首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 62 毫秒
1.
本文依据JJF 1059-1999对采用全自动工业分析仪测试煤中灰分测试结果的不确定度进行了评定和表述。对全自动工业分析仪测试煤中水分、挥发分等指标的测量结果的不确定度评定有一定的指导作用。  相似文献   

2.
氨基酸分析仪是一种可对氨基酸进行定量、定性测试的阳离子型离子交换色谱仪,广泛应用于食品、药品、农作物、饲料等领域。该文总结了氨基酸分析仪检定注意事项及参数选择,并对氨基酸分析仪检出限不确定度进行评定,结果为Ur=10%(k=2)。  相似文献   

3.
本文通过对间歇性流动分析仪测定水样过程的分析,采用线性最小二乘法拟合标准曲线不确定度的评定方法对总氰化物的不确定度进行了评定。  相似文献   

4.
本文通过对间歇性流动分析仪测定水样过程的分析,采用线性最小二乘法拟合标准曲线不确定度的评定方法对总氰化物的不确定度进行了评定。  相似文献   

5.
为评定连续流动法香料烟氯的测量不确定度,对连续流动法测定氯的过程进行分析,得到简化的连续流动法香料烟氯的测定因果关系图,建立测量不确定度评定的数学模型,确定其测量不确定度的主要来源为样品的水分、连续流动分析仪测定的样品浓度和测量重复性。通过对测量不确定度进行评定,得出连续流动法香料烟氯测量结果的标准不确定度为0.04%,扩展不确定度为0.08%(α=0.05,k=2)。  相似文献   

6.
电能质量测试分析仪是监测电能质量的工作计量器具,电能质量的好坏直接关系着供需双方的利益,是供需双方都非常重视的。文章阐述了电能质量测试分析仪校准方法的研究,确定了校准方法和校准用标准设备,通过实验对校准结果的不确定度评定进行分析,给出了测量不确定度评定的指导范本,从而保证了电能质量测试分析仪校准的质量。  相似文献   

7.
依据JJF1568-2016《分光光度法流动分析仪校准规范》对水中氰检出限度的不确定度进行评定。  相似文献   

8.
为提高连续流动微流模块分析仪烟草总氮的检测结果准确性,依据JJF 1059.1-2012《测量不确定度评定与表示》,对连续流动微流法测定烟草中总氮的测量不确定度进行了评定。采用因果关系图系统分析影响不确定度的各因素,在此基础上构建了微流法测量不确定度的评定方案,并通过测量模型评定了各不确定度分量。结果表明:(1)总氮的测定值为1.56%,在95%包含概率下其扩展不确定度分别为0.05%;(2)影响测量不确定度的因素主要有标准溶液配制、测量重复性、最小二乘法校准曲线拟合;(3)采用称量法配制标准溶液、选择合适的标准工作溶液浓度范围,可进一步提高分析的精准度。  相似文献   

9.
依据JJF 1059. 1-2012《测量不确定度评定与表示》对连续流动法测定烟草样品中水溶性总糖、还原糖含量的不确定度进行评定,通过分析得出,测量重复性、样品前处理、标准溶液制备、标准曲线拟合、连续流动分析仪测量重复性是不确定度的主要来源。分析结果表明,当烟草样品中水溶性总糖为20. 4%时,扩展不确定度为0. 69%,k=2;还原糖含量为18. 4%,扩展不确定度为0. 77%,k=2。  相似文献   

10.
由于频谱分析仪检定参数众多,传统的不确定度评定方法是对近二十项检定项目逐一进行分析,评定过程十分繁琐。为解决频谱分析仪检定结果不确定度评定项目多、评定过程复杂的问题,在深入研究各检定项目具体表征的是何参量的基础上,结合检定工作实际,提出将频谱分析仪不确定度评定项目归纳为频率、功率、相对电平等三个参量,对频谱分析仪测量不确定度进行评定的方法,并给出了详细的评定过程。  相似文献   

11.
A method is proposed for estimating the parameters of a mixture of exponential and Weibull distributions for which the accuracy of preliminary estimates obtained by graphical analysis is refined in accordance with the criterion of maximum likelihood. The efficiency of the proposed method is supported by the results of statistical modeling.  相似文献   

12.
A novel method for the determination of the optical properties of tissue from time-domain measurements is presented. The data analysis is based on the evaluation of the first moment and the second centralized moment, i.e., the mean time of flight and the variance of the measured distribution of times of flight (DTOF) of photons injected by short (picosecond) laser pulses. Analytical expressions are derived for calculation of absorption and of reduced scattering coefficients from these moments by application of diffusion theory for infinite and semi-infinite homogeneous media. The proposed method was tested on experimental data obtained with phantoms, and results for absorption and reduced scattering coefficients obtained by the proposed method are compared with those obtained by fitting of the same data with analytical solutions of the diffusion equation. Furthermore, the accuracy of the moment analysis was investigated for a range of integration limits of the DTOF. The moment analysis may serve as a comparatively fast method for evaluating optical properties with sufficient accuracy and can be used, e.g., for on-line monitoring of optical properties of biological tissue.  相似文献   

13.
14.
An approximate analytical expression is derived for the velocity of the front of the wave of change of boiling modes on a rod and on a plate. The impact of the Thomson effect and of the heater orientation in the gravity field is included. Adequate agreement is demonstrated between the derived relations and experimental data.  相似文献   

15.
Conventional methods for summation of direct measurement errors are considered. Conditions under which these methods provide consistent results are stated. It is proposed to utilize for characteristic of the total error, its interval estimator or the half-sum of the value obtained by adding up its arithmetic and geometric random errors.Translated from Izmeritel'naya Tekhnika, No. 4, pp. 10–12, April, 1995.  相似文献   

16.
由于空压机进气侧轴承箱蜗壳温度探头密封效果不好,使空压机及其后续管道受到油污染。后将温度探头的O形圈密封改为骨架油封,杜绝了轴承箱漏油问题。文章简介空压机的结构和技术参数,详细介绍了骨架油封的制作和优点。  相似文献   

17.
It is shown that conditions of attainment of marginal states in the material of structural components are formulated on the basis of analysis of force and deformation criteria of formation and development of destruction. The parameters of these criteria are data on types of structural materials, standard and special characteristics of their mechanical properties, structural forms of considered elements of the equipment, and their operating stress loading. In this case, the construction of a system of state equations for describing interrelation of current damage, external actions, and responses to them is based on the concept of calculating variations in properties of materials at all stages of the design life cycle.  相似文献   

18.
The article suggests a method of evaluating the microstructural inhomogeneity of deformation of metals by modeling. The method includes the measurement of deformations of metal according to meshes of a dividing grid with small base and the calculation of the distribution parameters of microdeformations in model representation. It is shown that the modeling method makes it possible objectively to evaluate the microinhomogeneity of deformation of metals independently of the chosen mesh size of the dividing grid. New structural characteristics are introduced: the base and wave of variation expressing the degree of crumbling or amalgamation of metal grains by inhomogeneity of deformation.Translated from Problemy Prochnosti, No. 7, pp. 40–44, July, 1991.  相似文献   

19.
20.
水三相点是开尔文热力学温度的唯一基准点,也是ITS-90国际温标重要的定义固定点。因此,水三相点不确定度分析对整个温标的建立、温度量值传递起着至关重要的作用。近3年来,中国计量科学研究院研制出一系列高质量的水三相点容器,加强了水三相点的研究,为不确定度的分析提供了更为可靠的实验依据。同时,不确定度的分析也是客观评价新研制容器性能的一个重要指标。因此,根据实验结果对新研制容器所复现的水三相点进行了不确定度评定。评定结果表明,其扩展不确定度为0.16mK(k=2.69,P=0.99)。  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号