通过型固相萃取净化-超高效液相色谱-串联质谱法检测鸡肉中23种磺胺类药物残留

建立了通过型固相萃取净化超高效液相色谱-串联质谱法同时检测鸡肉中23种磺胺类药物残留的分析方法。鸡肉样品经80%乙腈溶液（含0.2%甲酸）提取,Oasis PRiME HLB固相萃取柱进行净化,用Waters Acquity UPLC CSH C18色谱柱（100 mm×2.1 mm,1.7 μm）分离,以甲醇和0.1%甲酸溶液为流动相梯度洗脱,电喷雾源正离子扫描及依赖保留时间的多反应监测模式下（Scheduled MRM）检测,外标法定量。结果表明:23种磺胺类药物在线性范围0.2~20 ng/mL上有良好的线性关系,相关系数均大于0.9996;检出限为0.1~2.0 μg/kg,定量限为0.25~5.0 μg/kg;在1.0、2.0、5.0 μg/kg三个加标水平上平均回收率为66.12%~99.83%,相对标准偏差（RSD,n=6）为0.72%~10.36%;该方法操作简单、灵敏度高、重现性好,适用于鸡肉中多种磺胺类药物残留的检测。     

液相色谱-串联质谱法测定鸡肉中磺胺及其增效剂残留量

建立鸡肉中122种磺胺及1种增效剂多残留检测的液相色谱-串联质谱法。样品经过甲酸-乙腈(1:199,V/V)溶液提取,正己烷脱脂,液-液分配净化后,C_(18)柱分离,甲醇、甲酸-水(体积分数0.1%)为流动相梯度洗脱,采用电喷雾电离源(electrospray ionization,ESI)正离子多反应检测(multiple reaction monitoring,MRM)模式检测,外标法定量。结果表明:药物在2.0~100.0μg/L质量浓度范围内线性关系良好,相关系数均大于0.99,方法的检出限和定量限分别为0.5μg/kg和2.0μg/kg,在添加量为2.0、5.0、10.0μg/kg时回收率为61.8%~88.3%,相对标准偏差小于11.3%。该方法简便快捷,可用于鸡肉中磺胺类药物及其增效剂的多残留检测。     

液相色谱-串联质谱法测定猪肉中13种磺胺类药物残留

利用液相色谱-电喷雾串联质谱建立猪肉中13种磺胺类药物残留的同时、快速分析方法.猪肉样品中的残留药物用1%乙酸-乙腈均质提取,浓缩后用0.1%甲酸-乙腈定容,并用正己烷液-液分配除脂后,用Kinetex C18色谱柱(100mm×2.1mm,2.6μm)分离,以0.1%甲酸-乙腈作为流动相梯度洗脱,采用电喷雾正离子电离,多反应监测模式检测,基质匹配外标法定量.13种磺胺类药物在1~300μg/kg范围内线性关系良好,定量限均小于10μg/kg.在1、2μg/kg和10μg/kg这3个添加水平下,回收率在60.0%~78.1%之间,相对标准偏差(RSD)在0.24%~8.88%之间.此方法操作简便,灵敏度、准确度、精密度均满足残留分析的要求.     

超高效液相色谱-串联质谱法同时测定鳗鱼中32种兽药残留

目的 建立超高效液相色谱-串联质谱法(ultra performance liquid chromatography-tandem mass spectrometry, UPLC-MS/MS)同时测定鳗鱼中13种磺胺类、15种喹诺酮类和4种四环素类兽药残留的分析方法。方法 鳗鱼试样采用乙二胺四乙酸二钠(ethylenediaminetetraacetic acid disodium salt, Na2EDTA)-Mcllvaine提取液进行提取, HLB固相萃取柱净化, Waters ACQUITY UPLC BEH C18色谱柱分离, 以0.1%甲酸乙腈和0.1%甲酸水溶液作为流动相进行梯度洗脱; 电喷雾正离子模式下, 以多反应监测(multiple reaction monitoring, MRM)方式采集数据进行定性与定量分析, 外标法定量。结果 磺胺类、喹诺酮类及四环素类药物分别在2~50、2~50、5~100 μg/kg浓度范围内线性相关性良好, 相关系数均大于0.99; 不同加标水平的平均回收率为82.6%~110.2%, 相对标准偏差(relative standard deviations, RSDs)为3.2%~13.9%, 检出限(limits of detection, LODs)和定量限(limits of quantification, LOQs)分别为0.3~2.0 μg/kg和1.0~5.0 μg/kg。结论 本方法快速简便、灵敏可靠, 适合大批量鳗鱼中同时快速对磺胺类、喹诺酮类及四环素类兽药残留进行定性和定量检测。     

UPLC-MS/MS法检测运动营养品中磺胺类药物的残留

建立一种超高效液相色谱-串联质谱法检测动物源性运动营养品中9种磺胺类药物残留的分析方法。样品前处理用乙醇沉淀蛋白后,采用HLB小柱进行净化和富集。采用Waters Atalantis T3色谱柱(2.1 mm×150 mm,3μm)分离,以0.1%甲酸-乙腈为流动相的梯度洗脱模式下,9种磺胺类药物在1.0~20.0 ng/m L浓度范围内线性良好,相关系数R2为0.994~0.999,检出限均为4.0μg/kg,定量限均为13.0μg/kg。当分别添加10,50和100μg/kg等3个浓度的标准混合溶液时,加标回收率达到80.6%~92.2%。该方法具有前处理简单、净化效果好、灵敏度高和检测速度快的优点,适用于动物源性运动营养品中磺胺类药物残留的分析和定量检测。     

液相色谱–串联质谱法检测猪肉中5种磺胺类药物残留

目的建立液相色谱-串联质谱法(liquid chromatography-tandem mass spectrometry,LC-MS/MS)测定猪肉组织中5种磺胺类药物残留的方法。方法猪肉样品中的残留药物经乙腈提取后用正己烷去除脂肪,经氮吹浓缩后用初始流动相浴解定容。用Shim-pack GIST C_(18)色谱柱(150 mm×2.1 mm,5μm)分离,以0.1%甲酸-水溶液和0.1%甲酸-0.1%乙腈溶液为流动相进行梯度洗脱,质谱采用多反应监测模式对5种磺胺类药物的定量离子和定性离子进行监测,以外标法定量。结果本方法在6.5 min内完成5种目标化合物的分离分析。5种磺胺类药物在0.5～50μg/kg范围内线性关系良好,相关系数r2为0.9980～0.9999,在5、10、20μg/L添加水平的回收率为(59.96±1.71)%～(96.09±0.54)%,日内相对标准偏差(relative standard deviation,RSD)为1.32%～2.99%,日间RSD为0.41%～0.94%(n=5),方法定量限均小于5μg/kg。结论该方法操作快速、灵敏、准确,可用于猪肉组织中5种磺胺类药物的残留检测。     

液相色谱-串联质谱快速检测禽类组织中 黄霉素A残留量

目的 建立检测禽类组织(肌肉、脂肪、肝脏、肾脏)中黄霉素A残留的超快速液相色谱-四极杆/线性离子阱质谱方法。方法 混合均匀的试样经10%氨化甲醇提取, 乙腈沉降蛋白净化后, 以0.3%甲酸-5%乙腈-水溶液和0.3%甲酸?5%水-乙腈为流动相, 使用Agilent Poroshell 120 SB-C18(100 mm×2.1 mm, 2.7 μm)色谱柱超快速液相色谱分离, 优化多反应检测(selected multiple reaction monitorin g, sMRM)模式检测, 外标法定量。结果 黄霉素A在20~200 μg/L线性范围内线性关系良好(r≥0.995); 黄霉素A定量限(limit of quantity, LOQ, S/N≥10)为10 μg/kg; 3个添加水平(10、20 和100 μg/kg)下的回收率为66.5%~89.4%; 相对标准偏差(relative standard deviation, RSD)为4.7%~10.2%。结论 该方法快速、准确、灵敏, 可有效用于禽类组织中黄霉素A残留的测定。     

分散固相萃取-超高效液相色谱-串联质谱法测定豆芽中6种喹诺酮类药物

本文建立了豆芽中恩诺沙星、环丙沙星、氧氟沙星、诺氟沙星、洛美沙星、培氟沙星6种喹诺酮类药物残留的分散固相萃取-超高效液相色谱-串联质谱的快速测定方法。豆芽样品中6种喹诺酮药物采用1%甲酸乙腈提取,提取液经N-丙基乙二胺(PSA)、十八烷基键合硅胶(C₁₈)、无水硫酸镁(MgSO₄)、石墨化碳(GCB)4种填料净化,净化液过滤膜后经ACQUITY UPLC BEH C₁₈色谱柱,甲醇-0.1%甲酸水流动相梯度分离,采用UPLC-MS/MS多反应监测模式进行测定,同位素内标法定量。结果显示:6种喹诺酮类药物在1.0~100.0 μg/L浓度范围内线性关系良好(r≥0.9982),检出限为0.1~0.3 μg/kg,定量限为0.3~1.0 μg/kg,在2、4、20 μg/kg三个浓度添加水平的回收率为96.53%~106.94%,相对标准偏差为2.73%~7.60%。该方法快速简便、灵敏度高、准确度高、重现性好,适用于豆芽样品中6种喹诺酮类药物的同时检测。     

液相色谱-串联质谱法检测蜂蜜中15种喹诺酮类和17种磺胺类药物残留

目的建立同时测定蜂蜜中15种喹诺酮和17种磺胺类药物残留的液相色谱-串联质谱(liquid chromatography-tandem mass spectrometry,HPLC-MS/MS)检测方法。方法样品经过磷酸盐缓冲溶液(pH=8)提取,过HLB(hydrophile-lipophile balance)固相萃取柱净化。以CORTECS C18色谱柱(2.1 mm×100 mm,1.6μm)分离,以5 mmol乙酸铵、0.1%甲酸水(A)和0.1%甲酸-乙腈(B)作为流动相进行梯度洗脱。质谱分析以电喷雾为离子源(electrospray ionization,ESI+),采用多反应监测(multiple reaction monitoring,MRM)。结果本方法在15 min内完成32种目标化合物的分离。15种喹诺酮和17种磺胺类药物在1.0、5.0和10.0μg/kg添加水平的回收率为54.9%~122.5%,相对标准偏差(relative standard deviation,RSD)小于18.7%(n=6),方法检出限为0.4μg/kg,定量限为1.0μg/kg。结论该方法快速、准确、灵敏,适合测定蜂蜜中喹诺酮和磺胺类药物残留。     

超高效液相色谱-串联质谱法同时检测动物源性食品中22种兽药残留

目的 建立了超高效液相色谱-串联质谱法（ultra performance liquid chromatography-tandem mass spectrometry, UPLC-MS/MS）同时测定猪肉、牛肉、鸡肉、水产等动物源性食品中6种β-受体激动剂类、8种磺胺类、氯霉素、氟苯尼考、金刚乙胺、金刚烷胺、孔雀石绿、隐色孔雀石绿、地西泮、地塞米松等22种兽药残留量的方法。方法 样品分别用乙腈、2%甲酸乙腈和90%乙腈水（含0.1%甲酸）提取,提取液在40 ℃下氮气吹干后用10%乙腈水（含1%甲酸）溶液复溶,采用C18色谱柱分离,以电喷雾离子源在正、负离子多反应监测模式下进行测定。 结果 22种兽药用2%甲酸乙腈作为提取溶剂时,回收率均较高;在 0.2 ～ 40 μg/kg的浓度范围内呈现良好的线性关系,r均大于0.998,定量限范围为0.2~ 1.0 μg/kg;加标水平为 1、 5、 10 μg/kg时,回收率在62.6% ～ 120%之间,相对标准偏差为1.4% ~ 11%。结论 该方法简单、快速、准确、灵敏,极大地提高了多残留兽药的检测效率,适用于食品安全突发事件应急处置中多残留兽药的快速分析,对动物源性食品中药物残留的监控具有很重要的现实意义。     

Textural Properties of Cold-set Gels Induced from Heat-denatured Whey Protein Isolates

A 9% whey protein (WP) isolate solution at pH 7.0 was heat-denatured at 80°C for 30 min. Size-exclusion HPLC showed that native WP formed soluble aggregates after heat-treatment. Additions of CaCl2 (10–40 mM), NaCl (50–400 mM) or glucono-delta-lactone (GDL, 0.4–2.0%, w/v) or hydrolysis by a protease from Bacillus licheniformis caused gelation of the denatured solution at 45°C. Textural parameters, hardness, adhesiveness, and cohesiveness of the gels so formed changed markedly with concentration of added salts or pH by added GDL. Maximum gel hardness occurred at 200 mM NaCl or pH 4.7. Increasing CaCl2 concentration continuously increased gel hardness. Generally, GDL-induced gels were harder than salt-induced gels, and much harder than the protease-induced gel.     

Occurrence of bisphenol-F-diglycidyl ether (BFDGE) in fish canned in oil

The levels of bisphenol-F-diglycidyl ether (BFDGE) were quantified as part of a European survey on the migration of residues of epoxy resins into oil from canned fish. The contents of BFDGE in cans, lids and fish collected from all 15 Member States of the European Union and Switzerland were analysed in 382 samples. Cans and lids were separately extracted with acetonitrile. The extraction from fish was carried out with hexane followed by re-extraction with acetonitrile. The analysis was performed by reverse phase HPL C with fluorescence detection. BFDGE could be detected in 12% of the fish, 24% of the cans and 18% of the lids. Only 3% of the fish contained BFDGE in concentrations considerably above 1mg/kg. In addition to the presented data, a comparison was made with the levels of BADGE (bisphenol-A-diglycidyl ether)analysed in the same products in the context of a previous study.     

Contribution of European research to risk analysis

The European Commission's, Quality of Life Research Programme, Key Action 1—Health, Food & Nutrition is mission-oriented and aims, amongst other things, at providing a healthy, safe and high-quality food supply leading to reinforced consumer confidence in the safety of European food. Its objectives also include the enhancing of the competitiveness of the European food supply. Key Action 1 is currently supporting a number of different types of European collaborative projects in the area of risk analysis. The objectives of these projects range from the development and validation of prevention strategies including the reduction of consumers risks; development and validation of new modelling approaches; harmonization of risk assessment principles, methodologies, and terminology; standardization of methods and systems used for the safety evaluation of transgenic food; providing of tools for the evaluation of human viral contamination of shellfish and quality control; new methodologies for assessing the potential of unintended effects of genetically modified (genetically modified) foods; development of a risk assessment model for Cryptosporidium parvum related to the food and water industries; to the development of a communication platform for genetically modified organism, producers, retailers, regulatory authorities and consumer groups to improve safety assessment procedures, risk management strategies and risk communication; development and validation of new methods for safety testing of transgenic food; evaluation of the safety and efficacy of iron supplementation in pregnant women; evaluation of the potential cancer-preventing activity of pro- and pre-biotic ('synbiotic') combinations in human volunteers. An overview of these projects is presented here.     

低温带皮菜籽粕微粉的不同粒级部分的功能特性

为研究低温带皮菜籽粕微粉的不同粒级部分的功能特性,以经低温脱脂的带皮菜籽粕为原料,经微粉碎后筛分成212~425μm、150~212μm和106~150μm的3个不同粒级的微粉样品,检测这些样品的吸水性、吸油性、乳化性和乳化稳定性、蛋白质体外消化率。结果表明:1 3个不同粒级的微粉样品之间的粗纤维含量存在显著差异,表明三者的结构组成成分有一定差异。23个微粉样品的乳化活性和乳化稳定性随粒度级别的减小而显著增加(P0.01)。33个微粉样品的蛋白质体外消化率随粒度级别的减小而显著增加(P0.01)。4不同粒级带皮菜籽粕微粉样品的吸水性与吸油性受其结构组成物质不同和粒度的双重影响,与粒度的相关性不明显。     

Microbiology of food taints

Fresh and processed foods are often spoilt by the presence of undesirable flavours and odours caused by microbial action. The aim of this paper is to review the current knowledge of microbiologically induced taints that occur in a wide range of foodstuffs, including meats, poultry, fish, crustaceans, milk, dairy products, fruits, vegetables, cereals and cereal products. Examples have been chosen where the compounds responsible for the taint have been identified and sufficient data obtained to demonstrate the involvement of microorganisms. However, in some cases the full identity of the causative organism may not have been elucidated. The types of microorganisms covered by this review include bacteria, fungi, yeasts, actinomycetes and cyanobacteria. Although cyanobacteria do not in general infect foods, their presence in aqueous systems and water supplies can lead to off-flavours in aquatic organisms and processed foodstuffs. Several examples of each of these processes are discussed. Wherever possible, the likely biosynthetic pathway used by the microorganism to produce the offending compound in a foodstuff is indicated.     

Analysis for organic residues from aids to polymerization used to make plastics intended for food contact

Polymers intended for food contact use have been analysed for organic residues which could be attributed to a range of substances employed as polymerization aids (e.g. initiators and catalysts). A wide range of polymers was extracted with solvents and the extracts analysed by gas chromatography-mass spectrometry (GC-MS). The overwhelming majority of substances identified were not derived from aids to polymerization but were oligomers, additives and adventitious contaminants. However, a small number of substances were identified as initiator residues. These included tetramethylsuccinonitrile (TMSN) which was observed in two polymers and it derived from recombination of two azobisisobutyronitrile (AIBN) initiator radicals. Methyl benzoate, benzoic acid, biphenyl and phenyl benzoate were detected in one poly(methyl methacrylate) sample and in two polyvinylchlorides and they are thought to be derived from benzoyl peroxide initiator. TMSN was subsequently targeted for analysis of poly-(methyl methacrylate) plastics using proton nuclear magnetic resonance spectrometry (¹     

Tests of potential functional barriers for laminated multilayer food packages. Part II: Medium molecular weight permeants

Experiments were performed to characterize the kinetics of the permeation of different medium molecular weight model permeants: bisphenol A, warfarin and anthracene, from liquid paraffin, through a surrogate potential functional barrier (25 microns-thick orientated polypropylene--OPP) into the food simulants olive oil and 3% (w/v) acetic acid. The characterization of permeation kinetics generally observed the permeation models previously reported to explain the experimental permeation results obtained for a low molecular weight group of model permeants. In general, the model permeants exhibited behaviour consistent with their relative molecular weights with respect to (a) the time taken to attain steady-state permeation into the food simulant in which they were more soluble, (b) their subsequent steady-state permeation rates, and (c) their partition between liquid paraffin and the OPP membrane.     

The development of reference materials for paralytic shellfish poisoning toxins in lyophilized mussel. I: Interlaboratory studies of methods of analysis

This paper describes the first part of a project undertaken to develop mussel reference materials for Paralytic Shellfish Poisoning (PSP) toxins. Two interlaboratory studies were undertaken to investigate the performance of the analytical methodology for several PSP toxins, in particular saxitoxin (STX) and decarbamoyl-saxitoxin (dc-STX) in lyophilized mussels, and to set criteria for the acceptance of results to be applied during the second part of the project: the certification exercise. In the first study, 18 laboratories were asked to measure STX and dc-STX in rehydrated lyophilized mussel material and to identify as many other PSP toxins as possible with a method of their choice. In the second interlaboratory study, 15 laboratories were additionally asked to determine quantitatively STX and dc-STX in rehydrated lyophilized mussel and in a saxitoxin-enriched mussel material. The first study revealed that three out of four postcolumn derivatization methods and one pre-column derivatization method sufficed in principle to determine STX and dc-STX. Most participants (13 of 18) obtained acceptable calibration curves and recoveries. Saxitoxin was hardly detected in the rehydrated lyophilized mussels and results obtained for dc-STX yielded a CV of 58% at a mass fraction of 1.86 mg/kg. Most participants (14 out of 18) identified gonyautoxin-5 (GTX-5) in a hydrolysed extract provided. The first study led to provisional criteria for linearity, recovery and separation. The second study revealed that 6 out of 15 laboratories were able to meet these criteria. Results obtained for dc-STX yielded a CV of 19% at a mass fraction of 3.49mg/kg. Results obtained for STX in the saxitoxin-enriched material yielded a CV of 19% at a mass fraction of 0.34mg/kg. Saxitoxin could not be detected in the PSP-positive material. Hydrolysis was useful to confirm the identity of GTX5 and provided indicative information about C1 and C2 toxins in the PSP-positive material. The methods used in the second interlaboratory study showed sufficiently consistent analysis results to undertake a certification exercise to assign certified values for STX and dc-STX in lyophilized mussel.     

The Ministry of Environmental Protection Issued "Feasible Technology Guidelines for Pollution Prevention and Control in Wood Pulping Process of the Paper Industry (Trial)" and Two Other Guiding Technical Documents

On December 27t＂, 2013, the Ministry of Environmenta Protection announced that, in order to implement ＂The Environmental Protection Law of the People＇ s Republic of China＂, improve the working system in environmenta protection technologies, and promote technologica advancement in pollution prevention, the Ministry of Environmental Protection sponsored the formulation of three guiding technical documents including ＂Feasible Technology Guidelines for Pollution Prevention and Contro n Wood Pulping Process of the Paper Industry （Trial）＂     

1~(st) Intelli-Tissue~ EcoEc Tissue Machine Supplied by PMP Group Successfully Put into Operation in China

正On April 29th,2014,Intelli-Tissue EcoEc tissue machine supplied by PMP Group successfully put into operation at Hebei Xuesong Paper Co.,Ltd.,this is the first such kind of paper machine of PMP Group in China.