共查询到20条相似文献,搜索用时 125 毫秒
1.
2.
建立碳纳米管增强镁基复合材料界面弹性应力传递摩擦拔出模型,得到镁基复合材料各组分的应力和应变。考虑泊松效应和界面上摩擦应力的作用以及基于界面分离过程能量平衡和界面应变失配原则,得到界面能释放率和裂纹位移展开轮廓的表达式。分别从界面能释放率和裂纹位移展开轮廓两个方面研究复合材料性能参数对碳纳米管增强镁基复合材料断裂的影响。结果表明:界面分离长度和界面厚度较大,则复合材料的界面分离能释放率就越大;较大的界面分离长度、界面厚度、弹性模量和泊松比均对复合材料的裂纹位移展开轮廓产生较大影响;碳纳米管长径比越小,则复合材料的界面分离能释放率和裂纹位移展开轮廓越大;对界面材料的弹性模量和泊松比选择存在着最佳值。 相似文献
3.
4.
5.
据《Iron&Steelmaker》报导 ,新日铁公司和日本钢管公司分别宣布 ,计划新建普通用途的废塑料回收设备。今年 4月日本的一项环保法规要生效 ,这促进了废塑料的回收利用。日本将在全国范围内收集普通用途的废塑料 ,而有关钢铁生产企业收取处理费用。新日铁公司和日本钢管公司开发了新的工艺技术 ,将PVC (聚氯乙烯 )塑料与非氯化塑料分开 ,回收利用普通用途的废塑料。由于PVC塑料会产生对高炉有害的腐蚀性氯气 ,因此 ,难以在炼铁工艺回收利用。下面介绍新日铁公司和日本钢管公司建造的废塑料处理设备。1 新日铁公司新日… 相似文献
6.
7.
8.
李士峰 《有色金属再生与利用》2007,(12):14-16
塑料废物经过回收利用,变废为宝,使其得以减量化、无害化和资源化循环利用是大势所趋。本文介绍了世界各国废塑料回收、处理状况,分析了国内几种废塑料处理技术。 相似文献
9.
(Al2O3)p和SiCp多元增强铝基复合材料 总被引:3,自引:0,他引:3
利用Al2(SO4)3 分解反应所制备的多元增强铝基复合材料,其中Al2O3 和SiC 颗粒和基体结合良好,分解的SO3 对SiCp/ Al 复合材料熔体进行精炼、除气,试样中没有发现气孔、团聚、集聚、偏析,克服了传统搅拌铸造所带来的铸造缺陷,解决了回收利用重熔过程中的吸气、精炼问题;从而为颗粒增强铝基复合材料走向实用化打下了基础。 相似文献
10.
11.
12.
13.
扫描电镜观察显示胫骨是一种由羟基磷灰石和胶原蛋白组成的自然生物陶瓷复合材料.羟基磷灰石具有层状的微结构并且平行于骨的表面排列.观察也显示这些羟基磷灰石层又是由许多羟基磷灰石片所组成,这些羟基磷灰石片具有长而薄的形状,也以平行的方式整齐排列.基于在胫骨中观察到的羟基磷灰石片的微结构特征,通过微结构模型分析及实验,研究了羟基磷灰石片平行排列微结构的最大拔出能.结果表明,羟基磷灰石片长而薄的形状以及平行排列方式增加了其最大拔出能,进而提高了骨的断裂韧性. 相似文献
14.
15.
论述了CAD技术中参数化设计的三种建模方法,重点介绍了基于特征的参数化建模原理。在此基础上,分析机械设计中的机构结构,归纳出其零件的几何特征构成。设计了机构CAD图形库,并提出了该图形库生成步骤和人机交互界面。 相似文献
16.
采用激光辐照对FeCrAlW电弧喷涂层的组织进行致密化处理,借助扫描电镜和X衍射对涂层的组织进行了分析.测试了涂层的显微硬度.结果表明:涂层组织致密度提高,孔隙率明显降低.随着激光扫描速度的增加,涂层的显微硬度降低.在较低的扫描速度下,涂层与基体之间形成互熔区,涂层与基体之间产生良好的冶金结合. 相似文献
17.
18.
19.
C. Colinet 《Intermetallics》2003,11(11-12):1095
A large number of ab-initio calculations of energies of formation of intermetallic compounds have been performed in the last 15 years. The currently used methods are listed. The paper presents a review of the aluminium based compounds which have been studied. Comparisons of calculated and experimental enthalpies of formation are provided for aluminim-3d and-4d transition metal alloys at equiatomic composition. The modelling of the enthalpies of mixing of solid solutions based on a given lattice is described. 相似文献
20.
O. N. Vlasova N. N. Korneeva V. I. Eremenko O. Kh. Fatkullin N. M. Semenova S. N. Petrova D. D. Vaulin 《Metal Science and Heat Treatment》1991,33(12):924-931
Conclusions To provide a high level of mechanical properties in wrought blanks of cast ÉP741NP and ÉP962 alloys it is necessary to form controlled structures. A necklace-type structure formed in homogenizing isostatic treatment, subsequent thermomechanical working including alternation of the operations of deformation in the (+)-area and recrystallization anneals, and final heat treatment is preferable. The temperature conditions of all stages of thermomechanical working are strictly controlled, especially the final operation of deformation and heating for hardening. To eliminate hardening cracks and distortions it is necessary to use molten salts at t=600°C as quenchants. The use of multiple production operations makes it possible to significantly reduce the structural inhomogeneity related to inhertance of the original dendritic structure. However, the structure of the final semifinished product is nevertheless characterized by a difference in occurrence of the processes of polygonization and recrystallization between the former dendritic cells and the interdendritic spaces in deformation and heat treatment.To obtain structurally homogeneous blanks for gas turbine engine parts it is necessary to use basically new methods of remelting such as vacuum double electrode remelting and electron beam remelting with an intermediate vessel.Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 12, pp. 25–29, December, 1991. 相似文献