高稳高效海上风电安装平台关键制造技术研究

海上风电作为可再生清洁能源之一,受到世界各国的高度重视与大力发展。我国将海上风电提升至解决能源危机、减缓气候变化、调整能源结构的国家战略高度,到2030年我国单位国内生产总值二氧化碳排放将比2005年下降65%以上,非化石能源占一次能源消费比重将达到25%左右。安装平台不足将是我国海上风电场无法如期建成投产的主要障碍。对自升自航式海上风电安装平台系列高端装备及其设计制造的三大技术难题——腿站立作业易“失稳”、大平台大跨距大倾覆力矩自升易“失控”、高空吊装巨型叶片逾百螺栓精准定位易“失准”,以及焊缝缺陷修复和局部裂纹损伤的激光锻造修复再制造进行了介绍,研制的具有不同规格的系列装备在中国、英国、丹麦、德国等国家的著名海上风电场建设应用情况良好。     

Effect of suspension characteristics on the performance of thermal barrier coatings deposited by suspension plasma spray

This paper investigates the influence of suspension characteristics on microstructure and performance of suspensions plasma sprayed (SPS) thermal barrier coatings (TBCs). Five suspensions were produced using various suspension characteristics, namely, type of solvent and solid load content, and the resultant suspensions were utilized to deposit five different TBCs under identical processing conditions. The produced TBCs were evaluated for their performance i.e. thermal conductivity, thermal cyclic fatigue (TCF) and thermal shock (TS) lifetime. This experimental study revealed that the differences in the microstructure of SPS TBCs produced using varied suspensions resulted in a wide-ranging overall TBC performance. All TBCs exhibited thermal conductivity lower than 1 W/(m. K) except water-ethanol mixed suspension produced TBC. The TS lifetime was also affected to a large extent where 10 wt % solid loaded ethanol and 25 wt % solid loaded water suspensions produced TBCs exhibited the highest and the lowest lifetime, respectively. On the contrary, TCF lifetime was not as significantly affected as thermal conductivity and TS lifetime, and all ethanol suspensions showed marginally better TCF lifetime than water and ethanol-water mixed suspensions deposited TBCs.     

New insight into subcritical rupture of SiC-based filaments at intermediate temperatures (400–900 °C) under air

The delayed failure of SiC fibrous reinforcement has continuously been investigated to warrant the long term performances of Ceramic Matrix Composite (CMC). Chiefly assessed on multifilament tow samples to alleviate some handling difficulties, subcritical crack growth (SCG) parameters are however ruled by structural artifacts which hinder the identification of intrinsic filament behavior. In this paper, we propose to estimate the true filament parameters for 5 fiber types from bundle behavior using a recently communicated Monte Carlo algorithm integrating flaw and stress distributions through a deterministic fracture mechanics law under Paris’ formulation. So computed tow lifetime are broadly dispersed, encompassing raw data, and show a structure-dependent scale effect, revealed by n_filament>n_tow where n is the stress exponent. The relationship between SCG coefficient and chemical composition of the substrate is discussed and highlights the major effect of doping elements (Ti or Zr), oxygen or hydrogen content.     

Structural silicone sealants after exposure to laboratory test for durability assessment

During the service life of structural sealant glazing (SSG) facades, the load-bearing capacity of the silicone bonds needs to be guaranteed. Laboratory tests can assess the durability of SSG-systems based on mechanical characteristics of the bond after simultaneous exposure to both climatic and mechanical loads. This article studies how the material characteristics of two common structural sealants are affected by laboratory and field exposure. Dynamic mechanical analysis (DMA) confirms a reduction in the dynamic modulus of exposed silicone samples. Results from thermogravimetric analysis, Fourier-transform infrared spectroscopy, differential scanning calorimetry, and small-angle X-ray scattering/wide-angle X-ray scattering show differences between the two sealants and indicate no/minor changes in the composition and morphology of the laboratory and field exposed sealants. Mechanical characterization methods, such as DMA, and tensile and shear testing of the structural bond, are shown to be sensitive toward the combined climatic and mechanical loadings, and are hence suitable for studying degradation mechanisms of structural sealants.     

牛磺酸对运动能力影响的研究进展

牛磺酸是一种含硫条件性必需氨基酸,是人和动物机体内不可缺少的一种生理活性物质。牛磺酸对于机体的运动能力有着重要的影响,本文在介绍牛磺酸的代谢过程及生理作用的基础上,对目前国内外关于补充牛磺酸与提高人体的运动能力的关系、牛磺酸的安全性及副作用等方面研究情况做一综述。牛磺酸已开发成颇具潜力的抗运动性疲劳的营养补充剂,同时在医药、卫生、保健等领域里也具有广泛商业价值和社会价值。     

控轧控冷中碳非调质钢的高周疲劳性能

 采用中碳非调质钢制造的轴类等零件常承受交变载荷，因而对钢材疲劳性能具有高的要求。为了评估控轧控冷工艺生产的非调质钢棒材的疲劳性能，利用旋转弯曲疲劳试验机研究了一种常用的钒微合金化中碳非调质钢38MnVS及对比钢38MnS的高周疲劳性能。结果表明，与38MnS钢相比，38MnVS钢中铁素体体积分数增加，组织明显细化；相分析表明约有54%的钒处于M（C，N）相中，且尺寸小于10 nm的M（C，N）粒子质量分数为32%，这些细小粒子的析出强化增量约为116 MPa。38MnVS钢的疲劳极限较38MnS钢提高了62 MPa，提高幅度约为18%；疲劳极限比从38MnS钢的0.43提高到38MnVS钢的0.48。M（C，N）相的析出强化及组织细化是38MnVS钢较38MnS钢具有优异疲劳性能的主要原因，但其疲劳性能仍低于锻态非调质钢。根据试验结果及文献数据，给出了预测铁素体＋珠光体型非调质钢疲劳极限的简便方法。     

Q700D热影响粗晶区疲劳寿命与小裂纹扩展分析

摘要：为提高焊接构件的动载疲劳寿命，以热模拟为试验手段，对Q700D高强钢进行了焊接热模拟，研究了粗晶热影响区的疲劳寿命、小裂纹扩展行为以及组织软化特征。利用Paris方程和轴向拉伸疲劳试验数据，建立了ΔKth值与模拟粗晶区疲劳寿命的对应关系，利用ΔKth值实现了快速预估粗晶区疲劳寿命。研究表明：相同应力幅值下的lgN值与ΔKth值存在一定的线性拟合关系，即ΔKth值越大，则疲劳寿命N越长。小裂纹扩展微观机理在于所形成的大角度晶界（不小于15°）对小裂纹尖端的止裂性较强，可迫使小裂纹尖端转向耗能。CGHAZ的软化与第二相粒子回熔与粗化有关，粗化的第二相粒子易萌生小裂纹，可通过提高大角度晶界抑制裂纹扩展。     

碳纤维复合材料修复带缺陷储气井的应力分析及试验研究

针对天然气储气井井管外壁腐蚀现状,采用有限元计算方法,分析不同外壁腐蚀类型、不同腐蚀缺陷尺寸下储气井井管的应力分布、承载极限及疲劳性能;加工带缺陷储气井井管试件,选择碳纤维复合材料湿缠绕法补强修复;对修复后的井管试件进行有限元应力分析,并进行爆破试验和疲劳试验,以充分验证补强方法的有效性;储气井井管的理论分析和性能试验证明,碳纤维复合材料湿缠绕法补强可以有效地修复带外壁缺陷的储气井井管,有效、快捷地解决在役天然气储气井井管外壁腐蚀问题。