双重实时荧光PCR检测副溶血性弧菌毒力基因方法的建立和应用

目的 建立一种同时检测副溶血性弧菌两种毒力基因tdh和trh的双重荧光聚合酶链式反应(PCR)方法,并对我国2 771株食源性副溶血性弧菌携带的毒力基因进行全面检测.方法 针对副溶血性弧菌tdh和trh毒力基因分别设计荧光PCR引物和探针,优化荧光PCR反应体系及反应程序,建立可同时检测两种毒力基因的双重荧光PCR检测...     

副溶血性弧菌实时荧光定量PCR标准模板的构建和检测方法的建立

目的:构建肉制品副溶血性弧菌实时荧光定量PCR的标准阳性模板和检测方法.方法:以副溶血性弧菌toxR基因上特异性片段为目标,设计并合成引物及Taqman探针,将目标片段连接到PGM-T载体上构建重组质粒,建立实时荧光定量检测体系,并考察方法的灵敏性、特异性、重复性和准确性.结果:构建出副溶血性弧菌荧光定量PCR检测方法的标准模板并建立了相应的检测方法,获得的标准曲线方程为:Y=-3.151 lgX+42.86,灵敏度40copies/反应体系,对副溶血性弧菌具有特异性,同时,该方法具有良好的重复性,变异系数小于5％.结论:使用基于Taqman探针技术的荧光定量PCR检测方法能够对食品中致病性副溶血性弧菌进行快速、简便、准确、高效的定量检测.     

食品中副溶血性弧菌toxR和tdh基因双色荧光PCR检测方法的建立

目的 建立对副溶血性弧菌（Vibrio parahaemolyticus）特异性检测toxR（跨膜转录激活蛋白）基因和tdh（热稳定性直接溶血素）毒力基因的Taqman探针双色荧光PCR检测方法。方法 根据副溶血性弧菌toxR基因和tdh基因,分别设计引物和探针,建立Taqman探针双色荧光PCR扩增体系,进行特异性、灵敏度试验;对副溶血性弧菌分离菌株实施检测,了解其tdh基因和tdh基因分布情况。结果 结果表明,副溶血性弧菌标准菌株和3株从食物中毒患者中分离获得的分离株均出现toxR基因和tdh扩增曲线,而溶藻弧菌、单增李斯特菌等31株弧菌属其他菌株和肠杆菌科的菌株未见扩增曲线。从食品中分离的37株副溶血性弧菌分离株均未携带tdh毒力基因。副溶血性弧菌检测灵敏度可达到3.6×102 cfu/mL。结论 该方法可用于同时检测食品中副溶血性弧菌的特异性和毒力基因。     

多重荧光定量PCR法检测海产品中副溶血性弧菌、沙门菌和单增李斯特菌

目的建立检测海产品中副溶血性弧菌、沙门菌和单增李斯特菌的多重荧光定量PCR体系。方法针对副溶血性弧菌tlh基因,沙门菌Ompc基因和单增李斯特菌hly基因设计引物和Taq Man探针,建立多重荧光定量PCR体系,进行特异性与敏感性研究;利用该体系检测海产品中的副溶血性弧菌、沙门菌和单增李斯特菌。结果副溶血性弧菌、沙门菌和单增李斯特菌可得到特异性扩增,而共存于海产品中的其他细菌均未见扩增曲线。敏感性试验显示,该体系对副溶血性弧菌、沙门菌和单增李斯特菌的最低检测限分别为72、40、80 cfu/ml。对舟山采集的150份样品进行检测,检出32份副溶血性弧菌、11份沙门菌、5份单增李斯特菌,与国标法检测结果一致。结论本研究建立的基于Taq Man探针的多重荧光定量PCR检测方法可以特异、灵敏、简单快速地实现对海产品中副溶血性弧菌、沙门菌和单增李斯特菌的检测。     

运用Real-time PCR建立即食虾中副溶血性弧菌分子预测模型

运用Real-time PCR方法建立不同贮藏温度(4~30℃)下即食虾中副溶血性弧菌分子预测模型。将四株副溶血性弧菌混合接种于即食虾中,利用Real-time PCR定量4~30℃下虾中副溶血性弧菌数量,选用Gompertz模型拟合得到10~30℃下副溶血性弧菌最大比生长速率,并用Linear、Square Root和Ratkowsky模型拟合获得二级分子模型,然后对其验证;选用Weibull、Log-linear及Logistic模型拟合4℃及7℃下副溶血性弧菌的失活曲线。结果表明Gompertz模型R2均在0.97以上,可较好地拟合Real-time PCR定量的副溶血性弧菌生长数据;二级分子模型的R2均在0.94以上,准确因子(Af)和偏差因子(Bf)均在接受范围内,可较好地描绘即食虾中副溶血性弧菌的生长速率与贮藏温度之间的关系,其中Linear模型为最适二级模型;但Real-time PCR方法不适用于建立低温下副溶血性弧菌的失活模型。运用Real-time PCR方法可以建立可靠的一、二级分子预测模型,为实际样品中目标菌株的预测模型建立提供研究基础。     

基于内参的副溶血性弧菌实时荧光定量PCR快速检测方法的建立

目的建立基于内参的副溶血性弧菌实时荧光定量PCR方法,快速检测样品中的副溶血性弧菌。方法根据Gen Bank已公布的副溶血性弧菌基因组序列,筛选特异性靶基因,设计特异性引物探针,优化反应体系,并在体系中加入内参(IAC),通过标记不同荧光基团的Taq Man探针来监测IAC,进而实时监控整个PCR反应。按照5~50 cfu/25 g的细菌量人工污染样品,以评价所建立反应的体系。结果以副溶血性弧菌基因组DNA为模板,最低检测限为1 pg/μl;以10倍梯度稀释的菌液经水煮法提取的DNA为模板,最低检测限为4×102cfu/ml;以含有gyr B的质粒为模板,最低检测极限可以达到100 copies/μl;建立gyr B和gyr B-IAC标准曲线,Ct值与模板拷贝数均呈良好线性关系(r2=0.999);人工污染初始菌量为7 cfu/25 g时,样品中副溶血性弧菌增菌6 h即可检出。结论本研究所建立的gyr B-IAC实时荧光定量PCR方法,既能有效检测食品中副溶血性弧菌,又能实时监测PCR反应过程,有效防止"假阴性"的发生,结果可靠,有利于实现海产品中副溶血性弧菌实时荧光定量PCR检测方法的标准化。     

食品沙门氏菌实时荧光PCR快速检测方法建立

根据Genbank提供的沙门氏菌ttrBCA基因序列设计引物和探针,建立了食品沙门氏菌实时荧光PCR快速检测方法。结果显示,该方法只对沙门氏菌基因呈阳性反应,而对其它常见非阳性菌株(志贺氏菌、金黄色葡萄球菌、大肠杆菌、奇异变形杆菌、普通变形杆菌、绿脓杆菌、单增李斯特氏菌、阴沟肠杆菌、副溶血性弧菌)基因组DNA均呈阴性反应,对模拟添加沙门氏菌样品检测,检测低限为240cfu/mL沙门氏菌的DNA,检测食品样品增菌液,仅需约3h,结果表明,该方法适用于食品样品的快速检测。     

实时荧光定量PCR检测食品中常见食源性致病菌

建立一种快速、准确检测食品中常见食源性致病菌的方法。通过对食品样品提取基因组DNA和实时荧光定量PCR(Real-time Fluorescent Quantitative)条件的优化,建立了沙门氏菌、单核细胞增生性李斯特菌、金黄色葡萄球菌、志贺氏菌、蜡样芽孢杆菌和副溶血弧菌这六种食源性致病菌的实时荧光定量PCR检测方法。通过食品样品的检测,同时进行了传统方法验证。研究建立的实时荧光定量PCR鉴定方法具有良好的重复性和准确性,能够2d出具检测报告,具有较强的实际应用价值,可广泛应用于食品快速检测,具有很好的推广应用前景。     

传统发酵豆制品中3种致病菌的三重荧光PCR快速检测方法的建立

为了建立传统发酵豆制品中单增李斯特菌、蜡样芽孢杆菌和金黄色葡萄球菌的三重荧光PCR快速检测方法。以单增李斯特菌hly A基因、蜡样芽孢杆菌Cereolysin AB基因和金黄色葡萄球菌nuc基因为靶基因设计引物与TaqMan探针,通过优化PCR反应体系,建立了可同时检测单增李斯特菌、蜡样芽孢杆菌和金黄色葡萄球菌的三重荧光定量PCR体系,并进行了特异性和敏感性试验。结果显示,该方法灵敏度高,特异性强,重复性好。对26株非目标菌进行检测,结果均为阴性,而定量检测批内和批间的变异系数均小于2%。单增李斯特菌、蜡样芽孢杆菌和金黄色葡萄球菌敏感性试验结果表明,这三种细菌的最低检测浓度分别为3×103cfu/mL、2×104cfu/mL、2×104cfu/mL。应用该方法可在8h内完成对样品中单增李斯特菌、蜡样芽孢杆菌和金黄色葡萄球菌的同步检测。     

水产品中副溶血性弧菌PMA-ddPCR活菌定量检测方法的研究

本研究旨在针对水产品中活的副溶血性弧菌建立一种快速定量的PCR检测方法。基于叠氮溴化丙锭(PMA)在一定光照条件下能抑制死亡菌DNA扩增,以及微滴式数字PCR技术能将检测精度扩展至单分子目标基因,并实现绝对定量的特点,以副溶血性弧菌tlh基因为目的片段设计及筛选适合的特异性引物与探针,优化反应体系,通过对PMA浓度及曝光条件等优化,建立了一种联用PMA-dd PCR技术快速检测水产品中活的副溶血性弧菌的定量检测方法。研究结果显示:选择16μg/m L作为PMA工作浓度,曝光时间为8 min,此条件下能够完全抑制副溶血性弧菌死菌的DNA扩增并对活菌扩增无影响。通过对比PMA-dd PCR和PMA-q PCR的检测低限分别为2×10~1 cfu/mL、2×10~2 cfu/mL,PMA-dd PCR法的灵敏度比PMA-q PCR法的高。应用PMA-dd PCR定量方法检测人工污染的基围虾和小帆立贝这两种海产品,在基围虾中最低可检出1.9×10~1 cfu/g的副溶血性弧菌、在小帆立贝中最低可检出8.9 cfu/g的副溶血性弧菌。该研究为将PCR技术实际应用于水产品中低量污染、活的副溶血性弧菌的定量检测奠定了基础。     

Textural Properties of Cold-set Gels Induced from Heat-denatured Whey Protein Isolates

A 9% whey protein (WP) isolate solution at pH 7.0 was heat-denatured at 80°C for 30 min. Size-exclusion HPLC showed that native WP formed soluble aggregates after heat-treatment. Additions of CaCl2 (10–40 mM), NaCl (50–400 mM) or glucono-delta-lactone (GDL, 0.4–2.0%, w/v) or hydrolysis by a protease from Bacillus licheniformis caused gelation of the denatured solution at 45°C. Textural parameters, hardness, adhesiveness, and cohesiveness of the gels so formed changed markedly with concentration of added salts or pH by added GDL. Maximum gel hardness occurred at 200 mM NaCl or pH 4.7. Increasing CaCl2 concentration continuously increased gel hardness. Generally, GDL-induced gels were harder than salt-induced gels, and much harder than the protease-induced gel.     

Occurrence of bisphenol-F-diglycidyl ether (BFDGE) in fish canned in oil

The levels of bisphenol-F-diglycidyl ether (BFDGE) were quantified as part of a European survey on the migration of residues of epoxy resins into oil from canned fish. The contents of BFDGE in cans, lids and fish collected from all 15 Member States of the European Union and Switzerland were analysed in 382 samples. Cans and lids were separately extracted with acetonitrile. The extraction from fish was carried out with hexane followed by re-extraction with acetonitrile. The analysis was performed by reverse phase HPL C with fluorescence detection. BFDGE could be detected in 12% of the fish, 24% of the cans and 18% of the lids. Only 3% of the fish contained BFDGE in concentrations considerably above 1mg/kg. In addition to the presented data, a comparison was made with the levels of BADGE (bisphenol-A-diglycidyl ether)analysed in the same products in the context of a previous study.     

Contribution of European research to risk analysis

The European Commission's, Quality of Life Research Programme, Key Action 1—Health, Food & Nutrition is mission-oriented and aims, amongst other things, at providing a healthy, safe and high-quality food supply leading to reinforced consumer confidence in the safety of European food. Its objectives also include the enhancing of the competitiveness of the European food supply. Key Action 1 is currently supporting a number of different types of European collaborative projects in the area of risk analysis. The objectives of these projects range from the development and validation of prevention strategies including the reduction of consumers risks; development and validation of new modelling approaches; harmonization of risk assessment principles, methodologies, and terminology; standardization of methods and systems used for the safety evaluation of transgenic food; providing of tools for the evaluation of human viral contamination of shellfish and quality control; new methodologies for assessing the potential of unintended effects of genetically modified (genetically modified) foods; development of a risk assessment model for Cryptosporidium parvum related to the food and water industries; to the development of a communication platform for genetically modified organism, producers, retailers, regulatory authorities and consumer groups to improve safety assessment procedures, risk management strategies and risk communication; development and validation of new methods for safety testing of transgenic food; evaluation of the safety and efficacy of iron supplementation in pregnant women; evaluation of the potential cancer-preventing activity of pro- and pre-biotic ('synbiotic') combinations in human volunteers. An overview of these projects is presented here.     

低温带皮菜籽粕微粉的不同粒级部分的功能特性

为研究低温带皮菜籽粕微粉的不同粒级部分的功能特性,以经低温脱脂的带皮菜籽粕为原料,经微粉碎后筛分成212~425μm、150~212μm和106~150μm的3个不同粒级的微粉样品,检测这些样品的吸水性、吸油性、乳化性和乳化稳定性、蛋白质体外消化率。结果表明:1 3个不同粒级的微粉样品之间的粗纤维含量存在显著差异,表明三者的结构组成成分有一定差异。23个微粉样品的乳化活性和乳化稳定性随粒度级别的减小而显著增加(P0.01)。33个微粉样品的蛋白质体外消化率随粒度级别的减小而显著增加(P0.01)。4不同粒级带皮菜籽粕微粉样品的吸水性与吸油性受其结构组成物质不同和粒度的双重影响,与粒度的相关性不明显。     

Microbiology of food taints

Fresh and processed foods are often spoilt by the presence of undesirable flavours and odours caused by microbial action. The aim of this paper is to review the current knowledge of microbiologically induced taints that occur in a wide range of foodstuffs, including meats, poultry, fish, crustaceans, milk, dairy products, fruits, vegetables, cereals and cereal products. Examples have been chosen where the compounds responsible for the taint have been identified and sufficient data obtained to demonstrate the involvement of microorganisms. However, in some cases the full identity of the causative organism may not have been elucidated. The types of microorganisms covered by this review include bacteria, fungi, yeasts, actinomycetes and cyanobacteria. Although cyanobacteria do not in general infect foods, their presence in aqueous systems and water supplies can lead to off-flavours in aquatic organisms and processed foodstuffs. Several examples of each of these processes are discussed. Wherever possible, the likely biosynthetic pathway used by the microorganism to produce the offending compound in a foodstuff is indicated.     

Analysis for organic residues from aids to polymerization used to make plastics intended for food contact

Polymers intended for food contact use have been analysed for organic residues which could be attributed to a range of substances employed as polymerization aids (e.g. initiators and catalysts). A wide range of polymers was extracted with solvents and the extracts analysed by gas chromatography-mass spectrometry (GC-MS). The overwhelming majority of substances identified were not derived from aids to polymerization but were oligomers, additives and adventitious contaminants. However, a small number of substances were identified as initiator residues. These included tetramethylsuccinonitrile (TMSN) which was observed in two polymers and it derived from recombination of two azobisisobutyronitrile (AIBN) initiator radicals. Methyl benzoate, benzoic acid, biphenyl and phenyl benzoate were detected in one poly(methyl methacrylate) sample and in two polyvinylchlorides and they are thought to be derived from benzoyl peroxide initiator. TMSN was subsequently targeted for analysis of poly-(methyl methacrylate) plastics using proton nuclear magnetic resonance spectrometry (¹     

Tests of potential functional barriers for laminated multilayer food packages. Part II: Medium molecular weight permeants

Experiments were performed to characterize the kinetics of the permeation of different medium molecular weight model permeants: bisphenol A, warfarin and anthracene, from liquid paraffin, through a surrogate potential functional barrier (25 microns-thick orientated polypropylene--OPP) into the food simulants olive oil and 3% (w/v) acetic acid. The characterization of permeation kinetics generally observed the permeation models previously reported to explain the experimental permeation results obtained for a low molecular weight group of model permeants. In general, the model permeants exhibited behaviour consistent with their relative molecular weights with respect to (a) the time taken to attain steady-state permeation into the food simulant in which they were more soluble, (b) their subsequent steady-state permeation rates, and (c) their partition between liquid paraffin and the OPP membrane.     

The development of reference materials for paralytic shellfish poisoning toxins in lyophilized mussel. I: Interlaboratory studies of methods of analysis

This paper describes the first part of a project undertaken to develop mussel reference materials for Paralytic Shellfish Poisoning (PSP) toxins. Two interlaboratory studies were undertaken to investigate the performance of the analytical methodology for several PSP toxins, in particular saxitoxin (STX) and decarbamoyl-saxitoxin (dc-STX) in lyophilized mussels, and to set criteria for the acceptance of results to be applied during the second part of the project: the certification exercise. In the first study, 18 laboratories were asked to measure STX and dc-STX in rehydrated lyophilized mussel material and to identify as many other PSP toxins as possible with a method of their choice. In the second interlaboratory study, 15 laboratories were additionally asked to determine quantitatively STX and dc-STX in rehydrated lyophilized mussel and in a saxitoxin-enriched mussel material. The first study revealed that three out of four postcolumn derivatization methods and one pre-column derivatization method sufficed in principle to determine STX and dc-STX. Most participants (13 of 18) obtained acceptable calibration curves and recoveries. Saxitoxin was hardly detected in the rehydrated lyophilized mussels and results obtained for dc-STX yielded a CV of 58% at a mass fraction of 1.86 mg/kg. Most participants (14 out of 18) identified gonyautoxin-5 (GTX-5) in a hydrolysed extract provided. The first study led to provisional criteria for linearity, recovery and separation. The second study revealed that 6 out of 15 laboratories were able to meet these criteria. Results obtained for dc-STX yielded a CV of 19% at a mass fraction of 3.49mg/kg. Results obtained for STX in the saxitoxin-enriched material yielded a CV of 19% at a mass fraction of 0.34mg/kg. Saxitoxin could not be detected in the PSP-positive material. Hydrolysis was useful to confirm the identity of GTX5 and provided indicative information about C1 and C2 toxins in the PSP-positive material. The methods used in the second interlaboratory study showed sufficiently consistent analysis results to undertake a certification exercise to assign certified values for STX and dc-STX in lyophilized mussel.     

Focus on China's Paper Industry

In the English section of this issue, 〈China Paper Newsletters〉 will introduce ＂National Development and Reform Commission Issued Announcement for Selection of Major Preliminary Research Projects for the ＇13th Five-Year Plan＇＂, ＂2013 Annual Report of China＇s Paper Industry＂, and news of projects and other policies.     

Listen to downstream & search for innovation

正Nowadays,textile enterprises are all taking efforts in transformation and upgrading,like improving producing capacity and optimizing production structure to face market downturn.It claimed a higher request to the standard of textile equipments.In the upcoming of ITMA ASIA+CITME 2014exhibition,this magazine have interviewed several branch associations and a series of relative enterprises,to summarize industrial developing status