利用线粒体DNA Cyt b基因PCR-RFLP分析方法鉴别羊肉和鸭肉

建立了一种利用线粒体DNA(mtDNA) Cyt b基因PCR-RFLP分析来鉴别羊肉和鸭肉的方法。采用一对通用引物扩增绵羊、山羊和鸭的mtDNACytb基因,并对扩增产物用DNA限制性内切酶Bsu36I和SpeI进行酶切,电泳分析酶切产物的变化。结果表明通用引物可扩增羊和鸭472bp的PCR产物,经两种内切酶酶切后,绵羊、山羊和鸭的PCR产物分别被切为大小不同的片段,其中绵羊和山羊被SpeI切为213bp和259bp,而鸭则被Bsu36I切为95bp和377bp。利用PCR-RFLP分析mtDNA Cyt b基因的方法操作简单,是一种快速鉴别羊肉和鸭肉的可靠方法。     

霍乱弧菌O1群和O139群基因分型方法

构建SXT整合酶基因扩增BclⅠ内切酶消化体系,建立霍乱弧菌O1群和O139群的快速检测,根据SXT基因设计合成引物,PCR扩增目的片断,对PCR产物用BclⅠ限制性内切酶酶切分析.结果显示：50株菌株的检出率为100%,扩增产物及酶切片段与预期的靶序列长度和限制酶谱分析相-致.扩增霍乱弧菌O1群和O139群的SXT整合酶基因并经过BclⅠ内切酶酶切分型的方法简易、快速、特异性好,为该病快速诊断和分子流行病学调查提供了新的技术手段.     

环介导恒温扩增方法快速检测乳中单增李斯特菌

建立了一种快速检测灭菌乳中单增李斯特菌的环介导恒温扩增(Loop-Mediated Isothermal Amplification,LAMP)方法。以hlyA基因作为靶基因,对人工污染乳中单增李斯特菌进行了LAMP方法的灵敏度试验,同时与PCR方法进行比较。并对单增李斯特菌和7种其他乳中常见致病菌进行了LAMP检测,以验证该方法的特异性。结果表明,LAMP检测单增李斯特菌的特异性强,检出限为42 mL-1,其灵敏度比普通PCR高10倍。并且检测时间比PCR更短,在1.5 h内即可完成扩增反应。此方法快速、特异、简单、灵敏,具有较高的推广价值。     

应用PCR-RFLP和芯片生物分析系统鉴别河豚鱼品种

应用聚合酶链式反应-限制性片段长度多态分析和芯片生物分析系统建立5种河豚的分子生物学品种鉴定新方法。首先提取鱼的DNA进行细胞色素b基因的PCR扩增,然后用DdeⅠ、HaeⅢ和NlaⅢ三种限制性内切酶进行酶切,在Agilent DNA1000芯片上对酶切片段进行分离。该方法可成功区分5个河豚鱼品种,是一种快速、简便、有效的鱼类品种鉴定分析手段。     

多重PCR同时检测食品中4 种细菌与常见霉菌

建立一种同时检测食品中金黄色葡萄球菌、单核细胞增生李斯特氏菌、沙门氏菌、大肠杆菌O157:H7以及霉菌的多重聚合酶链式反应（polymerase chain reaction,PCR）检测方法。根据金黄色葡萄球菌的耐热核酸酶基因（nuc）、沙门氏菌的侵袭正调节蛋白基因（hilA）、大肠杆菌O157:H7鞭毛基因（flic）、单核细胞增生李斯特氏菌的毒力调控蛋白基因（prfA）及霉菌18S?rRNA基因V5区分别设计5?对特异性引物,并对PCR扩增反应体系和扩增条件进行优化,确定获得特异性良好的PCR扩增产物。而后在37?℃对人工污染致病菌的香肠、面包和豆腐进行增菌培养,5?种致病微生物在20?h内的检出限均可达到100?CFU/25?g。本实验建立的多重PCR检测方法适用于食品中4?种细菌与常见霉菌的同时检测,相较于传统检测方法,具有快速、简便、特异性高的优点。     

食品中3种致病李氏菌MPCR-DHPLC检测方法的建立

应用复合PCR(multiplex PCR,MPCR)结合变性高效液相色谱(denaturing high-performance liquid chromatography,DHPLC)技术建立食品中单核细胞增生李斯特菌、绵羊李斯特菌和英诺克李斯特菌的快速高通量检测方法。根据单核细胞增生李斯特菌、绵羊李斯特菌和英诺克李斯特菌的特异基因序列分别设计引物,MPCR扩增的产物经DHPLC技术进行快速检测。以94株参考菌株做特异性实验,并开展了重现性检测实验。MPCR-DHPLC方法同步检测到单核细胞增生李斯特菌、绵羊李斯特菌和英诺克李斯特菌的特异性阳性吸收峰,未检测到李斯特菌属其他近源种和非近源种参考菌株的阳性吸收峰,且重现性良好。该方法具有很好的特异性,可以快速、准确、高通量地检测食品中单核细胞增生李斯特菌、绵羊李斯特菌和英诺克李斯特菌,是食品微生物快速检测的新技术。     

基于高分辨率溶解曲线分析鉴别食品中的3种李斯特氏菌

本研究利用高分辨率熔解曲线的方法,以iap基因为靶标新设计一对引物同时鉴别单增李斯特氏菌、伊氏李斯特氏菌和英诺克李斯特氏菌,其余14种常见食源性病原微生物扩增为阴性结果,单增李斯特氏菌和伊氏李斯特氏菌的检出限为10个拷贝,英诺克李斯特氏菌的检测限为50个拷贝。本研究对78份样品进行HRM-realtimePCR法、GB4789.30-2016和SN/T1870-2016(荧光PCR法)的检测,并对3种方法的检测结果进行统计学分析。结果显示:HRM法和国标方法、HRM法和荧光PCR法的检测结果之间存在统计学差异,国标方法和荧光PCR法检测结果之间无统计学差异。本研究建立的基于HRM-real time PCR法检测3种李斯特氏菌的方法快速高效、特异性好、成本低,适用于食品中李斯特氏菌的日常检测和监管。     

肉中单核细胞增生李斯特菌PCR快速检测方法建立

目的:建立单核细胞增生李斯特菌(Listeria monocytogenes,LM)快速、敏感、特异的PCR诊断方法。方法:采用聚合酶链式反应技术(PCR)特异性扩增单核细胞增生李斯特菌内化素基因(ivlA),并评价该方法的特异性与敏感性。结果:在445bp处出现inlA基因的目的片断,只有单增李斯特菌的目的片段获得扩增,其他菌种扩增均呈阴性;该方法可以检测到DNA的检测限。结论:PCR方法比传统细菌检测方法更特异、快速、灵敏和简便;为肉中单增李斯特菌的快速检测提供了新的手段。     

添加扩增内标的单增李斯特菌PCR检测方法的建立与应用

以单增李斯特菌inl A基因为靶基因,设计一对特异性引物,以16S rRNA为扩增内标对照,建立了一种含有扩增内标的单增李斯特菌PCR检测方法。优化了PCR反应体系,并对PCR检测方法的特异性、灵敏度、人工污染样品及食品样品检测效果进行了测试。对2株单增李斯特菌、1株英诺克李斯特菌以及19株非李斯特菌菌株进行PCR检测,结果显示,只有2株单增李斯特菌能被检出大小为826 bp的特异性片段,其余20株细菌只能检出1 500 bp的扩增内标片段。灵敏度实验结果显示,基因组DNA和纯培养物的最低检出限分别为1.80×10~2fg/μL和1.21×10~2CFU/m L。当人工污染牛乳样品中单增李斯特菌在最低接种量为0.48 CFU/m L时,经8 h增菌培养后可被该方法检出。采用该研究建立的检测方法对36种食品样品进行检测,证实了该检测方法可以指示检测过程中出现的假阴性现象。综上所述,该研究建立的PCR检测方法能特异性的检测单增李斯特菌,并可有效排除检测过程中出现的假阴性现象,提高检测的准确性。     

应用基因芯片技术检测肉及肉制品中5种致病菌

建立一种运用多重聚合酶链式反应(PCR)结合基因芯片技术检测大肠埃希氏菌、沙门氏菌、金黄色葡萄球菌、志贺氏菌和单核细胞增生李斯特菌5种食源性致病菌的快速、准确、灵敏的方法。分别选取编码大肠埃希氏菌的slt基因、沙门氏菌invA基因、金黄色葡萄球菌nuc基因、志贺氏菌ipaH基因和单核细胞增生李斯特菌inlA基因,并以细菌16S rDNA基因作为阳性对照,设计引物和探针,进行多重PCR扩增,产物与含特异性探针的芯片杂交。结果表明：该基因芯片可同时特异性地检测5种致病菌,多重PCR检测灵敏度为20pg,而DNA芯片检测灵敏度可达2pg;用所制备的基因芯片检测实际肉及肉制品样品,准确率高于传统培养法。所建立的基因芯片检测方法特异性好、灵敏度高,可为食源性致病菌的检测提供理想手段。     

Textural Properties of Cold-set Gels Induced from Heat-denatured Whey Protein Isolates

A 9% whey protein (WP) isolate solution at pH 7.0 was heat-denatured at 80°C for 30 min. Size-exclusion HPLC showed that native WP formed soluble aggregates after heat-treatment. Additions of CaCl2 (10–40 mM), NaCl (50–400 mM) or glucono-delta-lactone (GDL, 0.4–2.0%, w/v) or hydrolysis by a protease from Bacillus licheniformis caused gelation of the denatured solution at 45°C. Textural parameters, hardness, adhesiveness, and cohesiveness of the gels so formed changed markedly with concentration of added salts or pH by added GDL. Maximum gel hardness occurred at 200 mM NaCl or pH 4.7. Increasing CaCl2 concentration continuously increased gel hardness. Generally, GDL-induced gels were harder than salt-induced gels, and much harder than the protease-induced gel.     

Occurrence of bisphenol-F-diglycidyl ether (BFDGE) in fish canned in oil

The levels of bisphenol-F-diglycidyl ether (BFDGE) were quantified as part of a European survey on the migration of residues of epoxy resins into oil from canned fish. The contents of BFDGE in cans, lids and fish collected from all 15 Member States of the European Union and Switzerland were analysed in 382 samples. Cans and lids were separately extracted with acetonitrile. The extraction from fish was carried out with hexane followed by re-extraction with acetonitrile. The analysis was performed by reverse phase HPL C with fluorescence detection. BFDGE could be detected in 12% of the fish, 24% of the cans and 18% of the lids. Only 3% of the fish contained BFDGE in concentrations considerably above 1mg/kg. In addition to the presented data, a comparison was made with the levels of BADGE (bisphenol-A-diglycidyl ether)analysed in the same products in the context of a previous study.     

Contribution of European research to risk analysis

The European Commission's, Quality of Life Research Programme, Key Action 1—Health, Food & Nutrition is mission-oriented and aims, amongst other things, at providing a healthy, safe and high-quality food supply leading to reinforced consumer confidence in the safety of European food. Its objectives also include the enhancing of the competitiveness of the European food supply. Key Action 1 is currently supporting a number of different types of European collaborative projects in the area of risk analysis. The objectives of these projects range from the development and validation of prevention strategies including the reduction of consumers risks; development and validation of new modelling approaches; harmonization of risk assessment principles, methodologies, and terminology; standardization of methods and systems used for the safety evaluation of transgenic food; providing of tools for the evaluation of human viral contamination of shellfish and quality control; new methodologies for assessing the potential of unintended effects of genetically modified (genetically modified) foods; development of a risk assessment model for Cryptosporidium parvum related to the food and water industries; to the development of a communication platform for genetically modified organism, producers, retailers, regulatory authorities and consumer groups to improve safety assessment procedures, risk management strategies and risk communication; development and validation of new methods for safety testing of transgenic food; evaluation of the safety and efficacy of iron supplementation in pregnant women; evaluation of the potential cancer-preventing activity of pro- and pre-biotic ('synbiotic') combinations in human volunteers. An overview of these projects is presented here.     

低温带皮菜籽粕微粉的不同粒级部分的功能特性

为研究低温带皮菜籽粕微粉的不同粒级部分的功能特性,以经低温脱脂的带皮菜籽粕为原料,经微粉碎后筛分成212~425μm、150~212μm和106~150μm的3个不同粒级的微粉样品,检测这些样品的吸水性、吸油性、乳化性和乳化稳定性、蛋白质体外消化率。结果表明:1 3个不同粒级的微粉样品之间的粗纤维含量存在显著差异,表明三者的结构组成成分有一定差异。23个微粉样品的乳化活性和乳化稳定性随粒度级别的减小而显著增加(P0.01)。33个微粉样品的蛋白质体外消化率随粒度级别的减小而显著增加(P0.01)。4不同粒级带皮菜籽粕微粉样品的吸水性与吸油性受其结构组成物质不同和粒度的双重影响,与粒度的相关性不明显。     

Microbiology of food taints

Fresh and processed foods are often spoilt by the presence of undesirable flavours and odours caused by microbial action. The aim of this paper is to review the current knowledge of microbiologically induced taints that occur in a wide range of foodstuffs, including meats, poultry, fish, crustaceans, milk, dairy products, fruits, vegetables, cereals and cereal products. Examples have been chosen where the compounds responsible for the taint have been identified and sufficient data obtained to demonstrate the involvement of microorganisms. However, in some cases the full identity of the causative organism may not have been elucidated. The types of microorganisms covered by this review include bacteria, fungi, yeasts, actinomycetes and cyanobacteria. Although cyanobacteria do not in general infect foods, their presence in aqueous systems and water supplies can lead to off-flavours in aquatic organisms and processed foodstuffs. Several examples of each of these processes are discussed. Wherever possible, the likely biosynthetic pathway used by the microorganism to produce the offending compound in a foodstuff is indicated.     

Analysis for organic residues from aids to polymerization used to make plastics intended for food contact

Polymers intended for food contact use have been analysed for organic residues which could be attributed to a range of substances employed as polymerization aids (e.g. initiators and catalysts). A wide range of polymers was extracted with solvents and the extracts analysed by gas chromatography-mass spectrometry (GC-MS). The overwhelming majority of substances identified were not derived from aids to polymerization but were oligomers, additives and adventitious contaminants. However, a small number of substances were identified as initiator residues. These included tetramethylsuccinonitrile (TMSN) which was observed in two polymers and it derived from recombination of two azobisisobutyronitrile (AIBN) initiator radicals. Methyl benzoate, benzoic acid, biphenyl and phenyl benzoate were detected in one poly(methyl methacrylate) sample and in two polyvinylchlorides and they are thought to be derived from benzoyl peroxide initiator. TMSN was subsequently targeted for analysis of poly-(methyl methacrylate) plastics using proton nuclear magnetic resonance spectrometry (¹     

Tests of potential functional barriers for laminated multilayer food packages. Part II: Medium molecular weight permeants

Experiments were performed to characterize the kinetics of the permeation of different medium molecular weight model permeants: bisphenol A, warfarin and anthracene, from liquid paraffin, through a surrogate potential functional barrier (25 microns-thick orientated polypropylene--OPP) into the food simulants olive oil and 3% (w/v) acetic acid. The characterization of permeation kinetics generally observed the permeation models previously reported to explain the experimental permeation results obtained for a low molecular weight group of model permeants. In general, the model permeants exhibited behaviour consistent with their relative molecular weights with respect to (a) the time taken to attain steady-state permeation into the food simulant in which they were more soluble, (b) their subsequent steady-state permeation rates, and (c) their partition between liquid paraffin and the OPP membrane.     

The development of reference materials for paralytic shellfish poisoning toxins in lyophilized mussel. I: Interlaboratory studies of methods of analysis

This paper describes the first part of a project undertaken to develop mussel reference materials for Paralytic Shellfish Poisoning (PSP) toxins. Two interlaboratory studies were undertaken to investigate the performance of the analytical methodology for several PSP toxins, in particular saxitoxin (STX) and decarbamoyl-saxitoxin (dc-STX) in lyophilized mussels, and to set criteria for the acceptance of results to be applied during the second part of the project: the certification exercise. In the first study, 18 laboratories were asked to measure STX and dc-STX in rehydrated lyophilized mussel material and to identify as many other PSP toxins as possible with a method of their choice. In the second interlaboratory study, 15 laboratories were additionally asked to determine quantitatively STX and dc-STX in rehydrated lyophilized mussel and in a saxitoxin-enriched mussel material. The first study revealed that three out of four postcolumn derivatization methods and one pre-column derivatization method sufficed in principle to determine STX and dc-STX. Most participants (13 of 18) obtained acceptable calibration curves and recoveries. Saxitoxin was hardly detected in the rehydrated lyophilized mussels and results obtained for dc-STX yielded a CV of 58% at a mass fraction of 1.86 mg/kg. Most participants (14 out of 18) identified gonyautoxin-5 (GTX-5) in a hydrolysed extract provided. The first study led to provisional criteria for linearity, recovery and separation. The second study revealed that 6 out of 15 laboratories were able to meet these criteria. Results obtained for dc-STX yielded a CV of 19% at a mass fraction of 3.49mg/kg. Results obtained for STX in the saxitoxin-enriched material yielded a CV of 19% at a mass fraction of 0.34mg/kg. Saxitoxin could not be detected in the PSP-positive material. Hydrolysis was useful to confirm the identity of GTX5 and provided indicative information about C1 and C2 toxins in the PSP-positive material. The methods used in the second interlaboratory study showed sufficiently consistent analysis results to undertake a certification exercise to assign certified values for STX and dc-STX in lyophilized mussel.     

The Ministry of Environmental Protection Issued "Feasible Technology Guidelines for Pollution Prevention and Control in Wood Pulping Process of the Paper Industry (Trial)" and Two Other Guiding Technical Documents

On December 27t＂, 2013, the Ministry of Environmenta Protection announced that, in order to implement ＂The Environmental Protection Law of the People＇ s Republic of China＂, improve the working system in environmenta protection technologies, and promote technologica advancement in pollution prevention, the Ministry of Environmental Protection sponsored the formulation of three guiding technical documents including ＂Feasible Technology Guidelines for Pollution Prevention and Contro n Wood Pulping Process of the Paper Industry （Trial）＂     

1~(st) Intelli-Tissue~ EcoEc Tissue Machine Supplied by PMP Group Successfully Put into Operation in China

正On April 29th,2014,Intelli-Tissue EcoEc tissue machine supplied by PMP Group successfully put into operation at Hebei Xuesong Paper Co.,Ltd.,this is the first such kind of paper machine of PMP Group in China.