5 W Si衬底GaN基HEMT研究

介绍了Si衬底上外延生长GaN基HEMT的制备及其直流特性与微波特性的研究结果:栅宽200 μm器件Vgs=0 V时饱和电流密度达0.975 A/mm,最大跨导240 mS/mm,夹断电压-4.5 V,栅漏击穿电压80 V;栅宽1 mm器件,在频率2 GHz下,工作电压Vds=25 V时,连续波输出功率为5.0 W,功率增益为9 dB,功率附加效率为35%.     

栅长90nm的晶格匹配InAlAs／InGaAs／InP HEMT

文章报道了90nm栅长的晶格匹配InP基HEMT器件。栅图形是通过80kV的电子束直写的,并采用了优化的三层胶工艺。器件做在匹配的InAlAs／InGaAs／InP HEMT材料上。当Vds=1．0V时,两指75μm栅宽器件的本征峰值跨导达到720ms／mm,最大电流密度为500mA／mm,器件的阂值电压为．0．8V,截止频率达到127GHz,最大振荡频率达到152GHz。     

非掺杂AlGaN/GaN HEMT微波功率器件

介绍了非掺杂GaN HEMT微波功率器件的结构、制造工艺和测试结果.制作了几种0.6μm栅长、100～1000μm不同栅宽的器件,对于栅宽分别为100,300和500μm的器件,典型最大跨导为190～170mS/mm;截止频率比较相近,大约为24GHz;而最高振荡频率随栅宽增加而降低,分别为56,46和40GHz.测试了8GHz频率时,不同工作条件下1000μm栅宽器件的连续波微波功率特性:Vds=17V,Id=310mA,Pin=25.19dBm时,Po=30dBm(1W),Ga=4.81dB;Vds=18V,Id=290mA,Pin=27dBm时,Po=31.35dBm(1.37W),Ga=4.35dB.     

非掺杂AlGaN/GaN HEMT微波功率器件

介绍了非掺杂GaN HEMT微波功率器件的结构、制造工艺和测试结果.制作了几种0.6μm栅长、100～1000μm不同栅宽的器件,对于栅宽分别为100,300和500μm的器件,典型最大跨导为190～170mS/mm;截止频率比较相近,大约为24GHz;而最高振荡频率随栅宽增加而降低,分别为56,46和40GHz.测试了8GHz频率时,不同工作条件下1000μm栅宽器件的连续波微波功率特性:Vds=17V,Id=310mA,Pin=25.19dBm时,Po=30dBm(1W),Ga=4.81dB;Vds=18V,Id=290mA,Pin=27dBm时,Po=31.35dBm(1.37W),Ga=4.35dB.     

非掺杂AlGaN/GaN HEMT微波功率器件

介绍了非掺杂GaN HEMT微波功率器件的结构、制造工艺和测试结果. 制作了几种0.6μm栅长、100～1000μm不同栅宽的器件，对于栅宽分别为100, 300和500μm的器件，典型最大跨导为190～170mS/mm；截止频率比较相近，大约为24GHz；而最高振荡频率随栅宽增加而降低，分别为56, 46和40GHz. 测试了8GHz频率时，不同工作条件下1000μm栅宽器件的连续波微波功率特性：Vds=17V, Id=310mA, Pin=25.19dBm时，Po=30dBm (1W) ,Ga=4.81dB; Vds=18V, Id=290mA, Pin=27dBm时，Po=31.35dBm (1.37W) ,Ga=4.35dB.     

X波段高输出功率凹栅AIGaN／GaN HEMT

使用自主研制的SiC衬底GaNHEMT外延材料，研制出高输出功率A1GaN／GaNHEMT，优化了器件研制工艺，比接触电阻率小于1．0×10^-6Ω·cm^2，电流崩塌参量小于10％，击穿电压大于80V．小栅宽器件工作电压达到40V，频率为8GHz时输出功率密度大于10W／mm．栅宽为2mm单胞器件，工作电压为28V，频率为8GHz时，输出功率为12．3W，功率增益为4．9dB，功率附加效率为35％．四胞内匹配总栅宽为8mm器件，工作电压为27V时，频率为8GHz时，输出功率为33．8W，功率增益为6．3dB，功率附加效率为41．77％，单胞器件和内匹配器件输出功率为目前国内该器件输出功率的最高结果．     

低导通电阻和栅漏电的高性能InAlN/GaN HEMT

本文制备了100nm栅长的InAlN/GaN HEMT。通过氧处理和优化欧姆接触获得了高性能的InAlN/GaN HEMT。所制备的器件在栅压偏置为2V时,漏端输出电流密度达到2.18A/mm。器件的导通电阻为1.49Ω*mm。与常规器件相比,器件的栅漏电下降了两个数量级。器件也获得良好的射频特性,电流截止频率和最高震荡频率分别为81GHz和138GHz。根据现有的报道,这是国内较早报道GaN基HEMT电流密度超过2A/mm。     

应用于X波段的0.2um V型栅槽AlGaN/GaN HEMT

研制出0.2um栅长 V型栅槽AlGaN/GaN HEMT。该0.2um栅槽是由0.6um 的光刻设计尺寸经过SiN各项同性淀积和各项异性刻蚀而形成。该0.2um栅长V型栅槽AlGaN/GaN HEMT最大截止频率为35GHz,最大震荡频率60GHz。在10GHz频率和20V漏偏压下,该器件最大输出功率达到4.44 W/mm ,功率附加效率49%。     

8W AlGaN/GaN HEMT功率器件的研制

报道了基于国产衬底以及国产外延的AlGaN/GaN HEMT X波段功率器件的研究进展.利用国产衬底以及外延材料,优化了器件栅场板的结构,研制成功栅长0.35μm,栅宽为lmm的微波功率器件.该器件输出电流密度达到0.83A/mm,击穿电压大于100V,跨导为236mS/mm,截止频率(fT)达到30GHz,最大振荡频率(fmax)为32GHz,8GHz下在片进行连续波测试,漏端电压为40V时测试得到功率增益4.9dB,输出功率达8W,功率附加效率(PAE)为45%.     

fmax为100GHz的蓝宝石衬底AlGaN/GaN高电子迁移率晶体管

制作了蓝宝石衬底上生长的AlGaN/GaN高电子迁移率晶体管.0V栅压下,0.3μm栅长、100μm栅宽的器件的饱和漏电流密度为0.85A/mm,峰值跨导为225mS/mm;特征频率和最高振荡频率分别为45和100GHz;4GHz频率下输出功率密度和增益分别为1.8W/mm和9.5dB,8GHz频率下输出功率密度和增益分别为1.12W/mm和11.5dB.     

Technology innovation and process integrations for sub-100nm gate patterning

This paper presents a brief overview of the Applied Centura(R)DPS(R)system,configured with silicon etch DPS Ⅱ chamber, with emphasis on discussing tuning capability for CD uniformity control. It also presents the studies of etch process chemistry and film integration impact for an overall successful gate patterning development. Discussions will focus on resolutions to key issues, such as CD uniformity, line-edge roughness, and multilayer film etching integration.     

White organic light-emitting devices based on fac tris（2- phenylpyridine） iridium sensitized 5,6,11,12-tetraphenylnap -hthacene

We have fabricated the white organic light-emitting devices （WOLEDs） based on 4,4＇ -bis（2,2 -diphenyl vinyl）-1,1＇ - biphenyl （DPVBi） and phosphorescence sensitized 5,6,11,12,-tetraphenylnaphthacene （rubrene）. The device structure is ITO/2T-NATA （20 nm）/NPBX （20 nm）/CBP： x%Ir（ppy）3：0.5% rubrene （8 nm）/NPBX （5 nm）/DPVBi （30 nm）/Alq（30 nm）/LiF（0.5 nm）/A1. In the devices, DPVBi acts as a blue light-emitting layer, the rubrene is sensitized by a phosphorescent material, fac tris （2-phenylpyridine） iridium [Ir（ppy）3], acts as a yellow light-emitting layer, and N,N＇ -bis- （1-naphthyl）- N,N＇ -diphenyl -1, 1＇ -biphenyl-4,4＇ -diamine （NPBX） acts as a hole transporting and exciton blocker layer, respectively. When the concentration of Ir （PPY）3 is 6wt%, the maximum luminance is 24960 cd/m^2 at an applied voltage of 15 V, and the maximum luminous efficiency is 5.17 cd/A at an applied voltage of 8 V.     

Complete approach to automatic identification and subpixel center location for ellipse feature

To meet the need of automatic image features extraction with high precision in visual inspection, a complete approach to automatic identification and sub-pixel center location for similar-ellipse feature is proposed. In the method, the feature area is identified automatically based on the edge attribute, and the sub-pixel center location is accomplished with the leastsquare algorithm. It shows that the method is valid, practical, and has high precision by experiment. Meanwhile this method can meet the need of instrumentation of visual inspection because of easy realization and without man-machine interaction.     

小角度扩展相关性近似算法分析

本论文提出一种在多天线MIMO信道相关性建模中小角度扩展近似理论算法,并应用于分析MIMO系统性能。分析中分别对三种不同角能量分布情况下的空间相关性研发快速近似计算法,并同时提出双模(Bi-Modal)角能量分布情况下的近似运算。通过分析这些新方法的近似效率,可以得到计算简单、复杂度低、而且符合实际的MIMO相关信道矩阵,对系统级的快速高效计算法的研究和系统级的评估以及误差分析具有重要的意义。     

A Versatile Mixed-Signal Pin Approach for Cost-Effective Test of Automotive ICs

Integrated circuits (ICs) intended for increasingly sophisticated automotive applications bring unique test demands. Advanced ICs for applications such as highly integrated automatic braking system (ABS) and airbag controllers combine high voltage digital channels, significant VI demands and precise timing capability. Along with continued missioncritical reliability concerns, the trend toward higher voltage operation and increased device integration requires specialized test capabilities able to extend across the wide operating ranges found in automotive applications. Among these capabilities, automotive test requirements increasingly dictate a need for a cost-effective versatile mixed-signal pin electronics with very high data rates reaching up to 50MHz with a voltage swing of-2 V to +28 V.     

Optical vibration and deviation measurement of rotating machine parts

It is of interest to get appropriate information about the dynamic behaviour of rotating machinery parts in service. This paper presents an approach of optical vibration and deviation measurement of such parts. Essential of this method is an image derotator combined with a high speed camera or a laser doppler vibrometer （LDV）.     

INTEGRATION OF OPTICAL AND WIRELESS NETWORKS

正For a long time,optical and wireless systems/net-works are developed in separate communities witha few attempts for in-depth convergence.In fact,it prom-ises many advantages to combine the optical and wire-less technologies in the levels of systems and networks.Recently,both academia and industry have made manyefforts to enter a new phase of development to take op-tical and wireless systems as fully integrated networks.To provide high bandwidth and reliable service for bothfixed and mobile users,a well-designed network must     

社长序言（英文）

正Happy New Year!As we step into a new year,we take a look back at the key feature topics covered in China Communications over the past 12 months and set out our expecta-     

云计算专题（英文）

正Cloud computing is a novel computing paradigm that utilizes remote cloud resources to achieve a high-performance computation.Cloud provides infrastructure,platform and software as different on-demand services.China has made remarkable progress in cloudbased products and operating system technology.The government,enterprises and research institutions are all active in the development of cloud computing-related projects.Despite the progress,many important problems     

Call for Papers—Feature Topic,Vol.12,No.3,2015

正Smart Grid Communications The electric power industry is undergoing profound changes as the industry aims to capture the promise of a smart grid for a sustainable energy future.Enabled by the advanced sensing devices such as Phasor Measurement Units(PMUs),increasingly powerful