共查询到20条相似文献,搜索用时 484 毫秒
1.
2.
研究模拟电路故障诊断准确性问题.电路故障与引起故障因素之间呈高度非线性,传统故障识别方法无法识别其非线性特点,导致传统故障方法的诊断精度低.为了提高电路故障诊断的精度,提出一种遗传算法优化BP神经算法的模拟电路故障诊断方法.首先对故障电路样本进行特征提取和归-化处理,然后采用遗传算法对BP神经网络参数进行优化,最后利用最优参数BP神经网络对电路故障样本进行训练和建模,获得电路故障诊断结果.在MATLAB平台上对模拟电路故障进行仿真测试,仿真结果表明,与传统模拟电路故障诊断方法相比,提高了模拟电路故障诊断精度,缩短了故障诊断时间,在模拟电路故障中有着广泛的应用前景. 相似文献
3.
针对传统BP神经网络在模拟电路故障诊断中存在的不足,提出遗传算法和BP神经网络相结合的遗传神经网络模拟电路故障诊断方法;充分利用遗传算法全局、并行寻优的能力对BP神经网络的学习过程进行优化,防止神经网络训练时出现收敛速度慢和陷入局部极小等缺陷;在MATLAB平台上编程实现模拟电路故障诊断的仿真实验;仿真结果表明,相对于传统的BP神经网络算法,遗传神经网络算法不仅提高了网络训练收敛速度,而且提高了模拟电路故障诊断平均正确率,为模拟电路智能化诊断提供一种新的思路。 相似文献
4.
针对目前人工神经网络在模拟电路故障诊断中的应用对样本的依赖性较强及经验模态分解突出了信号的局部特征、可以更准确有效地把握原信号数据特征信息的特点,提出了模拟电路故障诊断的经验模态分解预处理方法;文中详细地阐述了希尔伯特变换的具体方法、模拟电路故障诊断的神经网络方法;并举例说明诊断系统的具体实现方法;仿真结果表明,在相同的精度要求下,该算法的训练时间远小于普通的神经网络,对模拟电路的故障诊断有一定的实际意义。 相似文献
5.
6.
7.
8.
基于神经网络的数模混合电路故障诊断模型设计 总被引:3,自引:3,他引:0
神经网络是智能故障诊断中运用最为广泛的诊断方法之一,能应对复杂数字电路和模拟电路故障诊断;基于VC++的神经网络诊断系统具有运算速度快、输入输出界面丰富、易于实现在线故障诊断等特点,而Matlab提供强大的神经网络工具箱,在网络训练方面有优势;利用参数文件将二者优势结合起来,可实现功能完善的数模混合电路智能故障诊断系统;诊断实例表明,使用该方法实现数模混合电路故障诊断系统,具有高建模速度和高诊断精度的特点。 相似文献
9.
小波神经网络在模拟电路故障诊断中的应用 总被引:1,自引:0,他引:1
研究模拟电路优化问题,电路系统存在非线性和漂移会引起系统故障.针对BP神经网络在模拟电路故障诊断上存在的收敛速度慢、易陷入局部最小等不足,为解决上述问题,提出基于小波神经网络的模拟电路故障诊断方法.采用正弦信号仿真模拟电路,应用小波变换对模拟电路响应的采样信号进行故障特征提取,建立故障字典,利用神经网络对各种状态下的特征向量进行分类决策,实现模拟电路的故障诊断.故障诊断仿真表明,保证较高故障诊断正确率RBF网络的训练次数得到了极大地缩小,极大地提高了模拟电路故障诊断的效率,为设计提供了依据. 相似文献
10.
11.
基于神经网络的大规模模拟电路故障检测系统 总被引:4,自引:2,他引:4
设计了一个基于小波和神经网络的信号处理系统,该系统主要针对大规模模拟电路故障检测。针对传统诊断技术的局限性,讨论了利用神经网络方法分级诊断大规模模拟电路软故障的方案,通过小波变换提取故障特征,并利用神经网络的非线性映射特性逼近故障诊断模型。诊断结果表明基于人工神经网络的电路故障诊断方法是行之有效的。此方法具有广阔的应用前景,为大规模模拟电路故障诊断提供了新的理论依据和检测方法,并有希望研制成一套高效的检测设备。 相似文献
12.
13.
为了提高径向基神经网络(radial basis funtion neural network,RBFNN)进行模拟电路故障诊断的速度与准确性,提出了一种基于粒子群算法(particle swarm optimization,PSO)优化RBFNN的故障诊断方法。该方法利用PSO优化RBFNN的结构参数,克服了神经网络中模型结构和参数难以设置的缺点,避免了参数选择的盲目性;同时对模拟电路的响应信号采用小波包分解,提取有效故障特征。仿真结果表明,方法具有更高的诊断精度和更快的收敛速度,能有效地实施模拟电路的故障定位。 相似文献
14.
针对控制系统中模拟电路故障诊断时的不确定性问题,提出了将模糊理论和神经网络相结合的方法;首先利用模糊理论描述不确定性信息,然后利用人工神经网络完成不确定性推理,最后利用模糊理论对推理结果进行解释和决策,从而得出故障诊断结论;结合某型船舶主机遥控系统中延时电路板的故障诊断问题,阐述了将该方法应用于实际控制系统的故障诊断过程;结果表明,该方法能够较好地处理模拟电路故障诊断过程中的不确定性问题,有效地提高故障模式的识别能力,将故障准确地定位到元器件. 相似文献
15.
16.
Fault diagnosis of analog circuits is a key problem in the theory of circuit networks and has been investigated by many researchers in recent decades. In this paper, an active filter circuit is used as the circuit under test (CUT) and is simulated in both fault-free and faulty conditions. A modular neural network model is proposed in this paper for soft fault diagnosis of the CUT. To optimize the structure of neural network modules in the proposed scheme, particle swarm optimization (PSO) algorithm is used to determine the number of hidden layer nodes of neural network modules. In addition, the output weight optimization–hidden weight optimization (OWO-HWO) training algorithm is employed, instead of conventional output weight optimization–backpropagation (OWO-BP) algorithm, to improve convergence speed in training of the neural network modules in proposed modular model. The performance of the proposed method is compared to that of monolithic multilayer perceptrons (MLPs) trained by OWO-BP and OWO-HWO algorithms, K-nearest neighbor (KNN) classifier and a related system with the same CUT. Experimental results show that the PSO-optimized modular neural network model which is trained by the OWO-HWO algorithm offers higher correct fault location rate in analog circuit fault diagnosis application as compared to the classic and monolithic investigated neural models. 相似文献
17.
提出了一种新颖的基于多小波神经网络的模拟电路故障诊断方法。介绍了多小波的原理,分析了多小波神经网络的结构、逼近性质及多小波神经网络的算法,提出了用多小波来处理故障信号,提取故障特征向量输入给神经网络,从而进行模拟电路故障诊断。由于多小波函数具有连续、对称性及支撑集短等一系列优点,所以用多小波神经网络来进行模拟电路故障诊断比一般的小波神经网络具有诊断精度高、诊断速度快的优点。给出了仿真诊断实例,验证了该方法的有效性。 相似文献
18.
动态电源电流测试(IDDT )对模拟电路故障诊断非常有效。针对小波神经网络在模拟电路IDDT故障诊断中存在的缺陷,提出了一种基于多小波变换的模拟电路IDDT故障诊断方法。即利用多小波变换提取电源电流各频段的能量,作为神经网络的输入特征向量进行故障诊断。仿真结果表明,该方法是有效的,而且比小波神经网络方法的收敛速率快。 相似文献
19.
An expert system for fault diagnosis in internal combustion engines using probability neural network
Jian-Da Wu Peng-Hsin Chiang Yo-Wei Chang Yao-jung Shiao 《Expert systems with applications》2008,34(4):2704-2713
An expert system for fault diagnosis in internal combustion engines using adaptive order tracking technique and artificial neural networks is presented in this paper. The proposed system can be divided into two parts. In the first stage, the engine sound emission signals are recorded and treated as the tracking of frequency-varying bandpass signals. Ordered amplitudes can be calculated with a high-resolution adaptive filter algorithm. The vital features of signals with various fault conditions are obtained and displayed clearly by order figures. Then the sound energy diagram is utilized to normalize the features and reduce computation quantity. In the second stage, the artificial neural network is used to train the signal features and engine fault conditions. In order to verify the effect of the proposed probability neural network (PNN) in fault diagnosis, two conventional neural networks that included the back-propagation (BP) network and radial-basic function (RBF) network are compared with the proposed PNN network. The experimental results indicated that the proposed PNN network achieved the best performance in the present fault diagnosis system. 相似文献
20.
动态电源电流测试(IDDT)对模拟电路故障诊断非常有效。针对小波神经网络在模拟电路IDDT故障诊断中存在的缺陷,提吐了一种基于多小波变换的模拟电路IDDT故障诊断方法。即利用多小波变换提取电源电流各频段的能量,作为神经网络的输入特盘向量进行故障诊断。仿真结果表明,该方法是有效的,而且比小波神经网络方法的收敛速率快。 相似文献