ZnO薄膜的p型掺杂研究进展

ZnO作为重要的第三代半导体材料在光电领域具有广泛的应用前景因而引起越来越多的关注,ZnO薄膜的p型掺杂是实现ZnO基光电器件的关键,也是ZnO材料的主要研究课题.本文论述了ZnO薄膜P型转变的难点及其解决方法,概述了ZnO薄膜p型掺杂的研究现状,提出了有待进一步研究的问题.     

p型ZnO掺杂及其发光器件研究进展与展望

ZnO是一种新型的Ⅱ-Ⅵ族宽带隙半导体,具有很多优异的的光电性能.但一般制备出的ZnO薄膜材料均是n型,很难实现p型的掺杂.ZnO的p型掺杂是实现其光电器件应用的关键技术,也是目前ZnO研究的关键课题.目前在p型ZnO的掺杂理论和实验方面都有很大的进展,对此进行了详细的分析与论述,并且展望了p型ZnO薄膜制备的前景.     

ZnO薄膜V族掺杂的研究进展

ZnO薄膜作为第三代半导体功能材料,高质量的p型掺杂是基于光电器件应用的关键.概述了ZnO薄膜V族元素氮、磷、砷(N、P、As)p型掺杂的研究进展,分析对比了3种元素的掺杂和p型转变特性,简单介绍了共掺杂技术,提出了有待进一步研究的问题.     

银掺杂ZnO薄膜光电功能材料的研究进展

近年来人们发现利用银掺杂方案能制备出导电性良好的p型ZnO薄膜,并能增强ZnO的紫外发光强度,还可以形成各种纳米微结构从而产生一些新的特性.这很可能为ZnO基光电器件的应用提供新思路.综述了几年来国内外在银掺杂ZnO薄膜的电学性质、光学性质和结构方面的研究进展,并探讨了目前存在的问题及今后研究的方向.     

p型ZnO薄膜研究进展

ZnO薄膜是一种应用广泛的半导体材料.近几年来,随着对ZnO的光电性质及其在光电器件方面应用的开发研究,ZnO薄膜成为研究热点之一.制备掺杂的p型ZnO是形成同质p-n结以及实现其实际应用的重要途径.近来已在p型ZnO及其同质结发光二极管(LED s)研究方面取得了较大的进展.目前报道的p型ZnO薄膜的电阻率已降至10-3Ω.cm量级.得到了具有较好非线性伏安特性的ZnO同质p-n结和紫外发光LED.本文就其最新进展进行了综述.     

ZnO薄膜p型掺杂的研究进展

ZnO薄膜作为一种多功能半导体材料,近年来一直受到广泛关注.然而,如何制备高质量的p型ZnO薄膜是实现其实用化的关键.概括了p型掺杂困难的原因,并指出Ⅲ-Ⅴ族元素共掺杂可能是p型掺杂的最好方法.简单回顾了ZnO薄膜p型掺杂的研究现状,并对今后的发展趋势进行了展望.     

p型掺杂ZnO薄膜的研究进展

近年来,随着对ZnO的光电性质及其在光电领域应用的开发研究,制备可靠稳定的低阻p型ZnO薄膜成为研究热点之一。本文论述了p型ZnO薄膜制备的难点及其解决方法,综述了其最新研究进展,并对p型ZnO的研究进行了展望。     

ZnO薄膜p型掺杂的研究进展

ZnO薄膜作为一种多功能半导体材料，近年来一直受到广泛关注。然而，如何制备高质量的p型ZnO薄膜是实现其实用化的关键。概括了p型掺杂困难的原因，并指出Ⅲ-Ⅴ族元素共掺杂可能是p型掺杂的最好方法。简单回顾了ZnO薄膜p型掺杂的研究现状，并对今后的发展趋势进行了展望。     

N-X共掺p型ZnO薄膜的研究进展

获得高质量稳定的p型ZnO薄膜是实现ZnO基光电器件化的关键.目前,国际上公认V族元素中的N替代O位(No)是实现p型ZnO较理想的掺杂途径.但p-ZnO:N薄膜的导电性能会随着时间、光照、温度条件发生变化,稳定性不足.大量的理论和实验研究表明N基二元共掺( N-X)可以提高N在ZnO薄膜中的固溶度,浅化N的受主能级,且在很大程度上能够改善p型ZnO的导电性能,有利于获得稳定的p型ZnO薄膜.为此,从N基施主受主共掺、双受主共掺以及其它共掺方面综述了N-X共掺p型ZnO薄膜的研究现状.     

掺杂ZnO薄膜的研究现状

ZnO薄膜的性质取决于不同的掺杂元素和不同的制备工艺.概述了掺杂ZnO薄膜的研究现状,分析了不同掺杂组分对ZnO薄膜的p型转变特性、发光特性以及铁磁性质的影响,认为稀土掺杂可能使ZnO薄膜产生新的发光特性,共掺杂技术可能是实现ZnO薄膜特性改变的新途径.     

The Research of Anti-Wear Properties of Organomolybdenum Compounds in the Engine Oils

A four-ball tester was used to evaluate the anti-wear performance of three kinds of organomolybdemun compounds in the engine oils, i. e., molybdenum dialkyldithiophosphate (MoDDP), molybdenum dialkyldithiocarbamate ( MoDTC), and sulphur and phosphorus freeorganomolybdeum (Molybdate). The results indicate that a low concentration of MoDDP doesn' t improve the anti-wear properties of the commercial engine oils, but a high concentration of MoDDP can obviously improve the anti-wear properties and the load-carrying capacity of the engine oils. MoDTC doesn' t improve the antiwear properties of the engine oils, but worsens the anti-wear properties of the oils. Signifi can timprove ment of frictional and wear characteristics is obtained with Molybdate added in the commercial engine oils and the formulated oils.     

Certification Becomes Important for the I Quality; and Safety Supervision of the Chinese Liquor Sector

The end of 2007, over 200 unit products of more than 80 Chinese firms have passed the quality grade certification for liquor products. These products involve distilled spirits, beer, wine, yellow wine, fruit syrup wine and others, and cover over 80% of the national top-branded liquor products.……     

Deposition and Coating Properties on CVD Tungsten

Surface characterization and microstructure studies are performed on chemical vapor deposited (CVD) tungsten coating. There is about 2 μm thickness diffusion layer of tungsten in the molybdenum substrate. The thermal shock test shows tungsten coating has good adhesion with molybdenum substrate, but the elements of oxygen and carbon in the tungsten coating have the bad affection to the adhesion. The result of high-temperature diffusion experiment is the diffusion rate from molybdenum substrate to tungsten coating is faster.     

Analysis of marine hydrobiont lipid extracts as possible cryoprotective agents

We studied a combined effect of the cryoprotectants both of lipid and carbohydrate origin at the presence of DMSO or without it on cell viability and the RNA synthesis in the embryonic mollusc and echinoderm cell cultures obtained at different developmental stages. Cryoprotective properties of exogenous lipids correlated with their thermotropic behavior. Lipid extracts from marine hydrobiontes, which thermal transitions are characterized by relatively small part of calorimetric thermogram area lying at temperatures above 0 °C (6–18%), were found to possess a considerable cryoprotective activity. The results are discussed in relation to the prediction of the cryoprotective activity of lipid extracts for marine animal cells. In addition, it was found that marine invertebrate cells can be cryopreserved without DMSO at the presence of trehalose and lipid extracts of some marine hydrobiontes.     

Low-Temperature Properties of Silver

Pure silver is used extensively in the preparation of high-temperature superconductor wires, tapes, films, and other configurations in which the silver not only shields the superconducting material from the surrounding materials, but also provides a degree of flexibility and strain relief, as well as stabilization and low-resistance electrical contact. Silver is relatively expensive, but at this stage of superconductor development, its unique combination of properties seems to offer the only reasonable means of achieving usable lengths of conductor. In this role, the low-temperature physical (electrical, thermal, magnetic, optical) and mechanical properties of the silver all become important. Here we present a collection of properties data extracted from the cryogenic literature and, to the extent possible, selected for reliability.     

Early ironwork in Biscay: Survey,excavation, experimentation and materials characterization. An integral study of the mountainside ironworks (ferrerías de monte or “haizeolak”)

ABSTRACT

The production of iron in Biscay (Basque Country, Spain) has been a hallmark of this territory of the North of the Iberian Peninsula throughout its history. The Archaeology team of the Basque Country Mining Museum has spent 13 years, so far, studying the origins of this activity through the evidences left at the old pre-hydraulic iron production workshops known as mountainside ironworks (ferrerías de monte) or haizeolak. It has catalogued 170 archaeometallurgical sites of this type in Biscay, and the archeological excavation of some of them has led to the knowledge of the different stages of the production process that took place in these workshops. The team has also experimentally reproduced the work carried out in a mountainside ironworks from the High Middle Ages, and it has currently started the characterization process of this type of activity through the study of the collected materials.     

Mechanism Study on the Wear of CrAlTiN Coated High-Speed Steel Twist Drills Under Dry Cutting Conditions

As demands about environment protection are growing up, dry cutting technology is getting more and more concerns from all over the world. Main works performed here are study on dry cutting performances and wear mechanisms of M2high-speed steel (HSS) twist drills with CrAlTiN multicomponent coatings, which was deposited using magnetron sputter ion plating system, in drilling 45 and 30CrMnSiA steel, and their comparisons to those in drilling the same steel but using monolayer CrN and commercial TiN coated drills. Drilling performances of drills are evaluated mainly through the measurements of width on outer corner flank land and the cutting forces. Results show that performances of CrAlTiN coated drills are better than those of monolayer CrN and TiN coated drills. In drilling 45 and 30CrMnSiA steel, the average tool life of the CrAlTiN coated drills are 17.2 and 11.8 times higher than those of the uncoated drills. Observing wear of the drill with scanning electronic microscope, results show that there is no crack or spallation of the CrAlTiN coatings in wear zones. Main mechanism of the wear here is adhesion.     

Study on Bond Ability of Arc-Spraying Coatings with Different Surface Pretreatment on Cast-Iron

Arc spraying coatings are widely used in various applications, but uncommon in cast iron substrate. Different surface pretreatment technology is tested on substrates of gray cast iron. Surface roughness and residual stress were measured by TR200 and X-ray diffraction analyzer. Influence of different surface pretreatment methods ( dry blasting and fusebond) on roughness and residual stress was analyzed. The arc-sprayed coatings of wire 3Cr13 (φ2mm) on gray cast iron substrate is studied. The microstructure and interface of bonding layer were observed by SEM. The bond strength was taken by tensile test. Results show that bond strength with grit blasting is higher than fuse-bond; it is feasible to make wire 3Cr13 coating with arc spraying on cast iron substrate roughened by grit blasting.     

Structural Characteristics of TiO2 Ceramic Coating by Micro-Plasma Oxidation

TiO2 ceramic coatings with thickness of 20 μm were formed on the surface of pure titanium by micro-plasma oxidation. Their micro-structures were investigated by by using X-ray diffraction and their surface images were detected by using scan electronic microscope. There were three kinds of TiO2 coatings, pure anatase type TiO2 phase, mixed phases consisted of rutile type TiO2 phase and anatase type TiO2 phase, pure rutile type TiO2 phase. The coating surface with the pure anatase type TiO2 phase is rough, while the coating surface with the pure rutile type TiO2phase is smooth. The upper coating surface with the mixed type TiO2 phases is anatase type TiO2 structure and the subsurface of the TiO2 coating is rutile type TiO2structure.     

Evaluation of fatigue life of steel using steel grain size

The insightful discussion of the relationship between the construction of metallographic and fatigue life and proposition of mathematical relationships describing this relationship was conducted in the paper. This paper presents a method for estimating the fatigue life, based on the construction of the microstructural material taking into account the grain size and the participation of ferrite and pearlite phase.