The effect of TiN deposition time on the field-emission performance coated on ZnO nanorod arrays

ZnO nanorod arrays (NRs) with a large number of sharp tips and uniform shapes were grown on the carbon cloth (CC) by a simple hydrothermal method. Titanium nitride (TiN) nanoparticles with various thicknesses were deposited on the ZnO NRs by magnetron sputtering to obtain ZnO/TiN core-shell arrays. Field emission (FE) performance of ZnO NRs show close dependence on TiN coating thickness. The turn-on field first decreases and then increases with increasing TiN coating thickness from 60 nm to 300 nm. The arrays with a design architecture can strike a balance between increased emission sites and limited field shielding effects. ZnO/TiN240 core-shell NRs have the lower turn-on electric field at 0.79 V/μm and the higher current densities at 9.39 mA/cm². The field enhancement factor (β) of ZnO/TiN240 is about 3.2 times that of the bare ZnO NRs. On the other hand, the electrochemical properties were improved due to the formation of core-shell heterojunction on the ZnO/TiN interface and porous structure, which makes the ion and charge transport more convenient. Hence, this work not only revealed that the ZnO/TiN core-shell structure exhibited excellent improvement in both FE and supercapacitors applications, but also that growing arrays on CC was expected to achieve flexible display.     

稀土灼烧过程温湿度场仿真分析

影响稀土灼烧工艺的因素十分复杂,关系产品质量稳定及能耗,现行工艺存在优化空间。通过剖析灼烧窑中温度和湿度分布状况,运用κ-ε双方程湍流模型、流体传热、多孔介质传热等理论,按特定组分运输模式,建立灼烧过程质量、动量和能量耦合传递数学模型。设置不同边界导入Fluent环境对数学模型进行仿真试验,完成数据处理实现工艺参数优化。结果表明所建模型能准确反映灼烧窑中温湿度场分布及变化,且最终仿真结果与实际灼烧后的产品湿度含量相符合。     

Spark plasma sintering of UO2 nanopowders: Pressure,heating rate and current effects

We analysed with different methods the densification of UO₂ nanopowders in SPS under constant heating rate (CHR) and isothermal sintering conditions. The apparent activation energy of densification in SPS (75 kJ/mol with CHR method) is significantly smaller than in conventional sintering. It is shown that this is likely not an effect of the applied current. We also observed a threshold stress at 64 MPa for the transition from pressure-insensitive sintering (stress exponent n≈0) to pressure-assisted sintering, suggesting that the contribution of the capillary stresses in such nanopowders is comparable with the typical stress applied in SPS.     

Local scour at offshore windfarm monopile foundations: A review

In this article, current research findings of local scour at offshore windfarm monopile foundations are presented. The scour mechanisms and scour depth prediction formulas under different hydrodynamic conditions are summarized, including the current-only condition, wave-only condition, combined wave-current condition, and complex dynamic condition. Furthermore, this article analyzes the influencing factors on the basis of classical equations for predicting the equilibrium scour depth under specific conditions. The weakness of existing researches and future prospects are also discussed. It is suggested that future research shall focus on physical experiments under unsteady tidal currents or other complex loadings. The computational fluid dynamics-discrete element method and artificial intelligence technique are suggested being adopted to study the scour at offshore windfarm foundations.     

一次野外重大活动饮食卫生保障的经验与借鉴

总结一次野外重大活动饮食卫生保障的针对性做法和经验，为以后遂行多样化任务提供参考。从食谱审查、从业人员卫生管理及培训、采购保管、加工制作、餐饮具消毒以及留样备检等环节严格把关，强化常态食品卫生监督；科学分析餐饮环节容易导致疫情传播的风险点，从人、物、环境和预案4个方面开展督导；针对野外食品加工及人员大规模长时间野外就餐，指导餐饮单元选址开设、做好环境卫生管理、保障加工用水及食材安全、保障运输前送环节的食品安全及人员就餐过程卫生、指导智能化餐厨设备使用。提高餐饮单位负责人及从业人员的食品安全意识；提高保障人员的卫生法律素质和专业技术能力，关注新的风险点。加强保障人员自身管理及从业人员的卫生管理，树立良好形象。     

哈尔滨典型街谷空间PM2.5分布场与绿色界面指数相关性 研究

在城市化快速进程的背景下，城市 街区PM2.5污染日益严重，本文选取哈尔滨 在不同季节的典型街谷空间，对以叶面积密 度（LA D）、叶面积指数（LAI）为实测要素 的绿色界面指数以及PM2.5浓度进行实测对 比研究。通过对实测数据的分析和挖掘，最 终得出如下结论：首先，典型街谷空间PM2.5 时段浓度呈现上午比下午平均高37.75%，冬 季比夏季高4.7倍的特征；其次，街谷空间的 灌木界面对PM2.5浓度场平均积极贡献率为 18.62%；最后，对PM2.5的衰减率与实测街 谷绿色界面的叶面积密度（LAD）与叶面积 指数（LAI）进行相关性分析，结果显示街谷 绿色界面对PM2.5浓度的衰减作用与叶面积 密度（LAD）呈显著负相关关系，与叶面积指 数（LAI）的相关性程度较弱。     

赵庄井田煤层气成藏条件研究

煤层气成藏条件研究是有效划分成藏类型或含气系统，煤层气富集高渗有利区预测、评价及优选的关键基础工作。基于赵庄井田煤层气地质条件及相关测试资料，借鉴前人研究成果，从煤生烃、煤层气储集和煤层气封盖保存条件等方面对赵庄井田煤层气成藏条件进行了研究。研究结果表明:煤中丰富的生烃物质在良好的生烃动力作用下，提高了生烃率和生烃量，为煤层气成藏提供了基础条件；煤变质程度高，促使煤中微小孔隙发育，煤层气储集能力增强和储集空间增大，有利于煤层气大量储存和富集；煤层埋深、围岩特性、构造及地下水径流等地质条件的有机匹配，为煤层气成藏提供了良好的封盖保存条件，是煤层气成藏的关键因素。     

Hydraulics and bridges: A French case study of monitoring of a bridge affected by scour

Bridges are one of the oldest types of civil engineering structures and the interaction between the transport and hydrographic networks represents a significant issue in a country such as France. Recently, various cases highlight the importance and vulnerability of civil transport works in relation to their environmental hazards, e.g. floods, and therefore the need to develop integrated observation tools and warning systems in the aim both of optimizing the management system and of increasing the knowledge on real scour processes. This paper reports on the “field approach” task of a research project aiming at improving continuous monitoring in order to follow the evolution of the scour processes of a given bridge or abutment. The first step has been to identify a pilot site, representative of scour vulnerability. After a report of the scour parameters to be monitored, the benchmark study and the choice of monitoring devices available on the market are detailed. Instrumentation, sensor adaptability, limitations (actual measurement ranges, ergonomics, energy supply limits …) and in situ implementation are then presented and discussed. Finally, preliminary measurements, post-treatments and interpretation are detailed.     

Seeing sweet and choosing sour: Compensatory effects of typeface on consumers’ choice behavior

The present research included two field studies investigating, firstly, the effects of round and angular typefaces on taste expectations and, secondly, how such expectations may have downstream effects on naturalistic consumer choice. A taste experiment conducted at a science festival asked participants (N = 125) to rate the expected and actual sweetness and sourness of beer served from plastic cups labelled with either angular or round typeface. Effects of typeface were found on both taste expectations and perceived taste, but in opposite directions; participants rated the expected sourness of a beer as higher in the round (vs. angular) typeface condition, whereas they rated perceived sourness as lower in the round compared to the angular typeface condition. A follow-up field study conducted at a beer bar tested whether different typefaces on a beer board would affect actual beer choices. Data consisted of beer transactions (N = 1,952) and included the monetary amount, and the specific style, and size of beer purchased. The results showed that average transaction amount was lower in the round (vs. angular) typeface condition, and that customers purchased more sour beer options in this condition. These findings support a crossmodal compensation account, and suggest that round typefaces could increase choices of contrasting sour products. Hence, marketers may want to consider how typefaces can either enhance or diminish certain tastes.     

Highly textured and strongly anisotropic TiB2 ceramics prepared using magnetic field alignment (9T)

Highly textured TiB₂ ceramics were prepared by slip casting an aqueous suspension in a magnetic field of 9 T, followed by sintering using Field Assisted Sintering Technology (FAST). Particle size refinement by ball milling improved both the degree of texturing and densification of the material (RD > 98 %). The sintered material exhibited a Lotgering orientation factor of 0.90, with the c-axis of TiB₂ oriented parallel to the magnetic field and FAST pressing direction. The texturing effect induced by the uniaxial pressing was negligible. The textured TiB₂ material exhibited a significant anisotropy in mechanical properties; the values of hardness and indentation elastic modulus measured along directions transverse to the c-axis of TiB₂ were 37 % and 13 % higher than the ones measured along the c-axis direction. Moreover, the specific wear rate of a surface of textured TiB₂ parallel to the field was one order of magnitude lower than a surface perpendicular to the field.