一起食物中毒事件中产独特肠毒素表型的金黄色葡萄球菌病原学分析

目的对一起疑似为金黄色葡萄球菌所导致的食物中毒事件进行葡萄球菌肠毒素检测,结合金黄色葡萄球菌病原学分析,为明确食物中毒诊断提供依据。方法根据流行病学调查,采用ELISA方法对可疑食物进行葡萄球菌肠毒素检测,同时对可疑食物和患者呕吐物进行金黄色葡萄球菌分离,运用Vitek2 Compact全自动细菌鉴定仪和血浆凝固酶试验鉴定为金黄色葡萄球菌,采用脉冲场凝胶电泳(PFGE)对病原菌进行同源性分析,以ELISA方法对检出的金黄色葡萄球菌菌株进行肠毒素检测,用PCR方法对肠毒素基因进行分型。结果食物和患者样品中分别分离出2和11株金黄色葡萄球菌,PCR方法及ELISA方法对肠毒素分型结果显示,其中12株同时存在SEA、SEB、SED、SEE 4种肠毒素及相关基因,PFGE聚类分析显示,其中12株产肠毒素金黄色葡萄球菌具有高度同源性。结论本起食物中毒事件为具有独特肠毒素表型的金黄色葡萄球菌导致,在金黄色葡萄球菌中毒实验室调查过程中,肠毒素检测结合病原菌溯源分析可以为相关公共卫生事件提供科学依据。     

利用简并引物检测金黄色葡萄球菌肠毒素A、B基因

通过设计简并引物建立一种PCR技术同步快速检测金黄色葡萄球菌肠毒素A和B基因的方法。根据金黄色葡萄球菌肠毒素A、B基因编码序列,设计一对特异性简并引物SEAB来扩增靶基因片段,长度分别为105bp和135bp,通过对金黄色葡萄球菌肠毒素A、B菌株和4株对照菌株进行PCR检测,评价该引物的特异性;对金黄色葡萄球菌肠毒素B的DNA系列10倍稀释,对其灵敏性进行PCR检测。结果显示,金黄色葡萄球菌肠毒素A和B菌株的DNA检测结果呈阳性,4株对照菌株的检测结果呈阴性,通过基因测序证实了PCR产物的特异性,SEB的DNA最低检测浓度为3.58ng,整个检测过程不超过20h。建立了一个特异、快速灵敏的在同一条件下,金黄色葡萄球菌肠毒素A、B基因的PCR检测方法。     

金黄色葡萄球菌肠毒素A、B、C在草莓中 表达的研究

目的研究金黄色葡萄球菌在草莓中生长情况及与3种肠毒素SEA、SEB、SEC产生的相关性。方法将实验菌株进行肠毒素分型确认后,分别制备10~4 CFU/g(高)、10~2CFU/g(低)两个浓度菌液,采用浸泡方式人工污染到草莓上,分别于8℃、25℃下贮存,贮存过程中参照GB 4789对草莓进行金黄色葡萄球菌计数和金黄色葡萄球菌肠毒素(A-C)检测。结果适宜条件下,无论初始污染程度高低,金黄色葡萄球菌都能在草莓上正常生长代谢并产生肠毒素,特别是SEA的产生较SEB和SEC迅速。其中,25℃贮存条件下,金黄色葡萄球菌累计到10~4 CFU/g以上就可从样品中检测到SEA,累计到10~5 CFU/g以上可以检测到SEC,累计到10~7CFU/g以上可以检测到SEB;8℃贮存条件下,48 h内未检测到肠毒素。结论以草莓作为金黄色葡萄球菌培养基质,获得了金黄色葡萄球菌生长及与3种常见肠毒素产生的相关性,对草莓微生物风险评估及相关标准制订具有参考意义。     

金黄色葡萄球菌肠毒素B的分离纯化

为了分离纯化金黄色葡萄球菌肠毒素B(SEB),在离心、浓缩后,将浓缩液依次经羧甲基阳离子交换纤维素CM-32和葡聚糖凝胶G-75两步柱层析,再经SDS-聚丙烯酰胺凝胶电泳分析,获得了电泳纯的金黄色葡萄球菌肠毒素B.实验证明,该简化的二步柱层析分离得到的SEB纯度高,方法简便易行,一般实验室均可采用.     

辽宁省2018年食源性金黄色葡萄球菌脉冲场凝胶电泳分子分型及毒力基因的研究

目的 了解辽宁省食源性金黄色葡萄球菌的肠毒素分布情况及基因分型特征。方法 采用脉冲场凝胶电泳(pulsed field gel electrophoresis, PFGE)和肠毒素分型方法在不同角度和层次对2018年辽宁省内分离出的18株食源性金黄色葡萄球菌进行肠毒素检测与PFGE同源性分析。结果 PCR方法及酶联免疫吸附测定(enzyme-linked immunosorbent assay, ELISA)方法对肠毒素结果显示, 18株菌分别存在SEB、SEC、SED、SEH 4种肠毒素, PFGE聚类分析显示, 18株金黄色葡萄球菌相似系数在60.3%~100%之间。结论 金黄色葡萄球菌均可以用PFGE和PCR进行分型, 都具有较好地分型能力, 辨识度高, 对菌株有很好的溯源性。     

多重PCR检测金黄色葡萄球菌六型肠毒素基因的研究

目的:为了建立一种简单、快速检测金黄色葡萄球菌六型肠毒素基因的多重PCR方法。方法:根据相关文献和Genebank报道的编码金黄色葡萄球菌肠毒素A、B、C、D、E、H的基因序列,选择合成了6对特异性引物,建立多重PCR体系,并对反应条件进行了优化。结果:6对引物能同时特异地扩增出120、478、257、319、170、375bp的目的片段,表明6对引物具有良好的特异性。结论:成功地建立了一种同时检测金黄色葡萄球菌六型肠毒素基因的多重PCR方法,在金黄色葡萄球菌肠毒素快速筛查方面具有良好的应用前景。     

建立金黄色葡萄球菌肠毒素B悬浮芯片定量检测方法

目的建立金黄色葡萄球菌肠毒素B悬浮芯片定量检测方法。方法利用双抗体夹心法免疫学原理,以金黄色葡萄球菌肠毒素B的特异性抗体包覆微球为载体,利用悬浮芯片(Bio-Plex)系统建立检测模型;检测不同浓度金黄色葡萄球菌肠毒素B,测定方法的灵敏性;通过该方法对大肠杆菌、普通变型杆菌、蓖麻毒素和禽流感病毒HA、NH蛋白和金黄色葡萄球菌热休克毒素的检测,判断方法的特异性;将不同浓度金黄色葡萄球菌肠毒素B添加到奶粉中验证方法的实用性和稳定性。结果悬浮芯片方法对金黄色葡萄球菌肠毒素B的检测线性范围为0.2～1653.4ng/ml,最低检测值为203pg/ml,均优于酶联免疫吸附实验;除与2.3μg/ml金黄色葡萄球菌热休克毒素有交叉反应外,和其他几种细菌、毒素、蛋白均无交叉反应;对添加相同浓度金黄色葡萄球菌肠毒素B奶粉的检测的相对标准偏差在1.30%～16.93%。结论悬浮芯片定量检测方法对于模拟添加的金黄色葡萄球菌肠毒素B具有良好的检测效果。     

5 种葡萄球菌肠毒素基因MPCR-DHPLC检测方法的建立

设计合成5 种葡萄球菌肠毒素基因（SEA、SEB、SEC、SED、SEE）的特异性引物,对聚合酶链式反应（polymerase chain reaction,PCR）的反应体系进行优化后,建立5 种葡萄球菌肠毒素基因的多重PCR结合变性高效液相色谱（multiplex PCR-denaturing high performance liquid chromatography,MPCR-DHPLC）检测方法,并进行MPCR-DHPLC检测特异性及灵敏度的测定,5 重PCR-DHPLC检测灵敏度可达到100 CFU/mL。MPCR-DHPLC方法应用于食品中金黄色葡萄球菌肠毒素的检测,具有快速、准确、高通量等优点。     

食源性金黄色葡萄球菌肠毒素及其检测方法

金黄色葡萄球菌是一种重要的食源性致病菌,在自然界中广泛分布,其引起的食物中毒是世界性的公共卫生问题。金黄色葡萄球菌肠毒素是引起金黄色葡萄球菌食物中毒的主要致病因子。目前共发现22种金黄色葡萄球菌肠毒素或类肠毒素(SEA-SEE、SEG-SET、SElU、SElU_2和SElV),其中具有催吐活性的被定义为肠毒素,没有催吐活性或者尚待验证的被定义为类肠毒素(SEl)。传统肠毒素SEA~SEE被报道是引起金黄色葡萄球菌食物中毒的主要肠毒素类型,但是大多数新型肠毒素或类肠毒素与食物中毒的关系还没有被真正认识。本文对近几年关于金黄色葡萄球菌肠毒素与食物中毒的关系、肠毒素的表达调控以及肠毒素检测方法的研究进展进行了总结,以期更好地了解金黄色葡萄球菌新型肠毒素致病性,为今后金黄色葡萄球菌食物中毒的预防和控制提供依据。     

食源性金黄色葡萄球菌肠毒素基因型检测与 分布研究

目的对食源性致病金黄色葡萄球菌肠毒素SEA~SEJ基因型分布状况进行调查,并探讨菌株分型与肠毒素基因型分布之间的关联性。方法采用PCR方法扩增金黄色葡萄球菌及肠毒素SEA~SEJ基因型核酸片段,应用全自动微生物基因指纹鉴定系统(Ribo Printer)对菌株进行分型和类聚状况分析。结果分离的24个待测菌株可分为6个亚型,各亚型均匀分布;待测10种肠毒素基因型中,SEI型、SEG型、SEA型和SEB型的出现频率较高,分别占54.2%、41.7%、37.5%和25.0%,同时表达两种以上肠毒素基因型的比率约50%,SEG型和SEI型肠毒素的表达分布具有协同性;金黄色葡萄球菌的溯源性特点与肠毒素分布规律一致。结论食源性金黄色葡萄球菌肠毒素呈现多基因型协同表达的特点,各菌株亚型与肠毒素基因型分布之间存在一定的关联性。     

Textural Properties of Cold-set Gels Induced from Heat-denatured Whey Protein Isolates

A 9% whey protein (WP) isolate solution at pH 7.0 was heat-denatured at 80°C for 30 min. Size-exclusion HPLC showed that native WP formed soluble aggregates after heat-treatment. Additions of CaCl2 (10–40 mM), NaCl (50–400 mM) or glucono-delta-lactone (GDL, 0.4–2.0%, w/v) or hydrolysis by a protease from Bacillus licheniformis caused gelation of the denatured solution at 45°C. Textural parameters, hardness, adhesiveness, and cohesiveness of the gels so formed changed markedly with concentration of added salts or pH by added GDL. Maximum gel hardness occurred at 200 mM NaCl or pH 4.7. Increasing CaCl2 concentration continuously increased gel hardness. Generally, GDL-induced gels were harder than salt-induced gels, and much harder than the protease-induced gel.     

Occurrence of bisphenol-F-diglycidyl ether (BFDGE) in fish canned in oil

The levels of bisphenol-F-diglycidyl ether (BFDGE) were quantified as part of a European survey on the migration of residues of epoxy resins into oil from canned fish. The contents of BFDGE in cans, lids and fish collected from all 15 Member States of the European Union and Switzerland were analysed in 382 samples. Cans and lids were separately extracted with acetonitrile. The extraction from fish was carried out with hexane followed by re-extraction with acetonitrile. The analysis was performed by reverse phase HPL C with fluorescence detection. BFDGE could be detected in 12% of the fish, 24% of the cans and 18% of the lids. Only 3% of the fish contained BFDGE in concentrations considerably above 1mg/kg. In addition to the presented data, a comparison was made with the levels of BADGE (bisphenol-A-diglycidyl ether)analysed in the same products in the context of a previous study.     

Review of techniques to manufacture micro-hydrogel particles for the food industry and their applications

Microgels are ‘soft’ microscopic cross-linked polymeric particles that are being increasingly exploited in a variety of industries for rheology control, encapsulation and targeted delivery. They are valued because of the ability to tune their functionality to address specific applications in oil recovery, coatings, drug delivery, cosmetics, personal care and foods. Food microgels are typically biopolymer hydrogels in the form of microspheres, nanospheres (also called nanogels), spheroids and fibres. The utilisation of engineered microgels in foods has so far been limited, despite their great potential to address several needs in the food industry, including: satiety control, encapsulation of phytonutrients and prebiotics, texture control for healthier food formulations (e.g. reduced fat products), and targeting delivery to specific areas in the digestive tract. We review the scientific and patent literature on the utilisation and manufacturing methods for producing microgels with an emphasis on micro-hydrogels for food applications.     

12—A CRITIQUE OF SOME HYPOTHESES RELATING TO THE HETEROGENEITY OF THE HIGH-SULPHUR PROTEINS OF WOOL

Joubert and Burns prepared a large number of fractions from the high-sulphur proteins of wool and estimated their molecular weights and amino-acid compositions. Their data have been re-examined in order to look for statistically significant interrelations between amino acids and between the proportion of various amino acids and molecular weight. Statistical analysis of the data is also used to examine the credibility of some hypotheses concerning the mechanism of keratin biosynthesis and to provide further evidence for the existence of families of proteins within the high-sulphur fractions of wool.     

Contribution of European research to risk analysis

The European Commission's, Quality of Life Research Programme, Key Action 1—Health, Food & Nutrition is mission-oriented and aims, amongst other things, at providing a healthy, safe and high-quality food supply leading to reinforced consumer confidence in the safety of European food. Its objectives also include the enhancing of the competitiveness of the European food supply. Key Action 1 is currently supporting a number of different types of European collaborative projects in the area of risk analysis. The objectives of these projects range from the development and validation of prevention strategies including the reduction of consumers risks; development and validation of new modelling approaches; harmonization of risk assessment principles, methodologies, and terminology; standardization of methods and systems used for the safety evaluation of transgenic food; providing of tools for the evaluation of human viral contamination of shellfish and quality control; new methodologies for assessing the potential of unintended effects of genetically modified (genetically modified) foods; development of a risk assessment model for Cryptosporidium parvum related to the food and water industries; to the development of a communication platform for genetically modified organism, producers, retailers, regulatory authorities and consumer groups to improve safety assessment procedures, risk management strategies and risk communication; development and validation of new methods for safety testing of transgenic food; evaluation of the safety and efficacy of iron supplementation in pregnant women; evaluation of the potential cancer-preventing activity of pro- and pre-biotic ('synbiotic') combinations in human volunteers. An overview of these projects is presented here.     

Announcing a new international peer-reviewed journal:Food Science and Human Wellness now accepting manuscript submission in English

<正>We are pleased to announce the launch of a new international peer-reviewed journal-Food Science and Human Wellness,ISSN 2213-4530,which is an open access journal,produced and hosted by Elsevier B.V.on behalf of Beijing Academy of Food Sciences.Food Science and Human Wellness is an international peer-reviewed English journal that provides a forum for the dissemination of     

The Latest Data about Development of Chinese Printing Industry in 2013

In the 2014 China（Shanghai）International Printing Week,Director Wang Yanbin released the latest data about development of Chinese printing industry in 2013.According to statistics,in 2013,the total output value of Chinese printing industry exceeded 1trillion Yuan for the first time,reaching 1.03985 trillion Yuan.There were 105,000 printing enterprises in China,employees were 3.415 million.The total asset was 1.06247 trillion Yuan;     

The State Council Issued "Directory of Government Approved Investment Projects(2013 Edition)"

正On December 2nd,2013,the State Council issued the notification of"Directory of Government Approved Investment Projects(2013 Edition)"(hereafter referred to as"notification").It is pointed out in the"notification"that in order to further deepen reforms in investment systems and administrative examination and approval systems,simplify administrative procedures and delegate powers to lower levels,earnestly     

China textile machinery: taking off in progress

正Among the 1600 exhibitors who take apart in the ITMA ASIA+CITME2014 2/3 are Chinese manufactures.If the numerous figures failed to attract your attention,the increase of quality should draw your focus.To adopt the demand of developing textile machine market,domestic textile machinery enterprises now follow the slogan of"technology drives development"to enhance product competitiveness.Our domestic sellers will showcase product ranging from spinning,weaving,dyeing and printing,     

Top Ten News of China's Paper Industry 2013

On December 24th, 2013, the meeting on the selection of top 10 news of China＇s paper industry 2013 sponsored by 〈China Paper Newsletters〉 was held in Beijing. The yearly selection of the top l0 news, which began in 2000, has become a brand activity widely recognized in the industry thanks to the support from the authorities at all levels and public participation.