基于系统浸入和流形不变自适应方法的静止无功补偿器非线性鲁棒自适应控制方法

本文提出一种将系统浸入和流形不变(I&I)自适应控制方法与L2-增益抑制鲁棒控制方法相结合的静止无功补偿器(SVC)的非线性鲁棒自适应控制方法.所提方法首先通过参数估计误差和鲁棒控制律的设计,使得所构造的表示参数估计误差函数的流形不变且吸引,从而使参数估计误差在这一流形上收敛于零.然后,通过所设计的可调参数对参数估计误差的收敛性能进行控制,以此来保证参数估计器对不确定参数的自适应估计能力.最后,采用自适应逆推算法推导鲁棒控制律,并通过使不确定外部扰动满足从输入到输出的耗散性来保证系统对不确定扰动的鲁棒性.仿真结果表明,利用所提方法设计的SVC控制器和参数替换律在参数估计、发电机功角动态响应方面优于传统自适应逆推算法,从而提高了输电系统的稳定水平.     

一类非线性系统鲁棒自适应控制器

反步设计法是针时不确定非线性系统的进行鲁棒自适应控制器设计的主要方法之一,它主要是靠递推来完成,方法简单,但存在过参数化问题.在反步设计法的基础上,通过引入调节函数,选取合适的虚拟控制律,设计一种鲁棒自适应控制器.然后,利用Lyapunov稳定性理论证明了该设计不仅能够克服过参数化的问题,而且能够保证所设计的系统具有鲁棒自适应稳定性.仿真实例证明了该方法的有效性.     

一类非线性系统鲁棒自适应控制器

反步设计法是针对不确定非线性系统的进行鲁棒自适应控制器设计的主要方法之一,它主要是靠递推来完成,方法简单,但存在过参数化问题。在反步设计法的基础上,通过引入调节函数,选取合适的虚拟控制律,设计一种鲁棒自适应控制器。然后,利用Lyapunov稳定性理论证明了该设计不仅能够克服过参数化的问题,而且能够保证所设计的系统具有鲁棒自适应稳定性。仿真实例证明了该方法的有效性。     

带有未建模动态的船舶减摇鳍的鲁棒自适应控制

针对船舶减摇鳍非线性数学模型,提出一种鲁棒自适应控制器,可以用于存在非线性不确定、未知有界扰动和未建模动态的情况。应用Lyapunov稳定性理论证明,所提出的鲁棒自适应控制器可保证整个非线性系统的稳定性,且通过适当选择设计参数,可使跟踪误差达到任意精度。仿真结果表明了所提方法的有效性。     

不确定非线性系统自适应鲁棒控制器设计

针对一类含不确定参数且存在未知扰动的非线性系统,设计了一种新型的自适应鲁棒控制器。用反演设计思想获得具有待定系数的控制器表达式,用BP神经网络自适应调节控制器的参数。仿真结果表明该控制器对系统参数的不确定性和未知扰动具有一定的鲁棒性,并能保证闭环系统全局稳定。     

具有输入齿隙的一类非线性不确定系统自适应鲁棒控制

针对一类具有未知输入齿隙、参数不确定以及未建模动态和干扰的非线性系统,设计了自适应鲁棒控制器.将齿隙非线性模型等价表示为具有有界建模误差的全局线性化模型,在此基础上设计了包含自适应模型补偿、反馈稳定和鲁棒反馈3部分的自适应鲁棒控制器,并给出了系统动态跟踪误差和稳态误差指标.理论分析证明,闭环控制系统信号有界且跟踪误差在任意期望的精度范围内,仿真研究验证了所提出方法的有效性.     

一类不确定非线性系统的鲁棒自适应控制

针对一类具有一般不确定性和未知参数的非线性系统,设计出一种适用于输出跟踪 的鲁棒自适应控制器.该控制器对系统的参数和状态的不确定性具有鲁棒性,能保证闭环系 统的全局稳定性,并解决了ε-跟踪问题.仿真实例表明,所设计的鲁棒自适应控制器具有良好 的跟踪性能.     

基于一类饱和函数的机器人混合鲁棒/自适应控制

提出一类不需要线性PD反馈的混合鲁棒/自适应控制策略,用于不确定性机器人的轨迹 跟踪.其控制结构由一个补偿参数不确定性的自适应控制器和补偿非参数不确定性的鲁棒控 制器构成. 其主要特点是基于一类饱和型函数,提出了一类新颖的鲁棒控制器和非线性滑动 变量的设计方法.基于Lyapunov方法的理论分析和计算机仿真,均保证设计的控制策略能够消 除系统所有的不确定性影响,并达到全局的渐近稳定.     

不确定关联大系统对时变参数的自适应控制

考虑具有时滞的不确定非线性关联大系统的鲁棒控制问题．假设不确定时变参数为半线性或非线性系统的有界输出，通过对时变不确定参数设计自适应律，从而对不确定参数进行估计．利用线性矩阵不等式技术和自适应参数估计方法，设计出鲁棒自适应控制器，从而保证闭环系统渐近稳定．建立了可由线性矩阵不等式表示的镇定条件．仿真示例说明该方法是有效的．     

控制方向未知的高次非线性系统的鲁棒自适应控制

研究了一类具有不可控不稳定线性化的非线性系统的自适应控制问题.该类系统的控制方向未知且含有不确定时变非线性参数.应用Nussbaum-type增益技术和adding a power integrator递推设计方法,设计了一种鲁棒自适应状态反馈控制器.所设计的控制器能够保证闭环系统的所有信号全局一致有界,且系统的状态渐近趋于零.除了假设未知参数及不确定性有界外,所设计的控制策略不需要控制系数的任何先验知识.仿真例子验证了算法的有效性.     

基于切换逻辑的非线性系统自适应鲁棒控制器设计

In this paper, a switching logic-based adaptive robust control is proposed for a class of nonlinearly parameterized systems (NPS). Specifically, the controller mainly consists of a robust type term to address the system uncertainty, and a switching logic tuning mechanism to update the involved control gain. The constructed controller achieves a global uniformly ultimate boundedness (GUUB) result for the system errors, and simulation results are included to demonstrate the effectiveness of the control law.     

Hybrid adaptive robust control of static var compensator in power systems

To improve the transient response of an electric power transmission system, a hybrid adaptive robust control method is proposed in this paper for the static var compensator by incorporating the immersion and invariance adaptive (I&I adaptive) and L₂‐gain control. In contrast to the standard I&I adaptive control algorithm, establishing a target system is not required in constructing the robust control law with the proposed method. Thus, the procedure of solving PDEs to satisfy the immersion condition can be avoided. In addition, both parametric and non‐parametric uncertainties, which commonly exist in electric power transmission systems, are considered. The parametric uncertainty induced by the damping coefficient of the system is estimated by the designed adaptive law, which is constructed by ensuring the estimation error converges to zero. The non‐parametric uncertainty is caused by external disturbances and approximation errors in modeling the uncertain structure. By assuming that the L₂‐gain of the system to the non‐parametric uncertainties satisfies a dissipation inequality, we found that the robustness of the controller can be guaranteed. It is proved that all the system states are globally bounded and converge to a new stable equilibrium. Simulation results are also presented to show the effectiveness of the proposed control method in improving the transient response of the system and the convergence speed of the system states. Copyright © 2013 John Wiley & Sons, Ltd.     

A New Robust Adaptive Control of Uncertain Nonlinear Systems and Pendulum Application

A new robust adaptive control of uncertain nonlinear systems is proposed in this paper. The proposed method combines sliding mode control with the immersion and invariance (I&I) adaptive scheme, and it has more available degrees of freedom than using the backstepping scheme. Via the proposed method, a class of nonlinear systems with mismatched parametric perturbations can be rendered asymptotically stable and the performance of the system can also be improved. Finally, the proposed method is applied to a simple pendulum with motor dynamics, and simulation results show the effectiveness and performance of the proposed method.     

Actuator fault‐tolerant control (FTC) design with post‐fault transient improvement for application to aircraft control

A robust fault‐tolerant control scheme is proposed for uncertain nonlinear systems with zero dynamics, affected by actuator faults and lock‐in‐place and float failures. The proposed controller utilizes an adaptive second‐order sliding mode strategy integrated with the backstepping procedure, retaining the benefits of both the methodologies. A Lyapunov stability analysis has been conducted, which unfolds the advantages offered by the proposed methodology in the presence of inherent modeling errors and strong eventualities of faults and failures. Two modified adaptive laws have been formulated, to approximate the bounds of uncertainties due to modeling and to estimate the fault‐induced parametric uncertainties. The proposed scheme ensures robustness towards linearly parameterized mismatched uncertainties, in addition to parametric and nonparametric matched perturbations. The proposed controller has been shown to yield an improved post‐fault transient performance without any additional expense in the control energy spent. The proposed scheme is applied to the pitch control problem of a nonlinear longitudinal model of Boeing 747‐100/200 aircraft. Simulation results support theoretical propositions and confirm that the proposed controller produces superior post‐fault transient performance compared with already existing approaches designed for similar applications. Besides, the asymptotic stability of the overall controlled system is also established in the event of such faults and failures. Copyright © 2015 John Wiley & Sons, Ltd.     

Robust nonlinear control of atomic force microscope via immersion and invariance

This paper reports an immersion and invariance (I&I)–based robust nonlinear controller for atomic force microscope (AFM) applications. The AFM dynamics is prone to chaos, which, in practice, leads to performance degradation and inaccurate measurements. Therefore, we design a nonlinear tracking controller that stabilizes the AFM dynamics around a desired periodic orbit. To this end, in the tracking error state space, we define a target invariant manifold, on which the system dynamics fulfills the control objective. First, considering a nominal case with full state measurement and no modeling uncertainty, we design an I&I controller to render the target manifold exponentially attractive. Next, we consider an uncertain AFM dynamics, in which only the displacement of the probe cantilever is measured. In the framework of the I&I method, we recast the robust output feedback control problem as the immersion of the output feedback closed‐loop system into the nominal full state one. For this purpose, we define another target invariant manifold that recovers the performance of the nominal control system. Moreover, to handle large uncertainty/disturbances, we incorporate the method of active disturbance rejection into the I&I output feedback control. Through Lyapunov‐based analysis of the closed‐loop stability and robustness, we show the semiglobal practical stability and convergence of the tracking error dynamics. Finally, we present a set of detailed, comparative software simulations to assess the effectiveness of the control method.     

High performance nonlinear adaptive control of temperature in cryogenic wind tunnel

A new nonlinear adaptive control method based on Immersion and Invariant (I&I) approach is proposed for the temperature control of a cryogenic wind tunnel. The proposed control method can be applied to wide range temperature operation of the tunnel by incorporating the nonlinear dynamic model of temperature into the controller design. By constructing globally stable nonlinear observer, and rendering an invariant and attractive manifold in the state space of plant and observer, the uncertain gain of known disturbance and unknown wind tunnel wall temperature are considered in the same manner within the adaptive I&I control frame. In the design, nominal heat transfer coefficient is deployed to avoid complicated design process involving nonlinear parameterization. This design leads to an adaptive output feedback stabilization control law for the temperature with guaranteed transient and steady performance, which exhibits reasonable robustness to time delay in the control input channel and other uncertainties. The analysis and simulation show the effectiveness of the proposed control methodology.     

一类非线性参数化系统自适应重复学习控制

针对一类高阶非线性参数化系统, 利用分段积分机制, 提出了一种新的自适应重复学习控制方法. 该方法结合反馈线性化, 可以处理参数在一个未知紧集内周期性快时变的非线性系统, 通过引进微分-差分混合型参数自适应律, 设计了一种自适应控制策略, 使广义跟踪误差在误差平方范数意义下渐近收敛于零, 通过构造Lyapunov泛函, 给出闭环系统收敛的一个充分条件. 实例仿真结果说明了该方法的可行性.     

一类高阶非线性参数化系统自适应重复学习控制

针对一类高阶非线性参数化系统,利用参数重组技巧,提出了一种自适应重复学习控制方法.该方法结合反馈线性化,可以处理参数在一个未知紧集内周期性、快时变的非线性系统.通过引进微分-差分参数自适应律,设计了一种自适应控制策略,使广义跟踪误差在误差平方范数意义下渐近收敛于零.通过构造Lyapunov泛函,给出了闭环系统收敛的一个充分条件.实例仿真结果说明了该方法的可行性和有效性.     

电液伺服系统的多滑模鲁棒自适应控制

针对一类参数与外负载非匹配不确定的非线性高阶系统,提出了一种基于逐步递推方法的多滑模鲁棒自适应控制策略.应用逐步递推的多滑模控制方法简化了高阶系统的控制问题,同时在自适应控制中加入鲁棒控制的方法,以消除不确定性对控制性能的影响.首先利用逐步递推方法与状态反馈精确线性化理论,得出确定系统的多滑模控制器设计方法;然后基于Lyapunov稳定性分析方法,给出不确定系统的参数自适应律,及鲁棒自适应控制器的设计方法.本文把该控制策略应用到电液伺服系统的位置跟踪控制中,仿真结果显示,该控制方法具有较强的鲁棒性及良好的跟踪效果.     

含有非线性不确定参数的电液系统滑模自适应控制

针对含有非线性不确定参数的电液控制系统, 提出了一种滑模自适应控制方法. 该控制方法主要是为了解决由于初始控制容积的不确定性而引起的, 非线性不确定参数自适应律设计的难题. 其主要特点为, 通过定义一个新型的特Lyapunov 函数, 进而构建系统的自适应控制器及参数自适应律, 并结合滑模控制方法及一种简单的鲁棒设计方法, 给出整个电液系统的滑模自适应控制器, 及所有不确定参数的自适应律. 试验结果表明, 采用该控制方法能够取得良好的性能, 尤其可以补偿非线性不确定参数对系统的影响.