparts. An interesting endotherm peak was observed for the s:i = 1:3 electrospun fibers, which might indicate a complex formation between the two tactic PMMAs. Systematic surface functionalities study by attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR) revealed the interactions between these two tactic PMMAs. Biocompatibility of tactic PMMA and their blend fibers was first time comparably investigated using HeLa as the model mammalian cell line; an intriguing observance was first revealed that the blend fibers showed better biocompatibility than both pristine ones, though the behind mechanism is not well understood yet.     

Electroactive phases of poly(vinylidene fluoride): Determination,processing and applications

Poly(vinylidene fluoride), PVDF, and its copolymers are the family of polymers with the highest dielectric constant and electroactive response, including piezoelectric, pyroelectric and ferroelectric effects. The electroactive properties are increasingly important in a wide range of applications such as in biomedicine, energy generation and storage, monitoring and control, and include the development of sensors and actuators, separator and filtration membranes and smart scaffolds, among others. For many of these applications the polymer should be in one of its electroactive phases. This review presents the developments and summarizes the main characteristics of the electroactive phases of PVDF and copolymers, indicates the different processing strategies as well as the way in which the phase content is identified and quantified. Additionally, recent advances in the development of electroactive composites allowing novel effects, such as magnetoelectric responses, and opening new applications areas are presented. Finally, some of the more interesting potential applications and processing challenges are discussed.     

基于细乳液聚合法TiO2/PMMA纳米复合粒子的制备及其性能

采用细乳液聚合法制备了二氧化钛/聚甲基丙烯酸甲酯（TiO2/PMMA）纳米复合粒子,考察了引发剂、助乳化剂、乳化剂、单体结构和种类对TiO2/PMMA纳米复合粒子性能的影响。结果表明与十二醇和十六醇相比,十六烷（HD）更能抑制甲基丙烯酸甲酯（MMA）液滴的Ostwald熟化效应,当MMA占TiO2质量分数的60%,HD对单体质量分数的6%,可聚合乳化剂1-烯丙氧基-3-(4-壬基苯酚)-2-丙醇聚氧乙烯(10)醚硫酸铵（DNS-86）占整个体系的质量分数为2%时,制备TiO2/PMMA纳米复合粒子分散体的粒径为185nm,此时TiO2/PMMA纳米复合粒子与细乳液粒径差距较小;采用TiO2/PMMA纳米复合粒子制备白色涂料墨水的稳定性和遮盖力明显优于同等条件下TiO2所制备的涂料墨水。     

聚甲基丙烯酸甲酯/Laponite复合材料制备及表征

通过溶剂交换法将Laponite从水中转移到N,N二甲基乙酰胺(DMAC)中,辅助以超声波作用使Laponite与聚甲基丙烯酸甲酯(PMMA)溶液进行共混复合制备PMMA/Laponite复合材料,并表征其相关性能。     

On the importance of specific interface area in clay nanocomposites of PMMA filled with synthetic nano-mica

In clay nanocomposites, the specific interface area is the key factor determining potential improvements of properties. Nevertheless, in most systematic studies of nanocomposites little emphasis is put on assuring and characterizing dispersion quality. To probe the influence of dispersion quality, we compare nanocomposites filled with two layered silicates which were made by melt compounding and solution blending, respectively. Poly(methyl methacrylate) (PMMA) is chosen here as a thermoplastic model matrix which was compounded with a synthetic nano-mica (O-hect) and commercial Bentone with typical diameters of 5–7 μm and <300 nm, respectively.     

Thermal behaviour of polyethylene‐block‐poly(methyl methacrylate) block copolymer: effect of multiple heating and cooling rates versus mathematical artefact

The melting and crystallization behaviours of a polyethylene‐block‐poly(methyl methacrylate) (PE‐b‐PMMA) diblock copolymer and a PE homopolymer were investigated using multiple heating and cooling rate differential scanning calorimetry (DSC) experiments, and modelling of the crystallization kinetics and lamellar thickness distribution. This new model was first validated applying literature and experimental data. The model‐predicted morphology (n = 3.2) closely matched the spherulitic morphology (n = 3), which was determined using polarized optical microscopy. For each experimental cooling rate, the model predicted diblock copolymer crystallinity that well matched the entire DSC crystallinity curve, notably for an Avrami–Erofeev index of n = 2; and apparent crystallization activation energy that hardly varied with the cooling rates used, relative crystallinity (α), and crystallization temperature or time. This disfavours the concept of variable activation energy. The use of the right crystallization model and parameter estimation algorithm is important for addressing the mathematical artefact. Under non‐isothermal cooling, the PE‐b‐PMMA diblock copolymer, as per the model prediction, crystallized without confinement (n ≠ 1), preserving the cylindrical structure. From the characteristic shapes of the crystallization function f(α(T)) versus 1/T and crystallization rate versus α plots, the resulting T_cmax and narrow α_max range can guide the search for an appropriate crystallization model. The overall treatment illustrated in this study is not restricted to a PE homopolymer and a PE‐b‐isotactic PMMA block copolymer. It can be generally applied to crystalline homopolymers and copolymers (alternating, random and block), as well as their blends. The block copolymers and blends can be crystalline–amorphous as well as crystalline–crystalline. © 2014 Society of Chemical Industry     

Colour shift and mechanism investigation on the PMMA diffuser used in LED-based luminaires

PMMA material is widely used in LED-based luminaires due to several advantages such as excellent optical transparency, durability against radiation, surface hardness (scratch free), rigidity and strength and can be completely recycled. However, few studies have been reported on the colour shift and failure mechanisms caused by this type of material. This paper experimentally investigated PMMA materials with different aging conditions. The following conclusions could be drawn. (1) Discolouration was not observed for any sample subjected to aging of 85 °C for 5000 h, or with additional blue light irradiation for 5000 h, or with additional humidity of 85%RH for 5000 h, or even with aging of 100 °C for 3000 h. (2) The specimen subjected to aging of 150 °C for 360 h has a surface discoloration and has a significant wavelength dependent degradation in the transmission spectrum caused by oxidation. The specimen with aging of 100 °C for 3000 h has a less oxidation, although no significant transmission spectrum reduction was observed. (3) Using such aged specimen as a diffuser mounted on a LED-based luminaire, the radiant flux peak intensity in the blue light area has a more severe reduction than that in the yellow light area, which results in a reduction of the radiant flux intensity ratio of blue light to yellow light and hence induces the colour shift to yellow. The colour shift investigated is 0.005, very close to the general failure criterion of 0.007, while the lumen decay is 10.2%, far less than the failure criterion of 30%.