共查询到20条相似文献,搜索用时 168 毫秒
1.
碱对CO2固化甲阶酚醛树脂粘结剂性能的影响 总被引:5,自引:4,他引:5
利用溶液粘度和砂芯抗压强度的测定,粘结桥断口的扫描电镜(SEM)和盐成分的电子能谱(ESCA)分析,研究了碱在CO2固化甲阶酚醛树脂粘结剂中的作用及对性能的影响。结果表明:碱是甲阶酚醛树脂水溶液的一种有效分散剂,与NaOH和Lioh相比,用KOH配制的树脂溶液粘度较低,随着KOH浓度的增大,树脂溶液的粘度逐渐增大,粘结剂的粘结强度则先增大,后减小,在25%时出现极大值;在强碱性粘结剂的作用下,砂粒表面会部分溶解,溶解部分固化后与粘结剂中的碱一起形成复盐;碱对甲阶酚醛树脂/硼砂水溶液的稳定性有较大的影响,只有在较强的碱性条件下体系才能稳定存在。 相似文献
2.
3.
4.
本文研究了用两种不同粘结剂制作的粘结磁体在不同的固化温度下的强度和磁性能,并与美国进口粘结剂制作的粘结磁体的强度和磁性能进行了对比。实验结果表明,由于这两种粘结剂的固化温度较低,因此在粘结剂含量相同的情况下,由它们制作的粘结磁体的磁性能比用美国进口粘结剂制作的粘结磁体的要高,而且它们的使用温度范围也较宽,达180℃。粘结剂A制作的粘结磁体的强度也略高于用美国进口粘结剂制作的粘结磁体的强度,是一种很理想的制作粘结磁体的粘结剂。 相似文献
5.
6.
钛与不锈钢在赖氨酸生物生产介质中耐腐蚀性能的对比研究 总被引:2,自引:0,他引:2
详细研究了用快淬钕铁硼制备粘结磁体的工艺和工艺因素对它的机械,电学,磁学性能的影响。结果表明,运用数种粘结剂均能获得很好的结果,粘结剂的含量就在一个合适的范围;为防止固化过程中的氧化,应采用惰性气氛,氧化后磁体出现α-Fe相;随成形压力的增大,剩余磁强度和磁能积增大;MQ粉末的居里温度为360℃,粉末和粘结磁体的热稳定性都很好,剩磁温度系数αBr(从室温到120℃)=0.11%,开路磁通不可逆损失 相似文献
7.
8.
9.
10.
本文研究了环境湿度对FFD呋喃系树脂自硬砂固化过程中和储存过程中强度的影响,利用扫描电镜、红外光谱分析观察了树脂膜的破裂形貌,提出湿度对树脂砂粘结剂的破坏机理和增强机理。通过加入KH-550、Si403、Si409等偶联剂来改变粘结桥界面及粘结桥本身性质达到增强的效果 相似文献
11.
扫描电镜观察显示胫骨是一种由羟基磷灰石和胶原蛋白组成的自然生物陶瓷复合材料.羟基磷灰石具有层状的微结构并且平行于骨的表面排列.观察也显示这些羟基磷灰石层又是由许多羟基磷灰石片所组成,这些羟基磷灰石片具有长而薄的形状,也以平行的方式整齐排列.基于在胫骨中观察到的羟基磷灰石片的微结构特征,通过微结构模型分析及实验,研究了羟基磷灰石片平行排列微结构的最大拔出能.结果表明,羟基磷灰石片长而薄的形状以及平行排列方式增加了其最大拔出能,进而提高了骨的断裂韧性. 相似文献
12.
13.
采用激光辐照对FeCrAlW电弧喷涂层的组织进行致密化处理,借助扫描电镜和X衍射对涂层的组织进行了分析.测试了涂层的显微硬度.结果表明:涂层组织致密度提高,孔隙率明显降低.随着激光扫描速度的增加,涂层的显微硬度降低.在较低的扫描速度下,涂层与基体之间形成互熔区,涂层与基体之间产生良好的冶金结合. 相似文献
14.
The technology of ultrasonic welding of components made of Capron tapes producing welded joints with high strength parameters has been developed. The numerical values of the main parameters of the conditions of ultrasonic welding of the Capron tapes are determined. It is shown that the increase in the amplitude and welding pressure shortens the welding time. The experimental results show that the Capron tapes are characterized by geometrical homogeneity in both the transverse and longitudinal direction so that the welded joints can be produced both along and across the tape. 相似文献
15.
宝山钢铁股份有限公司钢管分公司的穿孔机下辊主减速机在大定修前,减速机轴和下辊大电机的振动情况严重,诊断部门对该减速机进行了测振分析,结合对电机振动、减速机振动的频谱分析和对轴承的故障频率成分分析,找出了主减速机振动的原因是轴承损伤。该分析结果与解体检查的结果相一致。 相似文献
16.
论述了CAD技术中参数化设计的三种建模方法,重点介绍了基于特征的参数化建模原理。在此基础上,分析机械设计中的机构结构,归纳出其零件的几何特征构成。设计了机构CAD图形库,并提出了该图形库生成步骤和人机交互界面。 相似文献
17.
《International Heat Treatment & Surface Engineering》2013,7(4):176-180
AbstractThe paper is devoted to 100th anniversary of the outstanding Russian scientist professor Yuriy Mikhailovich Lakhtin – the founder of the world-famous scientific school of surface strengthening of metals and alloys. Lakhtin's scientific school is recognised for its contribution into research of processes of thermochemical treatment of metals and especially of nitriding. Today at the Department of Metal Science and Heat Treatment of MADI his followers continue the traditions of Lakhtin's scientific school. The development of technologies of surface engineering is based on complex modelling of physical processes realised by thermochemical treatment of metals. Thermodynamic models describe the interaction between metals and components of saturating atmosphere and predict phase composition of diffusion layer. Diffusion models of kinetics of saturation of metals allow us to calculate the rate of growth of diffusion layer and regulation of its depth and structure. Structural models determine quantitative dependence between parameters of structure (grain size, dispersed particles, etc.) and mechanical properties. These models allow us to estimate the level of strengthening by control of structural specifics of strengthened layer. On the basis of this complex of models, new efficient technologies of surface strengthening are developed. 相似文献
18.
高等教育国际化与中国高等教育施化力培育 总被引:5,自引:2,他引:5
本文从化层、化型、化向与化力等方面考察高等教育国际化的应然本质属性 ,描述与分析中国高等教育在国际化潮流中表现出的发展态势 ,针对种种态势提出中国高等教育核心施化力培育战略 ,以使中国高等教育乃至世界高等教育真正地走向国际化 相似文献
19.