共查询到20条相似文献,搜索用时 77 毫秒
1.
2.
本文介绍一种基于磁致伸缩原理的长行程全数字直线位移传感器,其具有线性度好、分辨率高、与PLC接口简单、结构紧凑、安装方便等优点。本文阐述了它的工作原理及其在模锻水压机平衡校正系统动梁四角位移测量中的应用。 相似文献
3.
在r射线工业CT的原始数据中包含了各种误差,须作校正。文献〔1〕给出了散射修正。本文研究了能谱硬化修正、采传系统的一致性校正、死时间校正以及扇形扫描中的镜象对称,并且给出了相应的数学模式。 相似文献
4.
常用的电涡流位移传感器线性范围小且不耐高压,因此不能应用于电液伺服阀的阀芯位置检测,而差动变压器式位移传感器的频响相对较低,本文提出一种高频响、耐高压电涡流位移传感器结构,理论仿真和实验结果表明:该位移传感器具有良好的线性度、重复性和较高的频响,适用于高性能电液伺服阀和比例阀的阀芯或短行程液压缸活塞的位置检测。 相似文献
5.
6.
7.
李俊国 《组合机床与自动化加工技术》2003,(11):57-57,59
增量式光电位移传感器需辨向,一般给出的为硬件辨向电路。本文给出了一种增量式光电传感器辨向方法——软件辨向。它适用于各种增量式位移传感器的辨向与细分,程序简单、动态响应快。 相似文献
8.
板材剪切与冲裁加工实验的位移测量系统 总被引:1,自引:0,他引:1
针对板材剪切与冲裁加工的特点,设计了一种应变片式位移传感器。传感器可根据需要对量程进行调节,且相对精度不变,特别适于中小位移的测量。结合数据采集系统,在材料试验机上实现了板材剪切加工和精密冲裁实验的位移测量。 相似文献
9.
传统里程计校正方法常使用离线校正手段,在地面环境发生改变的情况下,校正效果较差。为解决上述问题,提高机器人定位精度,以三轮全向移动机器人为平台,提出一种结构简单、鲁棒性强的在线里程计校正方法。该方法通过扩展卡尔曼滤波算法处理传感器数据,以得到机器人的实时位姿信息和速度信息,结合三轮全向移动平台的动力学模型,及时修正里程误差。在V-REP中设计仿真实验,实验结果表明:采用所提方法,校正后的里程精度有了极大改善,并克服了离线校正方法受地面环境影响的问题。在已有实际平台上验证了该算法的有效性。 相似文献
10.
基于高精度位移传感器的机床主轴热变形实时测量 总被引:3,自引:0,他引:3
文章研究了高精度位移传感器在数控机床主轴热变形测量中的应用。考虑到数控机床主轴热变形在热误差研究中的重要性,文中利用基恩士公司生产的高精度CCD激光位移传感器和涡电流位移传感器,对数控机床主轴的热变形进行了实时测量。实验结果表明,所测立式铣床主轴热变形沿Y轴方向最大,在主轴转速5000r/min的条件下,约为41μm。 相似文献
11.
扫描电镜观察显示胫骨是一种由羟基磷灰石和胶原蛋白组成的自然生物陶瓷复合材料.羟基磷灰石具有层状的微结构并且平行于骨的表面排列.观察也显示这些羟基磷灰石层又是由许多羟基磷灰石片所组成,这些羟基磷灰石片具有长而薄的形状,也以平行的方式整齐排列.基于在胫骨中观察到的羟基磷灰石片的微结构特征,通过微结构模型分析及实验,研究了羟基磷灰石片平行排列微结构的最大拔出能.结果表明,羟基磷灰石片长而薄的形状以及平行排列方式增加了其最大拔出能,进而提高了骨的断裂韧性. 相似文献
12.
The technology of ultrasonic welding of components made of Capron tapes producing welded joints with high strength parameters has been developed. The numerical values of the main parameters of the conditions of ultrasonic welding of the Capron tapes are determined. It is shown that the increase in the amplitude and welding pressure shortens the welding time. The experimental results show that the Capron tapes are characterized by geometrical homogeneity in both the transverse and longitudinal direction so that the welded joints can be produced both along and across the tape. 相似文献
13.
14.
采用激光辐照对FeCrAlW电弧喷涂层的组织进行致密化处理,借助扫描电镜和X衍射对涂层的组织进行了分析.测试了涂层的显微硬度.结果表明:涂层组织致密度提高,孔隙率明显降低.随着激光扫描速度的增加,涂层的显微硬度降低.在较低的扫描速度下,涂层与基体之间形成互熔区,涂层与基体之间产生良好的冶金结合. 相似文献
15.
宝山钢铁股份有限公司钢管分公司的穿孔机下辊主减速机在大定修前,减速机轴和下辊大电机的振动情况严重,诊断部门对该减速机进行了测振分析,结合对电机振动、减速机振动的频谱分析和对轴承的故障频率成分分析,找出了主减速机振动的原因是轴承损伤。该分析结果与解体检查的结果相一致。 相似文献
16.
论述了CAD技术中参数化设计的三种建模方法,重点介绍了基于特征的参数化建模原理。在此基础上,分析机械设计中的机构结构,归纳出其零件的几何特征构成。设计了机构CAD图形库,并提出了该图形库生成步骤和人机交互界面。 相似文献
17.
高等教育国际化与中国高等教育施化力培育 总被引:5,自引:2,他引:5
本文从化层、化型、化向与化力等方面考察高等教育国际化的应然本质属性 ,描述与分析中国高等教育在国际化潮流中表现出的发展态势 ,针对种种态势提出中国高等教育核心施化力培育战略 ,以使中国高等教育乃至世界高等教育真正地走向国际化 相似文献
18.
《International Heat Treatment & Surface Engineering》2013,7(4):176-180
AbstractThe paper is devoted to 100th anniversary of the outstanding Russian scientist professor Yuriy Mikhailovich Lakhtin – the founder of the world-famous scientific school of surface strengthening of metals and alloys. Lakhtin's scientific school is recognised for its contribution into research of processes of thermochemical treatment of metals and especially of nitriding. Today at the Department of Metal Science and Heat Treatment of MADI his followers continue the traditions of Lakhtin's scientific school. The development of technologies of surface engineering is based on complex modelling of physical processes realised by thermochemical treatment of metals. Thermodynamic models describe the interaction between metals and components of saturating atmosphere and predict phase composition of diffusion layer. Diffusion models of kinetics of saturation of metals allow us to calculate the rate of growth of diffusion layer and regulation of its depth and structure. Structural models determine quantitative dependence between parameters of structure (grain size, dispersed particles, etc.) and mechanical properties. These models allow us to estimate the level of strengthening by control of structural specifics of strengthened layer. On the basis of this complex of models, new efficient technologies of surface strengthening are developed. 相似文献
19.
20.
《中国有色金属学会会刊》2020,30(8):2265-2273
The direct carbothermic reduction of marmatite in the presence of lime was studied by thermogravimetric method to determine the technical feasibility to produce Zn(g) without polluting with SO2(g). X-ray diffraction analysis of partially reacted samples indicated that the reduction occurred through the formation of ZnCaOS and Ca2Fe2O5 as intermediate products to yield Zn(g), and solid Fe and CaS as the final products. Temperature had the major effect on the rate of reduction. Complete conversion of marmatite was obtained at 1100 °C in about 10 min using 300 mg samples with molar ratio of (Zn, Fe)S:CaO:C equal to 1:1:1. The kinetics of the overall reduction reaction was analyzed by the model ln(1−X)=−kt, which represented the data well up to a fractional conversion of 0.95 in the temperature range of 1000−1150 °C. The determined activation energy in this temperature range was 257 kJ/mol. The results demonstrated the technical feasibility to produce Zn(g) by this method without producing noxious SO2(g) emissions. 相似文献