162GHz自对准InP/InGaAs异质结双极型晶体管

报道了发射极自对准的InP基异质结双极型晶体管.在集电极电流Ic=34.2mA的条件下,发射极面积为0.8μm×12μm的InP HBT截止频率fT为162GHz,最大振荡频率fmax为52GHz,最大直流增益为120,偏移电压为0.10V,击穿电压BVCEO达到3.8V(Ic=0.1μA).这种器件非常适合在高速低功耗方面的应用,例如OEIC接收机以及模拟数字转换器.     

InP/InGaAs/InP双异质结双极晶体管技术研究

介绍了InP/InGaAs/InP双异质结双极晶体管(DHBT)材料生长、器件结构与设计、制作工艺和性能测试以及在振荡器中的应用等方面的研究.采用发射极-基极自对准工艺制作了InP/InGaAs/InP DHBT器件,发射极尺寸为1.5μm×10μm的器件小电流直流增益β约25,集电极-发射极击穿电压BVCEO≥10V,截止频率,ft和最高振荡频率,fmax分别为50和55GHz;     

InP/InGaAs/InP双异质结双极晶体管技术研究

介绍了InP/InGaAs/InP双异质结双极晶体管(DHBT)材料生长、器件结构与设计、制作工艺和性能测试以及在振荡器中的应用等方面的研究.采用发射极-基极自对准工艺制作了InP/InGaAs/InP DHBT器件,发射极尺寸为1.5μm×10μm的器件小电流直流增益β约25,集电极-发射极击穿电压BVCEO≥10V,截止频率,ft和最高振荡频率,fmax分别为50和55GHz;     

4英寸f_(max)=620 GHz的0.25μm InP DHBT北大核心

报道了一款在101.6 mm(4英寸)InP晶圆上制备的特征尺寸为0.25μm的磷化铟双异质结双极型晶体管。采用发射极自对准技术和介质钝化工艺,器件的发射极典型尺寸为0.25μm×3.00μm,最大电流增益为25,当发射极电流密度为10μA/μm^(2)时,器件的击穿电压达到了4.2 V,电流增益截止频率为390 GHz,最高振荡频率为620 GHz。建立了用于提取器件寄生参数的小信号等效电路模型,模型的仿真结果与高频实测数据具有很好的拟合精度。     

采用新的T型发射极技术的自对准InP/GaInAs单异质结双极晶体管的性能

研究了一种采用新的T型发射极技术的自对准InP/GaInAs单异质结双极晶体管.采用了U型发射极图形结构、选择性湿法腐蚀、LEU以及空气桥等技术,成功制作了U型发射极尺寸为2μm×12μm的器件.该器件的共射直流增益达到170,残余电压约为0.2V,膝点电压仅为0.5V,而击穿电压超过了2V.器件的截止频率达到85GHz,最大振荡频率为72GHz,这些特性使此类器件更适合于低压、低功耗及高频方面的应用.     

fT=140GHz,fmax=200GHz的超高速InP DHBT

InP/InGaAs/InP DHBT具有频带宽、电流驱动能力强、线性好、相位噪声低和阈值电压一致性好等优点成为研究热点。通过优化外延材料结构设计和采用四元InGaAsP缓变层消除集电结电流阻塞效应;改进发射极-基极自对准工艺和集电区台面侧向腐蚀工艺,降低Rb和Cbc乘积;优化PI钝化工艺和空气桥互联等工艺,实现了发射极面积为2μm×10μm的自对准InP/InGaAs/InP DHBT器件,其直流增益β约为25,击穿电压BVCEO≥7 V@10μA,在VCE=4 V,Ic=10 mA下,截止频率fT=140 GHz,最高振荡频率fmax=200 GHz,优于同一外延片上的非自对准InP DHB器件,该器件将可应用于高速光通信和微波毫米波通信。     

f=210GHz的超高速InP/InGaAs单异质结晶体管

成功地将Polyimide钝化平坦化工艺应用于InP/InGaAs单异质结晶体管制作工艺中.在Vce=1.1V,Ic=33.5mA的偏置条件下,发射极尺寸为1.4μm×1.5μm的器件,其ft达到210GHz.这种器件非常适合高速低功耗方面的应用,例如超高速数模混合电路以及光学通信系统等.     

4GHz 300mWInGaP/GaAs HBT功率管研制

通过采用发射极-基极金属自对准、发射极镇流电阻,电镀空气桥等工艺改善了器件的高频特性,提高了器件热稳定性与功率特性.当器件工作在AB类,工作频率为4 GHz,集电极偏置电压为3.5 V时,尺寸为16×(3 μm×15 μm)的功率管获得了最大输出功率为24.9 dBm(309.0 mW)、功率增益为8.1dB的良好性能.     

基极微空气桥和发射极空气桥的InP/InGaAs HBT

报道了具有基极微空气桥和发射极空气桥结构的InP单异质结双极型晶体管(SHBT).由于基极微空气桥和发射极空气桥结构有效地减小了寄生,发射极尺寸为2 μm×12.5 μm的InP HBT的截止频率达到了178GHz.这种器件对高速低功耗的应用非常关键,例如OEIC接收机以及模拟、数字转换器.     

基极微空气桥和发射极空气桥的InP/InGaAs HBT

报道了具有基极微空气桥和发射极空气桥结构的InP单异质结双极型晶体管(SHBT).由于基极微空气桥和发射极空气桥结构有效地减小了寄生,发射极尺寸为2 μm×12.5 μm的InP HBT的截止频率达到了178GHz.这种器件对高速低功耗的应用非常关键,例如OEIC接收机以及模拟、数字转换器.     

Curved crystal spectrometer for the measurement of X-ray lines from laser-produced plasmas

In order to diagnose the laser-produced plasmas, a focusing curved crystal spectrometer has been developed for measuring the X-ray lines radiated from a laser-produced plasmas. The design is based on the fact that the ray emitted from a source located at one focus of an ellipse will converge on the other focus by the reflection of the elliptical surface. The focal length and the eccentricity of the ellipse are 1350 mm and 0.9586, respectively. The spectrometer can be used to measure the X- ray lines in the wavelength range of 0.2-0.37 nm, and a LiF crystal （200） （2d = 0.4027 nm） is used as dispersive element covering Bragg angle from 30° to 67.5°. The spectrometer was tested on Shengnang- Ⅱ which can deliver laser energy of 60-80 J/pulse and the laser wavelength is 0.35 μm. Photographs of spectra including the 1 s2p ^1P1-1s^2 ^1S0 resonance line（w）, the 1s2p ^3P2-1s^2 1S0 magnetic quadrupole line（x）, the 1s2p ^3P1-1 s^2 ^1S0 intercombination lines（y）, the 1 s2p ^3S~1-1 s^2 ^1S0 forbidden line（z） in helium-like Ti Ⅹ Ⅺ and the 1 s2s2p ^2P3/2-1 s622s ^2S1/2 line（q） in lithium-like Ti Ⅹ Ⅹhave been recorded with a X-ray CCD camera. The experimental result shows that the wavelength resolution（λ/△ 2） is above 1000 and the elliptical crystal spectrometer is suitable for X-ray spectroscopy.     

Preparation and Characterization of TaN ALD Precursors

High purity organic-tantalum precursors for thin film ALD TaN were synthesized and characterized.Vapor pressure and thermal stability of these precursors were studied.From the vapor pressure analysis,it was found that TBTEMT has a higher vapor pressure than any other published liquid TaN precursor,including TBTDET,TAITMATA,and IPTDET.Thermal stability of the alkyl groups on the precursors was investigated using a 1H NMR technique.The results indicated that the tertbutylimino group is the most stable group on TBTDET and TBTEMT as compared to the dialkylamido groups.Thermal stability of TaN precursors decreased in the following order:TBTDET ＞ PDMAT ＞ TBTEMT.In conclusion,precursor vapor pressure and thermal stability were tuned by making slight variations in the ligand sphere around the metal center.     

Electronic Structure of Semiconductor Nanocrystals

This paper reviews our recent development of the use of the large-scale pseudopotential method to calculate the electronic structure of semiconductor nanocrystals, such as quantum dots and wires, which often contain tens of thousands of atoms. The calculated size-dependent exciton energies and absorption spectra of quantum dots and wires are in good agreement with experiments. We show that the electronic structure of a nanocrystal can be tuned not only by its size,but also by its shape. Finally,we show that defect properties in quantum dots can be significantly different from those in bulk semiconductors.     

Critical Stage Rule-Based Real Time Dispatch（RTD）System in Highly-Mixed-Products （HMP） FAB

An improving utilization and efficiency of critical equipments in semiconductor wafer fabrication facilities are concerned. Semiconductor manufacturing FAB is one of the most complicated and cost sensitive environments. A good dispatching tool will make big difference in equipment utilization and FAB output as a whole. The equipment in this paper is In-Line DUV Scanner. There are many factors impacting utilization and output on this equipment group. In HMP environment one of the issues is changing of reticule in this area and idle counts due to load unbalance between equipments. Here we'll introduce a rule-based RTD system which aiming at decreasing the number of recipe change and idle counts among a group of scanner equipment in a high-mixed-products FAB.     

GaAsSb/InAlAs PA DHBTs Grown by Production MBE

The epi material growth of GaAsSb based DHBTs with InAlAs emitters are investigated using a 4 × 100mm multi-wafer production Riber 49 MBE reactor fully equipped with real-time in-situ sensors including an absorption band edge spectroscope and an optical-based flux monitor. The state-of-the-art hole mobilities are obtained from 100nm thick carbon-doped GaAsSb. A Sb composition variation of less than ± 0.1 atomic percent across a 4 × 100mm platen configuration has been achieved. The large area InAlAs/GaAsSb/InP DHBT device demonstrates excellent DC characteristics,such as BVCEO＞6V and a DC current gain of 45 at 1kA/cm2 for an emitter size of 50μm × 50μm. The devices have a 40nm thick GaAsSb base with p-doping of 4. 5 × 1019cm-3 . Devices with an emitter size of 4μm × 30μm have a current gain variation less than 2% across the fully processed 100mm wafer. ft and fmax are over 50GHz,with a power efficiency of 50% ,which are comparable to standard power GaAs HBT results. These results demonstrate the potential application of GaAsSb/InP DHBT for power amplifiers and the feasibility of multi-wafer MBE for mass production of GaAsSb-based HBTs.     

Influence of polarization extinction ratio on distributed polarization coupling detection

Distributed polarization coupling in polarization-maintaining fibers can be detected by using a white light Michelson interferometer. This technique usually requires that only one polarization mode is excited. However, in practical measurement, the injection polarization direction could not be exactly aligned to one of the principal axes of the PMF, so the influence of the polarization extinction ratio should be considered. Based on the polarization coupling theory, the influence of the incident polarization extinction on the measurement result is evaluated and analyzed, and a method for distributed polarization coupling detection is developed when both two orthogonal eigenmodes are excited.     

Noise character analysis and the restraint of self-pulsation laser diodes

We calculate the Langevin noise sources of self-pulsation laser diodes, analyze the effects of active region noise and saturable-absorption region noise on the power fluctuation as well as period fluctuation, and propose a novel method to restrain the noise effects. A visible SIMULINK model is established to simulate the system, The results indicate that the effects of noise in absorption region can be ignored; that with the increase of DC injecting current, the noise effects enhance power jitter, and nevertheless, the period jitter is decreased; and that with external sinusoidal current modulating the self-pulsation laser diode, the noise-induced power jitter and period jitter can be suppressed greatly. This work is valuable for clock recovery in all-optical network.     

High-quality single-crystal CdSe nanoribbons and their optical properties

Large-scale synthesis of single-crystal CdSe nanoribbons is achieved by a modified thermal evaporation method, in which two-step-thermal-evaporation is used to control CdSe sources＇ evaporation. The synthesized CdSe nanoribbons are usually several micrometers in width, 50 nm in thickness, and tens to several hundred micrometers in length. Studies have shown that high-quality CdSe nanoribbons with regular shapes can be obtained by this method. Room-temperature photolumines-cence indicates that the lasing emission at 710 nm has been observed under optical pumping （266 nm） at power densities of 25-153 kW/cm^2. The full width half maximum （FWHM） of the lasing mode is 0.67 nm     

Propagation of hermite-cosh-gaussian beams passing through ABCD optical system with an annular aperture

By using the expansion of the aperture function into a finte sum of complex Gaussian functions, the corresponding analytical expressions of Hermite-cosh-Gaussian beams passing through annular apertured paraxially and symmetrically optical systems written in terms of ABCD matrix were derived, and they could reduce to the cases with squared aperture. In a similar way, the corresponding analytical expressions of cosh-Gaussian beams through annular apertured ABCD matrix were also given. The method could save more calculation time than that by using the diffraction integral formula directly.     

中国建立EB级存储实验室,致力云计算应用(英文)

正With the support of 863 programs,Sugon Information Industry Co.,Ltd.,set up a dawning EB-class storage laboratory to address massive data storage requirements and largescale cloud computing demonstration applications.The Dawning EB-class cloud storage system adopts advanced fault-tolerant architecture,efficient data fault-tolerant algorithms with user authentication and data encryption policies to deal with the"lost""wrong"and"stolen"problems of data for ensuring the reliability and safety of the EB-class storage system in the public network application environments.The Dawning EB-class Storage Laboratory taking advan-