Contribution of Invariant Natural Killer T Cells to the Clearance of Pseudomonas aeruginosa from Skin Wounds

Chronic infections are considered one of the most severe problems in skin wounds, and bacteria are present in over 90% of chronic wounds. Pseudomonas aeruginosa is frequently isolated from chronic wounds and is thought to be a cause of delayed wound healing. Invariant natural killer T (iNKT) cells, unique lymphocytes with a potent regulatory ability in various inflammatory responses, accelerate the wound healing process. In the present study, we investigated the contribution of iNKT cells in the host defense against P. aeruginosa inoculation at the wound sites. We analyzed the re-epithelialization, bacterial load, accumulation of leukocytes, and production of cytokines and antimicrobial peptides. In iNKT cell–deficient (Jα18KO) mice, re-epithelialization was significantly decreased, and the number of live colonies was significantly increased, when compared with those in wild-type (WT) mice on day 7. IL-17A, and IL-22 production was significantly lower in Jα18KO mice than in WT mice on day 5. Furthermore, the administration of α-galactosylceramide (α-GalCer), a specific activator of iNKT cells, led to enhanced host protection, as shown by reduced bacterial load, and to increased production of IL-22, IL-23, and S100A9 compared that of with WT mice. These results suggest that iNKT cells promote P. aeruginosa clearance during skin wound healing.     

Surfactant effects on hydrate formation in an unstirred gas/liquid system: An experimental study using HFC-32 and sodium dodecyl sulfate

This paper deals with the effects of a surfactant additive on the formation of a clathrate hydrate in a quiescent guest-gas/liquid-water system. The paper first presents our strong suspicion against the existing hypothesis that the surfactant-micelle formation in the liquid-water phase promotes the hydrate formation. It is pointed out that the Krafft point for sodium dodecyl sulfate (SDS), a popular anionic surfactant often used in previous hydrate-forming experiments, is presumably higher than the system temperatures set in these experiments and hence that no micelles may have formed in these experiments. The paper then describes our experimental observations of the hydrate formation from a hydrofluorocarbon gas, HFC-32 (CH₂F₂), to show how the hydrate formation behavior is affected by the addition of SDS to the water when brought into contact with HFC-32. In each experiment, HFC-32 gas was continuously supplied to a rectangular chamber partially filled with a quiescent pool of water (pure water or an aqueous SDS solution) to compensate for the gas consumption due to the hydrate formation, thereby maintaining a constant pressure inside the chamber. The present experiments featured the following characteristics: (a) detailed visual observations along horizontal axes through large side windows in the test chamber, and (b) surface tension measurements of the aqueous SDS solutions with the aid of a pendant-drop device inserted in the same chamber to determine the SDS-in-water solubility, which seems to have been misunderstood as the critical micelle concentration (CMC) in some previous studies, under the hydrate-forming conditions. The former revealed that the addition of SDS to the pool-forming water results in the formation of thick, highly porous hydrate layers not only on the liquid-pool surface but also on the chamber walls above the level of the pool surface, leaving the bulk of the liquid pool free from hydrate crystals. The latter led to an important finding that the SDS concentration at which the rate of the hydrate formation peaks is slightly lower than the solubility (the false CMC). An excessive addition of SDS beyond the solubility was found to cause a decrease in the rate of hydrate formation but an increase in the final level of the water-to-hydrate conversion.     

Functional characterization and evolutionary implication of the internal 157-amino-acid sequence of an exoinulinase from Penicillium sp. strain TN-88

An extracellular exoinulinase from the filamentous fungus Penicillium sp. strain TN-88 has a 14-fold higher specific activity of 743 U/mg toward inulin than its equivalent from the Aspergillus niger strain 12 and possesses an internal 157-amino-acid sequence whose corresponding region is absent in the A. niger enzyme. On the basis of sequence alignment, the internal region D' encoding the 157-amino-acid sequence in the Penicillium exoinulinase gene inuD cDNA was inserted into the site between the nucleotides 897 and 898 of the A. niger exoinulinase gene inuE cDNA. The resultant inuE::D' fusion was expressed in the methylotrophic yeast Pichia pastoris. The K(m) value of the secreted hybrid enzyme InuE::D' for inulin hydrolysis was about 1/15 that of the A. niger InuE, whereas its k(cat) value did not differ greatly from that of the InuE. These observations indicate that the Penicillium exoinulinase has evolved by the horizontal transfer and integration of a relevant DNA segment and that the internal sequence D' functions as an additional noncatalytic inulin-affinity region.     

Effect of catch cup geometry on 3D boundary layer flow over the wafer surface in a spin coating

Recently, development of high technology has been required for the formation of thin uniform film in manufacturing processes of semiconductor as the semiconductor instruments become more sophisticated. Spin coating is usually used for spreading photoresist on a wafer surface. However, since rotating speed of the disk is very high in spin coating, the dropped photoresist scarers outward and reattaches on the film surface. A catch cup is set up outside the wafer in spin coating, and scattered photoresist mist is removed from the wafer edge by the exhaust flow generated at the gap between the wafer edge and the catch cup. In the dry process of a spin coating, it is a serious concern that the film thickness increases near the wafer edge in the case of low rotating speed. The purpose of this study is to make clear the effect of the catch cup geometry on the 3D boundary layer flow over the wafer surface and the drying rate of liquid film.     

Numerical study on particle motions in swirling flows in a cyclone separator

The purpose of this study is to establish the high-accurate prediction method of particle separation in a cyclone separator. Numerical simulation of the swirling flows in a cyclone separator is performed by using a large eddy simulation (LES) based on a Smagorinsky model. The validity of the simulation and the complicated flow characteristics are discussed by comparison with experimental results. Moreover, particle motions are treated by a Lagrangian method and are calculated with a one-way method. A performance for particle separation is predicted from the results of the particle tracing. As results of our investigation, the influences of the inserted height of the outlet pipe on the performance for particle separation of cyclone separator are shown.     

Magnetic leakage field due to sub-surface defects in ferromagnetic specimens

This paper describes analytical expressions for the magnetic leakage field of two types of internal defects: two dimensional rectangular and elliptical defects as functions of the applied magnetic field strength, the defect size and the distance below the surface. In this study, the magnetic image effects from the spatial boundary and the defect boundary are taken into consideration. That is, the leakage field of rectangular-like defects or elliptically shaped defects ‘below the surface’ are derived by using the modified dipole model and image theory. The profiles and strengths of leakage fields calculated from the proposed analytical forms are presented under various conditions and compared with experimentally measured ones.     

Development of effective detection method for Coxiella burnetii in mayonnaise by real-time PCR and investigation of C. burnetii contamination in commercial mayonnaise in Tokyo

A PCR method for the effective detection of Coxiella burnetii in commercially available mayonnaise was developed. Sample preparations were isolated from 50 g portions of each mayonnaise product by four successive extraction steps in phosphate buffer with 2.0 M NaCl. These extracts were then centrifuged at 20,000 x g for 60 min. DNA was isolated from the solution containing the precipitate with a commercial kit, and amplified quantitatively using real-time PCR that targeted the com1 region of C. burnetii. The recoveries of C. burnetii from 2 kinds of commercial mayonnaise specimens, with a baseline control of 1 x 10(7) particles of the Nine Mile phase II strain, were 85.0 +/- 6.0% and 72.0 +/- 0.4%, respectively. The determination limit of this method was 500 C. burnetii particles per 50 g of mayonnaise. The DNA specimens isolated from 50 different commercial mayonnaise samples sold in Tokyo using this method were amplified using both nested PCR and real-time PCR. No contamination by C. burnetii was detected in any of the mayonnaise samples.     

FATIGUE STRENGTH OF NON-LOAD-CARRYING FILLET WELDED JOINTS: EFFECTS OF WELD RESIDUAL STRESSES AND STRESS CONCENTRATION

The fatigue strength of non-load-carrying fillet welded joints of KE36(TMCP) steel was studied. Both residual stress measurements and fatigue tests were carried out, with the plate thickness, the plate width and the heat input being varied. Specimens given a Post Weld Heat Treatment (PWHT) were also prepared. The plate width had no effect on the fatigue strength, because it hardly affected the transverse residual stresses at the weld toe. However, the heat input influenced the transverse residual stress distribution, and a significant difference in fatigue strength due to the heat input was observed, especially when N≥ 10⁶ cycles. It was also found that PWHT removed almost all the residual stresses at the weld toe, improving the fatigue strength drastically. In this study, the values of stress concentration factor K₂ were estimated by Machida's method and it was concluded that the thickness effect resulted from a combination of both stress concentration and residual stresses with the contribution of the latter being particularly significant for N≥ 10⁶ cycles.