共查询到20条相似文献,搜索用时 70 毫秒
1.
2.
针对三钢中厚板十一辊热矫直机支撑辊轴承频繁损坏的问题,通过对支撑辊矫直过程中承载受力及轴承实际使用情况的分析,认为支撑辊轴承损坏的原因一是辊系精度不足,造成工作辊与其支撑辊未完全接触,使单个轴承轴向承载力过大;二是支撑辊轴承整体式保持器不适应实际工况,需要优化改进。为此,对使用年限达5年及以上的矫直机辊系辊盒及支撑辊轴承座进行精度修复,确保辊盒安装面与支撑辊轴承座装配面装配紧密,使矫直力通过支撑辊能较为均匀地传递到辊盒上,避免支撑辊局部受力过大;选用国产24130CC/C3W33 S1(钢制、冲压保持器,两片)耐高温轴承,使轴承轴向承载力及高温要求满足现场要求。改进后辊系单次在线使用寿命由2~3个月延长至6个月,大幅降低了辊系维修成本。 相似文献
3.
为了提高扇形段在线使用寿命,提高连铸机功能精度和产品质量,通过分析影响400 mm厚板坯连铸机的扇形段使用寿命的原因,例如扇形段驱动辊开口度变大、扇形段驱动辊限位螺栓切断、扇形段辊缝超差大等问题,并通过一系列的优化改进解决了上述问题,结果表明:影响连铸机使用寿命的原因很多,只要找出主要关键原因并解决,就能很好地提高连铸机的使用寿命,提高铸坯的质量。 相似文献
4.
5.
6.
7.
8.
针对十八辊型轧机在实际生产中普遍存在的侧支撑系统稳定性差、背衬轴承消耗大、工作辊断裂、止推轴承损坏频繁等诸多问题,对十八辊轧机侧支撑系统的稳定性、工作辊和止推轴承的故障原因及影响轧机效率的原因进行了研究分析,提出相应解决措施,开发出新型侧支撑辊盒锁紧机构、侧支撑标定装置以及快速换辊装置等多项专有技术,最终获得了一种故障率大幅度降低的高稳定性、高效率的十八辊轧机,并在中冶南方印度不锈钢项目上得到良好应用。 相似文献
9.
10.
为了解决扇形段轴承座水道和辊系水道的锈垢,导致的连铸设备水冷效果不好,影响扇形段的在线使用寿命的问题,通过分析连铸机辊系及轴承座水道锈垢形成原因,并通过一系列的除锈垢工艺解决了上述问题,结果表明:利用合理的酸洗除锈垢工艺清洗连铸机辊系及轴承座,除垢率达到原水垢覆盖面80%以上,能很好的提高连铸机的使用寿命,降低了备件费用。 相似文献
11.
12.
13.
扫描电镜观察显示胫骨是一种由羟基磷灰石和胶原蛋白组成的自然生物陶瓷复合材料.羟基磷灰石具有层状的微结构并且平行于骨的表面排列.观察也显示这些羟基磷灰石层又是由许多羟基磷灰石片所组成,这些羟基磷灰石片具有长而薄的形状,也以平行的方式整齐排列.基于在胫骨中观察到的羟基磷灰石片的微结构特征,通过微结构模型分析及实验,研究了羟基磷灰石片平行排列微结构的最大拔出能.结果表明,羟基磷灰石片长而薄的形状以及平行排列方式增加了其最大拔出能,进而提高了骨的断裂韧性. 相似文献
14.
15.
论述了CAD技术中参数化设计的三种建模方法,重点介绍了基于特征的参数化建模原理。在此基础上,分析机械设计中的机构结构,归纳出其零件的几何特征构成。设计了机构CAD图形库,并提出了该图形库生成步骤和人机交互界面。 相似文献
16.
采用激光辐照对FeCrAlW电弧喷涂层的组织进行致密化处理,借助扫描电镜和X衍射对涂层的组织进行了分析.测试了涂层的显微硬度.结果表明:涂层组织致密度提高,孔隙率明显降低.随着激光扫描速度的增加,涂层的显微硬度降低.在较低的扫描速度下,涂层与基体之间形成互熔区,涂层与基体之间产生良好的冶金结合. 相似文献
17.
18.
19.
C. Colinet 《Intermetallics》2003,11(11-12):1095
A large number of ab-initio calculations of energies of formation of intermetallic compounds have been performed in the last 15 years. The currently used methods are listed. The paper presents a review of the aluminium based compounds which have been studied. Comparisons of calculated and experimental enthalpies of formation are provided for aluminim-3d and-4d transition metal alloys at equiatomic composition. The modelling of the enthalpies of mixing of solid solutions based on a given lattice is described. 相似文献
20.
O. N. Vlasova N. N. Korneeva V. I. Eremenko O. Kh. Fatkullin N. M. Semenova S. N. Petrova D. D. Vaulin 《Metal Science and Heat Treatment》1991,33(12):924-931
Conclusions To provide a high level of mechanical properties in wrought blanks of cast ÉP741NP and ÉP962 alloys it is necessary to form controlled structures. A necklace-type structure formed in homogenizing isostatic treatment, subsequent thermomechanical working including alternation of the operations of deformation in the (+)-area and recrystallization anneals, and final heat treatment is preferable. The temperature conditions of all stages of thermomechanical working are strictly controlled, especially the final operation of deformation and heating for hardening. To eliminate hardening cracks and distortions it is necessary to use molten salts at t=600°C as quenchants. The use of multiple production operations makes it possible to significantly reduce the structural inhomogeneity related to inhertance of the original dendritic structure. However, the structure of the final semifinished product is nevertheless characterized by a difference in occurrence of the processes of polygonization and recrystallization between the former dendritic cells and the interdendritic spaces in deformation and heat treatment.To obtain structurally homogeneous blanks for gas turbine engine parts it is necessary to use basically new methods of remelting such as vacuum double electrode remelting and electron beam remelting with an intermediate vessel.Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 12, pp. 25–29, December, 1991. 相似文献