Experimentelle Untersuchung des Abwälzverhaltens von Beveloidverzahnungen mit lokal angepassten Verzahnungsdaten entlang der Zahnbreite

Forschung im Ingenieurwesen - Zur Übertragung von Drehmoment und Drehzahl in beliebiger Achsanordnung eignen sich bei kleinem Achswinkel bis 30° Beveloidverzahnungen. Besonders...     

Resistive organic memory devices based on nitrogen-doped CNTs/PSS composites

Journal of Materials Science: Materials in Electronics - Non-volatile organic memory devices were fabricated using polystyrene sulfonate (PSS)?+?nitrogen-doped multi-walled carbon...     

MoSe2 nanoflowers as a counter electrode for quantum dots sensitized solar cells

Journal of Materials Science: Materials in Electronics - Layered transition metal dichalcogenides hold tunable and promising photoelectrochemical properties. MoSe2 is a potential candidate of the...     

Annealing of Mineral-Like Host Matrices for High-Level Waste Immobilization

Inorganic Materials - We have studied the effect of annealing on the chemical and physical properties of mineral-like host matrices for immobilization of the rare-earth–actinide fraction from...     

Use of by-Product Gasoline Fractions Produced by Combining Fuel and Petrochemical Production

Chemistry and Technology of Fuels and Oils - This article considers the alternatives for treatment of the raffinate produced at a unit for the extraction of benzene-containing fractions and the...     

Fractional weighted nuclear norm based two dimensional linear discriminant features for cucumber leaf disease recognition

Multimedia Tools and Applications - The quality and quantity of agricultural products are significantly affected by plant diseases. The plant diseases could be mitigated if identified at an early...     

Deep Learning based Early Prediction Scheme for Breast Cancer

Wireless Personal Communications - Breast cancer is one of the rapid spreading diseases resulting in the death of younger age group of women. Unfortunately, as the detection of cancer is at later...     

Profiling hot isostatically pressed canister–wasteform interaction for Pu-bearing zirconolite-rich wasteforms

Zirconolite-rich full ceramic wasteforms designed to immobilize Pu-bearing wastes were produced via hot isostatic pressing (HIP) using stainless steel (SS) and nickel (Ni) HIP canisters. A detailed profiling of the elemental compositions of the major and minor phases over the canister–wasteform interaction zone was performed using scanning electron microscopy combined with energy-dispersive X-ray spectroscopy (SEM-EDS) characterization. Bulk sample analyses from regions near the center of the HIP canister were also conducted for both samples using X-ray diffraction and SEM-EDS. The sample with the Ni HIP canister showed almost no interaction zone with only minor diffusion of Ni from the inner wall of the canister into the near-surface region of the wasteform. The sample with the SS HIP canister showed ∼100–120 μm of interaction zone dominated by high-temperature Cr diffusion from canister materials to the wasteform with the Cr predominantly incorporated into the durable zirconolite phase. We also examined, for the first time, changes to the HIP canister wall thickness caused by HIPing and demonstrated that no canister wall thinning occurred. Instead, in the areas examined, the canister wall thickness was observed to increase (up to ∼20%) due to the compression occurring during the HIP cycle. Further, only sparse formation of (Cr, Mn)-rich oxide particles were noted within the HIP canister inner wall area immediately adjacent to the ceramic material, with no evidence for reverse diffusion of ceramic materials. Though the HIP canister–wasteform interaction extends to ∼120 μm when using an SS HIP canister for the system investigated, this translates to <<1 vol.% for an industrial scale HIPed wasteform. Importantly, the HIP canister–wasteform interactions did not produce any obviously less durable phases in the wasteform or had any detrimental impact on the HIP canister properties.     

Fuzzy Complex Ranking Method and its Use for Multi-Criteria Comparison of Alternatives

Cybernetics and Systems Analysis - It is noted that fuzzy methods are widely used to substantiate rational decisions in multi-criteria analysis of complex systems since the operating conditions of...     

Novel pearl millet couscous process for West African markets using a low-cost single-screw extruder

Traditional West African pearl millet couscous products are popular; however, their preparation is laborious, time-consuming and energy-demanding, involving agglomeration, steaming, drying and sieving steps. In this study, a process was developed to produce millet couscous using a high pressure, high temperature and low-cost single-screw extruder. The innovation was to directly process the cooked low-moisture extrudate to a couscous product by drying and milling to the appropriate particle size (ranging between 1 and 2 mm). Throughput for the traditional process as prepared for commercial sale is 50 kg per day, but with the same amount of labour, the extrusion process yields ~350 kg per day. A consumer sensory study held in Niamey (Niger) showed that the extruded millet couscous was comparable to traditional couscous, though this was dependent on selection of the proper millet variety. This novel extrusion process could stimulate small- to medium-scale manufacturing of couscous and couscous-type products in West Africa.