共查询到20条相似文献,搜索用时 46 毫秒
1.
2.
刘文斐 《电气电子教学学报》2014,(5):108-110
本文提出了"数字信号处理"课程教学的探究式的教学模式,并在教学过程中利用Matlab辅助探究式教学进行课堂设计。文中结合IIR数字滤波器的设计这一教学实例详细论述了如何利用Matlab开展探究式的教学。这种教学模式的应用对教学效果和学生学习积极性的提高有十分显著的作用。 相似文献
3.
闫润 《电气电子教学学报》2018,(1):67-70
本文论述了"教学做合一"的理论基础,结合信息化教学构建了基于"教学做合一"理论的"电工电子学"课程教学模式,探索了这一教学模式遵循的原则、基本内容以及具体教法,最后论述了在我校的实践效果.实践表明该模式对提高高职学生电工电子课程的实践能力可以收到明显的效果. 相似文献
4.
翻转课堂是一种新型的教学形态,是应新课程标准的要求利用moodle网络课程管理系统施行的一种教学模式,在这一教学模式下教师和学生可以通过测验、讨论、投票、反馈等互动方式进行模块化的知识学习,本文从翻转课堂的角度出发,结合高中信息技术教学实际,对基于翻转课堂的高中信息技术技术教学进行深入的研究和探讨。 相似文献
5.
传统的单片机课程教学模式主要以教材或老师为中心,这两种教学模式在实际实施过程中存在诸多问题,教学效果差,学生积极性不高,学生总是处在被动状态接受知识,全新的教学模式提倡要以学生为中心,在教学过程中要根据不同的教学内容进行适合学生学习的教学设计。教学做一体化教学模式,是一种全新的教学模式,它通过理论与实践的完美结合,突出了技能训练,可以充分发挥学生的主体作用,有效地培养学生的动手创新能力,培养学生综合运用所学知识的能力,达到高职高专培养应用型人才的目的。 相似文献
6.
《网上开店》是电子商务专业的一门专业核心课程,近年来许多高职院校纷纷心不同形式开设了这门课程,并把这门本课定为专业核心课。对本课程的教学也都还处于探索阶段,没有特别成熟的课程体系的教学模式。本文分析了课程的定位和课程目标,并结合高职学生的培养目标及网上开店的特点,对该课程进行了课程模块、课程项目及教学模式进行了初步设计。 相似文献
7.
结合教学实践,阐述了立体化教学模式的基本情况,列举了其基本的研究方法和具体实施条件,结合教学实践,对移动互联网的高职教学模式进行了研究,并在立体化教学模式、学习体系、资源建设、学习途径和取得的主要成就等方面进行了概括总结,在产体化教学模式方面取得了一定成绩,为相关专业的高职教学及人才培养方面提供了有益的参考。 相似文献
8.
9.
10.
11.
Meihua Shen Wilfred Pau Nicolas Gani Jianping Wen Shashank Deshmukh Thorsten Lill Jian Zhang Hanming Wu Guqing Xing 《半导体技术》2004,29(8)
This paper presents a brief overview of the Applied Centura(R)DPS(R)system,configured with silicon etch DPS Ⅱ chamber, with emphasis on discussing tuning capability for CD uniformity control. It also presents the studies of etch process chemistry and film integration impact for an overall successful gate patterning development. Discussions will focus on resolutions to key issues, such as CD uniformity, line-edge roughness, and multilayer film etching integration. 相似文献
12.
White organic light-emitting devices based on fac tris(2- phenylpyridine) iridium sensitized 5,6,11,12-tetraphenylnap -hthacene 总被引:1,自引:0,他引:1
We have fabricated the white organic light-emitting devices (WOLEDs) based on 4,4' -bis(2,2 -diphenyl vinyl)-1,1' - biphenyl (DPVBi) and phosphorescence sensitized 5,6,11,12,-tetraphenylnaphthacene (rubrene). The device structure is ITO/2T-NATA (20 nm)/NPBX (20 nm)/CBP: x%Ir(ppy)3:0.5% rubrene (8 nm)/NPBX (5 nm)/DPVBi (30 nm)/Alq(30 nm)/LiF(0.5 nm)/A1. In the devices, DPVBi acts as a blue light-emitting layer, the rubrene is sensitized by a phosphorescent material, fac tris (2-phenylpyridine) iridium [Ir(ppy)3], acts as a yellow light-emitting layer, and N,N' -bis- (1-naphthyl)- N,N' -diphenyl -1, 1' -biphenyl-4,4' -diamine (NPBX) acts as a hole transporting and exciton blocker layer, respectively. When the concentration of Ir (PPY)3 is 6wt%, the maximum luminance is 24960 cd/m^2 at an applied voltage of 15 V, and the maximum luminous efficiency is 5.17 cd/A at an applied voltage of 8 V. 相似文献
13.
Complete approach to automatic identification and subpixel center location for ellipse feature 总被引:1,自引:0,他引:1
XUE Ting WU Bin SUN Mei YE Sheng-hua 《光电子快报》2008,4(1):51-54
To meet the need of automatic image features extraction with high precision in visual inspection, a complete approach to automatic identification and sub-pixel center location for similar-ellipse feature is proposed. In the method, the feature area is identified automatically based on the edge attribute, and the sub-pixel center location is accomplished with the leastsquare algorithm. It shows that the method is valid, practical, and has high precision by experiment. Meanwhile this method can meet the need of instrumentation of visual inspection because of easy realization and without man-machine interaction. 相似文献
14.
15.
In order to diagnose the laser-produced plasmas, a focusing curved crystal spectrometer has been developed for measuring the X-ray lines radiated from a laser-produced plasmas. The design is based on the fact that the ray emitted from a source located at one focus of an ellipse will converge on the other focus by the reflection of the elliptical surface. The focal length and the eccentricity of the ellipse are 1350 mm and 0.9586, respectively. The spectrometer can be used to measure the X- ray lines in the wavelength range of 0.2-0.37 nm, and a LiF crystal (200) (2d = 0.4027 nm) is used as dispersive element covering Bragg angle from 30° to 67.5°. The spectrometer was tested on Shengnang- Ⅱ which can deliver laser energy of 60-80 J/pulse and the laser wavelength is 0.35 μm. Photographs of spectra including the 1 s2p ^1P1-1s^2 ^1S0 resonance line(w), the 1s2p ^3P2-1s^2 1S0 magnetic quadrupole line(x), the 1s2p ^3P1-1 s^2 ^1S0 intercombination lines(y), the 1 s2p ^3S~1-1 s^2 ^1S0 forbidden line(z) in helium-like Ti Ⅹ Ⅺ and the 1 s2s2p ^2P3/2-1 s622s ^2S1/2 line(q) in lithium-like Ti Ⅹ Ⅹhave been recorded with a X-ray CCD camera. The experimental result shows that the wavelength resolution(λ/△ 2) is above 1000 and the elliptical crystal spectrometer is suitable for X-ray spectroscopy. 相似文献
16.
High purity organic-tantalum precursors for thin film ALD TaN were synthesized and characterized.Vapor pressure and thermal stability of these precursors were studied.From the vapor pressure analysis,it was found that TBTEMT has a higher vapor pressure than any other published liquid TaN precursor,including TBTDET,TAITMATA,and IPTDET.Thermal stability of the alkyl groups on the precursors was investigated using a 1H NMR technique.The results indicated that the tertbutylimino group is the most stable group on TBTDET and TBTEMT as compared to the dialkylamido groups.Thermal stability of TaN precursors decreased in the following order:TBTDET > PDMAT > TBTEMT.In conclusion,precursor vapor pressure and thermal stability were tuned by making slight variations in the ligand sphere around the metal center. 相似文献
17.
This paper reviews our recent development of the use of the large-scale pseudopotential method to calculate the electronic structure of semiconductor nanocrystals, such as quantum dots and wires, which often contain tens of thousands of atoms. The calculated size-dependent exciton energies and absorption spectra of quantum dots and wires are in good agreement with experiments. We show that the electronic structure of a nanocrystal can be tuned not only by its size,but also by its shape. Finally,we show that defect properties in quantum dots can be significantly different from those in bulk semiconductors. 相似文献
18.
Credence Systems Corporation 《半导体技术》2004,29(9)
Integrated circuits (ICs) intended for increasingly sophisticated automotive applications bring unique test demands. Advanced ICs for applications such as highly integrated automatic braking system (ABS) and airbag controllers combine high voltage digital channels, significant VI demands and precise timing capability. Along with continued missioncritical reliability concerns, the trend toward higher voltage operation and increased device integration requires specialized test capabilities able to extend across the wide operating ranges found in automotive applications. Among these capabilities, automotive test requirements increasingly dictate a need for a cost-effective versatile mixed-signal pin electronics with very high data rates reaching up to 50MHz with a voltage swing of-2 V to +28 V. 相似文献
19.
YUXiao-hua XIANGYu-qun 《半导体技术》2005,30(2):30-32,37
An improving utilization and efficiency of critical equipments in semiconductor wafer fabrication facilities are concerned. Semiconductor manufacturing FAB is one of the most complicated and cost sensitive environments. A good dispatching tool will make big difference in equipment utilization and FAB output as a whole. The equipment in this paper is In-Line DUV Scanner. There are many factors impacting utilization and output on this equipment group. In HMP environment one of the issues is changing of reticule in this area and idle counts due to load unbalance between equipments. Here we'll introduce a rule-based RTD system which aiming at decreasing the number of recipe change and idle counts among a group of scanner equipment in a high-mixed-products FAB. 相似文献
20.
It is of interest to get appropriate information about the dynamic behaviour of rotating machinery parts in service. This paper presents an approach of optical vibration and deviation measurement of such parts. Essential of this method is an image derotator combined with a high speed camera or a laser doppler vibrometer (LDV). 相似文献