共查询到20条相似文献,搜索用时 78 毫秒
1.
2.
3.
对3-RPC和3-PRC两种并联机构进行了结构分析,应用并联机构的逆向运动学分析理论,对两种并联机构动平台的运动轨迹规划进行了分析研究.由齐次坐标变换公式推导出了其运动学反解计算公式,进而确定了动平台按预期轨迹运动时应在原动件上施加的运动规律.最后,借助Pro/E建立了该机构的装配模型,通过ADAMS仿真对所规划的运动... 相似文献
4.
5.
针对物流行业需要对大量商品快速分拣、包装的需求,提出了一种(2-RRR&RPR+R)&URS型4自由度并联机构,该机构由静平台、动平台、URS支链、以及与带有R副的连接平台相连接的两条RRR支链和RPR支链组成.首先,运用螺旋理论对机构自由度进行分析,求得该机构可实现两转两移的4自由度运动;随后,采用解析矢量法对其进行位置逆解分析,运用数值搜索法并结合位置逆解方程求得工作空间,分析了机构的工作性能;最后,通过Matlab对位置逆解方程进行仿真,并利用Adams对求解结果进行验证,验证了机构逆解模型的正确性以及机构运动的可实现性.结果表明,该机构能沿X轴方向大范围移动,在Y轴方向可实现大角度转动,可以代替物流行业的人工操作,提高工作效率.研究结果可为机构的进一步动力学分析与应用提供理论基础. 相似文献
6.
7.
8.
通过ADAMS虚拟样机的试验和测试,可以在研究机构性能的同时发现设计中存在的问题并提出改进方法.为了充分阐述3-PRPS并联机构的运动学本质特性,利用线几何的有效方法对机构模型运动学进行了分析,求解了逆运动学关系,并应用ADAMS软件进行运动学仿真分析.其中通过定义已经建立的实体模型参数变量,合理规划选取动平台的运动轨... 相似文献
9.
10.
11.
12.
13.
3自由度并联机器人的运动学与动力学分析 总被引:13,自引:1,他引:12
对一种空间 3 自由度并联机器人(3-RRS 并联机器人)进行运动学和动力学分析.此并联机器人的机构由一个动平台和一个静平台通过3个同样的转动副一转动副一球面副的支链组成.完全描述此并联机器人动平台的位置和姿态需要6个变量,即平台上一参考点的3个位移和3个转角.由于此并联机器人拥有2个转动自由度和1个移动自由度,所以,在动平台的6个位姿变量中只有3个变量是独立的.首先,推导此种并联机器人动平台的6个位姿参数之间的约束关系,给出这些变量之间的解析表达式.然后,基于Lagrange方程建立此并联机器人的动力学模型.在此基础上,通过算例分析驱动构件角速度、驱动力/力矩和能耗的变化规律.这些内容为进一步研究此种空间并联机器人的动态性能、机构优化设计和系统控制等都有非常重要的意义. 相似文献
14.
并联机器人奇异位形研究 总被引:27,自引:2,他引:25
介绍一种并联机器人奇异位形分析计算的新方法。该方法以动平台瞬时运动为基础,建立奇异位形条件,从而获得简化的奇异位形判别方程式,以6自由度三角平台并联机器人和三支链并联机器人为例对这一问题进行研究。 相似文献
15.
Singularity analysis is an important issue in the design of parallel manipulators, since they become uncontrollable at singular
configurations due to the rank deficiency of the Jacobian. This paper analyzes the singularity of a double parallel manipulator
with respect to its workspace. The workspace is decoupled into a positional workspace generated by the first parallel mechanism,
and an orientational workspace by the second mechanism. The singularities occurring outside each workspace are analytically
found by a Jacobian matrix derived for the velocity transformation from the end-effecfor to the linear actuators. The singularity
loci are presented and their geometric properties are examined to prove that the double parallel manipulator is free from
the singularity problem. 相似文献
16.
针对一种特殊3-UCR并联机构,基于反螺旋理论与虚拟机构法对其瞬态运动特性进行了分析,利用支链与动平台的一阶影响系数矩阵之间的关系,建立了此并联机构在螺旋坐标系下的瞬态运动数学模型,得出了一阶影响系数矩阵只与机构输入参数、机构构型有关的结论,同样此建模方法适用于其它欠自由度并联机构的瞬态运动特性分析。通过此数学模型,研究得到任意瞬态的螺旋系节距,表明该机构具有两转动一平动的瞬态运动特性,并利用动静平台平行位姿时的具体数值实例,验证了此瞬态运动特性符合前述分析结果。 相似文献
17.
18.
Singular configurations must be avoided in path planning and control of a parallel manipulator. However, most studies rarely focus on an overall singularity loci distribution of lower-mobility parallel mechanisms. Geometric algebra is employed in analysis of singularity of a 3-RPS parallel manipulator. Twist and wrench in screw theory are represented in geometric algebra. Linear dependency of twists and wrenches are described by outer product in geometric algebra. Reciprocity between twists and constraint wrenches are reflected by duality. To compute the positions of the three spherical joints of the 3-RPS parallel manipulator, Tilt-and-Torsion angles are used to describe the orientation of the moving platform. The outer product of twists and constraint wrenches is used as an index for closeness to singularity(ICS) of the 3-RPS parallel manipulator. An overall and thorough perspective of the singularity loci distribution of the 3-RPS parallel manipulator is disclosed, which is helpful to design, trajectory planning and control of this kind of parallel manipulator. 相似文献
19.
3-TPT并联平台机构的瞬时运动特性 总被引:2,自引:0,他引:2
分析了一种特殊结构的 3- TPT并联机构的瞬时运动特性。首先用反螺旋分析了 3- TPT并联平台机构在初始位形下和沿垂直定台方向移动时的瞬时运动及两种位形下的瞬时运动。其次分析了该两种位形下的主螺旋。得出 :该机构在初始位形下和沿垂直定台方向移动时 ,机构有 5个自由度 ;在两种给定位形下只有 3个自由度。这种 3-TPT机构在不同的位形下性能差别很大 ,利用这种性质 ,该机构可用作五自由度微动机构 ,也可用作变自由度机构。本文的研究 ,丰富了欠秩少自由度并联机构的理论 相似文献